Influence of constructive features of symmetric data transmission chains on the process of optimizing the physical level of infocommunication systems

Author(s):  
А. B. Semenov ◽  
A. L. Zubilevich ◽  
T. S. Abbasova

The influence of the twisting steps of twisted pairs of horizontal LAN cables of category 6 on the primary and key secondary parameters of the electrical transmission medium of infocommunication systems is investigated. The primary parameters are investigated, which make it possible to determine the secondary parameters of a symmetrical conductive path: wave impedance and attenuation coefficient. It is shown that, with respect to a twisted pair with the smallest twist pitch, it is expedient to apply the high-frequency model to calculate the electric transmission path.

2001 ◽  
Vol 16 (2) ◽  
pp. 157-166 ◽  
Author(s):  
S. Siami ◽  
C. Joubert ◽  
C. Glaize

Author(s):  
Vladimir Barannik ◽  
Andrii Krasnorutsky ◽  
Sergii Shulgin ◽  
Valerii Yeroshenko ◽  
Yevhenii Sidchenko ◽  
...  

The subject of research in the article are the processes of video image processing using an orthogonal transformation for data transmission in information and telecommunication networks. The aim is to build a method of compression of video images while maintaining the efficiency of its delivery at a given informative probability. That will allow to provide a gain in the time of delivery of compressed video images, a necessary level of availability and authenticity at transfer of video data with preservation of strictly statistical regulations and the controlled loss of quality. Task: to study the known algorithms for selective processing of static video at the stage of approximation and statistical coding of the data based on JPEG-platform. The methods used are algorithm based on JPEG-platform, methods of approximation by orthogonal transformation of information blocks, arithmetic coding. It is a solution of scientific task-developed methods for reducing the computational complexity of transformations (compression and decompression) of static video images in the equipment for processing visual information signals, which will increase the efficiency of information delivery.The following results were obtained. The method of video image compression with preservation of the efficiency of its delivery at the set informative probability is developed. That will allow to fulfill the set requirements at the preservation of structural-statistical economy, providing a gain in time to bring compressed images based on the developed method, relative to known methods, on average up to 2 times. This gain is because with a slight difference in the compression ratio of highly saturated images compared to the JPEG-2000 method, for the developed method, the processing time will be less by at least 34%.Moreover, with the increase in the volume of transmitted images and the data transmission speed in the communication channel - the gain in the time of delivery for the developed method will increase. Here, the loss of quality of the compressed/restored image does not exceed 2% by RMS, or not worse than 45 dB by PSNR. What is unnoticeable to the human eye.Conclusions. The scientific novelty of the obtained results is as follows: for the first time the method of classification (separate) coding (compression) of high-frequency and low-frequency components of Walsh transformants of video images is offered and investigated, which allows to consider their different dynamic range and statistical redundancy reduced using arithmetic coding. This method will allow to ensure the necessary level of availability and authenticity when transmitting video data, while maintaining strict statistical statistics.Note that the proposed method fulfills the set tasks to increase the efficiency of information delivery. Simultaneously, the method for reducing the time complexity of the conversion of highly saturated video images using their representation by the transformants of the discrete Walsh transformation was further developed. It is substantiated that the perspective direction of improvement of methods of image compression is the application of orthogonal transformations on the basis of integer piecewise-constant functions, and methods of integer arithmetic coding of values of transformant transformations.It is substantiated that the joint use of Walsh transformation and arithmetic coding, which reduces the time of compression and recovery of images; reduces additional statistical redundancy. To further increase the degree of compression, a classification coding of low-frequency and high-frequency components of Walsh transformants is developed. It is shown that an additional reduction in statistical redundancy in the arrays of low-frequency components of Walsh transformants is achieved due to their difference in representation. Recommendations for the parameters of the compression method for which the lowest value of the total time of information delivery is provided are substantiated.


2015 ◽  
Vol 643 ◽  
pp. 141-147
Author(s):  
Yasushi Yuminaka ◽  
Yuuki Takada

As the Required Data Rate for VLSI System Communication Increases, Channel Bandwidthlimitation Becomes a Crucial Problem as High-Frequency Channel Loss Degrades the Transmission Performance.In this Paper, we Compare Non-Return-to-Zero (NRZ) Binary and 4-PAM (pulse Amplitudemodulation) Coding Techniques for High-Speed Data Transmission by Fabricating a Test Board of a Microstripline. by Extracting the Micro-Strip Line Parameters, we Carry out Co-Simulations to Evaluate Spectrallyefficient Coding for High-Speed Data Transmission.We Consider the Conditions for which 4-Pamsignaling Provides an Advantage over NRZ Signaling from the Viewpoint of Channel Profiles.


2005 ◽  
Vol 475-479 ◽  
pp. 257-260 ◽  
Author(s):  
Jai Won Byeon ◽  
C.S. Kim ◽  
S.I. Kwun ◽  
S.J. Hong

It was attempted to assess nondestructively the degree of isothermal degradation of 2.25Cr-1Mo steel by using high frequency longitudinal ultrasonic wave. Microstructural parameter (mean size of carbides), mechanical property (Vickers hardness) and ultrasonic attenuation coefficient were measured for the 2.25Cr-1Mo steel isothermally degraded at 630°C for up to 4800 hours in order to find the correlation among these parameters. The ultrasonic attenuation coefficients at high frequencies (over 35MHz) were observed to increase rapidly in the initial 1000 hours of degradation time and then slowly thereafter, while the ones at low frequencies showed no noticeable increase. Ultrasonic attenuation at high frequencies increased as a function of mean size of carbides. Ultrasonic attenuation coefficient was found to have a linear correlation with the hardness, and suggested accordingly as a potential nondestructive evaluation parameter for assessing the mechanical strength reduction of the isothermally degraded 2.25Cr-1Mo steel.


Sign in / Sign up

Export Citation Format

Share Document