scholarly journals Yield, Lint and Yarn Quality Properties of Some Egyptian Cotton Varieties as Affect By Some Natural Extracts and Mineral Fertilization Rates

2021 ◽  
Vol 59 (3) ◽  
pp. 707-720
Author(s):  
El-Saeed El-Gedwy
2021 ◽  
Author(s):  
Cevher İlhan Cevheri

Abstract Cotton fibers are the most important raw material of the textile industry. Clean collection of cotton fibers increases the quality of textile products and the market prices. This study was conducted to investigate the effects of normal and late harvest period of different cotton varieties on cotton fiber and yarn properties. The quality properties of the fibers were determined with the HVI device, and the quality properties of the yarns obtained from the fibers were determined with the USTER TESTER device. The fiber quality properties such as fiber fineness (micronaire), fiber maturity, fiber length (UHML, mm), strength (g/tex), brightness/whiteness (Rd), and yarn quality properties such as yarn evenness (%), thin places, neps+200 (%) and hairiness were investigated in the study. The exposure of fibers to rain during the harvest period of 2018 caused a decrease in the quality properties. Inability of the plants to receive sufficient sunlight during the last physiological development period caused a decrease in photosynthesis rate. This negative situation negatively affected the physical quality properties of fiber and yarn. The results indicated that the physical quality properties of fibers and yarns obtained in 2019 were higher than those in 2018. The aim of this study was to determine the effect of late harvest period on fiber and yarn quality properties and thus on quality of textile products. In addition, the study was carried out to guide researchers who will conduct researchers on similar topics.


2021 ◽  
Vol 3 (5) ◽  
pp. 90-96
Author(s):  
Eman Rashwan El-Sayed ◽  
Eman Yehia Abd-Elkawe

The current research was carried out to produce fine count yarns from extra-long Egyptian cotton varieties using compact and ring spinning systems.in addition, to compare between compact yarns and ring yarns in terms of their physical and mechanical properties. Three commercial extra-long staple Egyptian cottons Giza92, Giza93 and Giza 96 were used to produce four linear densities of 80, 100, 120 and 140 at 3.6 twist multiplier. Results obtained showed that Giza 92 was surpassed significantly other extra -long staple varieties. It recorded the highest mean values of yarn strength and yarn evenness While, the same variety recorded the lowest mean values of yarn hairiness and imperfections. Compact yarns were much better than yarns spun on the ring spinning in yarn strength, yarn elongation, evenness, yarn imperfections and yarn hairiness. Yarn count 80,s gave higher single yarn strength (20.89cN/tex), yarn elongation (5.03%) and yarn evenness (17.49%) and lower yarn hairiness (2.04) and imperfections than yarn count 140s. Single yarn strength, yarn elongation and yarn evenness were decreased with increasing yarn count. While the number of neps, hairiness, the number of thin and thick places were increased with increasing yarn count. Concerning, the effect of interaction between cotton varieties × yarn counts × spinning systems on yarn quality properties. Yarn count 80s recorded the highest mean values of yarn strength (23.14, 21.1 and 20.2 cN/tex) and yarn evenness (17.72, 16.53 and 16.79%) for varieties Giza92, Giza93 and Giza96, respectively for compact spinning system. Yarn strength at count 80, 100, 120 and 140 correlated negatively and highly significant with micronaire value and maturity ratio.


Author(s):  
Martynas KEMESIUS ◽  
Gerda SILINGIENE ◽  
Regina VASINAUSKIENE ◽  
Remigijus ZALKAUSKAS

The usage of biodegradable waste as sewage sludge in a proper way for tree nurseries enable to seek for ecological, waste-less, alternative to mineral fertilization farming ways. The aim of this research is to investigate impact of sewage sludge fertilizers on Norway spruce (Picea abies) two years’ seedlings growth. Research has been done in 2013-2014 at Utena State Forest Enterprise nursery. The different fertilization rates (20, 40, 60, 80, 100 t/ha) of sewage sludge were investigated and compared with control – traditional fertilization with mineral fertilizers. The impact of sewage sludge was evaluated by seedlings biometric indicators, also dry mass of sample seedlings (medium seedlings by height and diameter). The bigger rates of sewage sludge showed almost better results in exception of seeds outlet. Sewage sludge has long lasting effect on seedlings growth and could successfully shift soil fertilization by mineral fertilizers. The obtained research results confirm the similar research carried out in 2011 in Rokiskis State Forest Enterprise nursery for first year Norway Spruce seedlings.


Author(s):  
Aly A. A. El-Banna

Aims: Attaining the highest ginning efficiency process and fiber quality properties of Egyptian cotton cultivar ̔ Giza 88᾿during feeding methods of roller gin stand is the ultimate objective of the community of cotton field industry for local uses, but the productivity of the three feeding methods of conventional roller gin stand used in ginning process still limited. Therefore, the aim of this investigation is to overcome this obstacle. Study Design: This investigation was conducted in a completely randomized design with three replicates and analyzed as a factorial experiment. Place and Duration of Study: Plant Production Department, the Faculty of Agriculture (Saba Basha), Alexandria University, Egypt during 2017. Methods: Four seed cotton grades; namely, Good to Fully Good (G/FG), Good + ¼ (G + ¼), Good (G) and Good -¼ (G - ¼) belonging to ̔ Giza 88᾿ cotton cultivar were used in this work. The extra-long staple Egyptian cotton variety with the pedigree and origin of cotton Giza 88 (Giza 77 x Giza 45 B) was used. This work was carried out in 2017. About half cantar (1 cantar = 157.5 kg) of each seed cotton grade as a bulk sample was thoroughly mixed and checked and  reclassified by a committee of three expert classers belong to the Cotton Arbitration for Testing General Organization (CATGO), in the gin plan. Results: The obtained results indicated that the gin stand's hand feeding method (control treatment); results in significant increases the highest mean values of the gin stand capacity (0.97 kg lint/inch/h), Lint % (36.59%) and lint grade code (27.33) and the lowest mean value of the ginning time (1.42 h/cantar). Meanwhile, the Belt (2 row) as a mechanical feeding method; gave rise to the lowest mean value of gin stand capacity (0.89 kg lint/inch/h). The differences in fiber length parameters (Upper half mean length and short fiber index), fiber elongation %, micronaire reading, yellowness degree (+b) were not significantly affected. The highest seed cotton grade (Good / Fully Good) gave the better lint cotton grade and the best fiber properties tested by HVI instrument of ̔ Giza 88᾿ cotton cultivar. Conclusion: The hand feeding method of seed cotton to the gin stand surpassed all studied feeding methods in gin stand productivity, lint percentage and the most HVI fiber properties are better classer grade. Though, this method is recommended to be used specially with the high levels of the extra-long cottons. Cylinder feeding method ranked first in order among studied mechanical method and it could be recommended for ginning medium and low seed cotton level. Belt (2 rows) is the preferred feeding method regardless of gin stand productivity.


Sign in / Sign up

Export Citation Format

Share Document