scholarly journals DEVELOPMENT OF PLANT LEAF AREA MEASUREMENT APPARATUS

2017 ◽  
Vol 95 (2) ◽  
pp. 851-860
Author(s):  
ABED EL WAHB R. OBAIA ◽  
ABD EL FATAH M. DREES
2021 ◽  
Vol 2021 ◽  
pp. 1-11
Author(s):  
Li-fen Tu ◽  
Qi Peng ◽  
Chun-sheng Li ◽  
Aiqun Zhang

In order to measure the plant leaf area conveniently and quickly in an indoor laboratory and outdoor field, a set of scaffold leaf area measurement systems was designed and manufactured. A 2D in situ method for measuring plant leaf area with camera correction and background color calibration was proposed. The method integrates three subalgorithms: fast calibration and distortion correction algorithm, background color calibration algorithm, and edge error correction algorithm. At the same time, the Visual Studio 2015 and OpenCV 3.4.0 were used to develop and test the algorithm. In order to verify the measurement speed and environmental adaptability of the system, the test was carried out in the complex light disturbance outdoors, and the results were consistent with those in the room. In order to verify the measurement accuracy of the system, this method was used to measure the standard rectangular gauge block of known area and the real leaf area, respectively, and its data were compared with the data measured by Wanshen LA-S plant image analyzer. The results show that both methods have a good stability, and the algorithm proposed in this paper performs better in measurement accuracy and environmental adaptability.


2012 ◽  
Vol 182-183 ◽  
pp. 624-628
Author(s):  
Dian Yuan Han

This paper concerns the plant leaf area measurement based on improved image processing. Firstly, the referenced rectangle was detected with 2-side scanning method. Then the leaf region was segmented according to 2G-R-B of every pixel with two different thresholds, and by using of dilatation operation, the trimap of leaf image was got. Next the pixels in unknown area were classified to the foreground or background area with improved knockout method and the exact leaf was segmented. Lastly, the leaf area was calculated according to the pixels proportion between leaf region and the referenced rectangle. Experiment results show this method has good accuracy and rapid speed.


Author(s):  
Mikhail Astashev ◽  
Olga Beloshapkina ◽  
Andrey Kvitko ◽  
Alexey Matasov ◽  
Roman Zakharyan ◽  
...  
Keyword(s):  

2017 ◽  
Vol 30 (2) ◽  
pp. 412-419 ◽  
Author(s):  
ARTHUR BERNARDES CECÍLIO FILHO ◽  
ALEXSON FILGUEIRAS DUTRA ◽  
GILSON SILVERIO DA SILVA

ABSTRACT The intensive cultivation of vegetables with frequent chemical fertilization may cause accumulation of nutrients in the soil. This, in turn, may reduce crop yields and damage the environment due to contamination of ground water and rivers. Thus, to increase the effects of P (0, 100, 200, 300 and 400 kg ha -1 of P2O5) and K (0, 60, 120, 180 and 240 kg ha-1 of K2O) doses on the growth and productivity of radish cultivars (Sakata 19 and Sakata 25) in a soil with high levels of these nutrients, two experiments were conducted in randomized blocks with the factors cultivars and doses arranged in a 2 x 5 factorial design with three replications. Number of leaves per plant, leaf area, shoot and root dry mass, total and commercial productivity, percentage of cracked roots and P and K contents in the plant and in the soil were evaluated. The Sakata 19 cultivar performed better than the Sakata 25 in both experiments. The fertilization with P or K did not influence the growth and the productivity of both radish cultivars. Therefore, both cultivars of radish evaluated do not need to be fertilized with P and K when planted in a Latosol with high levels of these nutrients.


Plants ◽  
2019 ◽  
Vol 8 (8) ◽  
pp. 293 ◽  
Author(s):  
Carmine Amalfitano ◽  
Nadezhda A. Golubkina ◽  
Laura Del Vacchio ◽  
Giuseppe Russo ◽  
Mario Cannoniero ◽  
...  

Research was carried out on onion landrace (Ramata di Montoro) for seed production in southern Italy, with the aim to evaluate the effects on yield and quality of four bulb planting times in factorial combination with four densities, using a split plot design with three replicates. The number of flower stalks per plant, their height and diameter, and the inflorescence diameter decreased with the bulb planting delay and density increase. The highest plant leaf area and LAI (leaf area index), seed yield, number, and mean weight were recorded with the earliest planting time, with the lowest bulb density eliciting the highest plant leaf area but the lowest LAI and seed yield per hectare. The ratio between seeds and inflorescence weight, and seed germinability, decreased with the planting delay and density increase. Seed oil, protein, and antioxidant content (polyphenols and selenium) were highest with the last crop cycle. The polyunsaturated fatty acids, predominant in oil, increased with planting time delay, whereas the monounsaturated fatty acids decreased. Linoleic, oleic, and palmitic acid prevailed among polyunsaturated, monounsaturated, and saturated fatty acids, respectively. Planting from 20 December to 10 January with 3.3 cold-stored bulbs per m2 was the most effective combination in terms of seed yield per hectare, whereas seed oil content and quality were the best, with the last crop cycle starting on 21 February, independent of bulb density.


2016 ◽  
Vol 8 (1) ◽  
pp. 140-143
Author(s):  
J. V. Thaker ◽  
R. P. Kuvad ◽  
V. S. Thaker

Leaf area is an important parameter in physiology and agronomy studies. Linear models for leaf area measurement are developed for plant species as a nondestructive method. The plant Adhatoda vasica L. (a medicinal plant) was selected and the leaves of this plant were used for development of linear model for leaf area using Leaf Area Meter (LAM) software. Planimetric parameters (length, length2, width and width2) and gravimetric (dry weight and water content) parameters are considered for the development of linear model for this plant species. Single factor ANOVA and linear correlations were worked out using these parameters and leaf area. The plant was showed significant relationship with the parameters studied. The best correlation as represented by regression coefficient (R2) was used and improved R2 is worked out. It is observed that with increase in leaf area, water content is also increased and showed best correlation with the leaf area. Thus water content can be taken as a parameter for developing linear model for leaf area is concluded.


EUGENIA ◽  
2011 ◽  
Vol 17 (2) ◽  
Author(s):  
Stella M.T. Tulung ◽  
Sofia Demmassabu

ABSTRACT   The objective of this research is to detect the influence of shade kinds to the  growth and yield of paprika and the suitable kinds of shades for paprika. Varieties Yolo Wonder was applied in this research and the research was located at Kakaskasen III, Kecamatan Tomohon Utara for four months.  The research was carried on through Randomized Group Design by using three types of treatments and six replicates.  The treatments were as follows:  without shade, using transparent plastic shade and  using stubble of paddy shade. Detected variable included: the height of the plant, leaf area, amount of the fruit, length, diametre and the weight of the fruit. The height of the plant measured every week since two weeks after planting  and the leaf area was measured according to the height of the plant. The amount, lenght, diametre and the weight of the fruit measured during the harvest time. The result of the research shows that diffrerent kinds of shades brings different influence to the growth and yield of paprika and the research shows that the suitable shade for the growth and yield of paprika is transparent plastic shade. Keyword: paprika, shade


1997 ◽  
Vol 33 (01) ◽  
pp. 65-72 ◽  
Author(s):  
J. T. Korva ◽  
G. A. Forbes

A technique for leaf area measurement utilizing water spray as an inexpensive substitute for electronic equipment was developed and tested with leaves of potato (Solanum tuberosum L.). The leaf areas measured by the spray method were highly correlated with those measured by an electronic area meter. Measurements of leaf area obtained by the spray method were significantly more highly correlated with those obtained by the area meter than were the measurements of dry weights. The main advantages of the new method are precision, accuracy and immediate results at a low cost.


Sign in / Sign up

Export Citation Format

Share Document