Indirect Polyphosphate Quantification in Activated Sludge

1990 ◽  
Vol 25 (2) ◽  
pp. 161-174 ◽  
Author(s):  
Yves Comeau ◽  
Kenneth J. Hall ◽  
William K. Oldham
Keyword(s):  
Wastewater Treatment ◽  
Activated Sludge ◽  
Inorganic Phosphate ◽  
Wastewater Treatment Plants ◽  
Phosphate Removal ◽  
New Method ◽  
Biological Method ◽  
Anaerobic Conditions

Abstract An indirect biological method is presented to quantify the amount of polyphosphates in activated sludge obtained from wastewater treatment plants removing phosphate biologically. The method is based upon the property of such sludges to degrade polyphosphate reserves under anaerobic conditions as a result of acetate addition thereby releasing inorganic phosphate into solution. The addition of an excess of acetate ensures the consumption of any oxygen and nitrate, and the depletion of intracellular polyphosphates available for acetate storage. Thus, this new method offers a much easier approach than those previously available to quantify polyphosphate, one of the two storage polymers involved in the mechanism of biological phosphate removal.

Identity, abundance and physiology of Aquaspirillum-related filamentous bacteria in activated sludge

2006 ◽  
Vol 54 (1) ◽  
pp. 237-245 ◽  
Author(s):  
T.R. Thomsen ◽  
C. Kragelund ◽  
P.H. Nielsen
Keyword(s):  
Wastewater Treatment ◽  
Activated Sludge ◽  
Nutrient Removal ◽  
Wastewater Treatment Plants ◽  
Oligonucleotide Probe ◽  
Filamentous Bacteria ◽  
Type B ◽  
Anaerobic Conditions ◽  
Almost All

Microcolony-forming bacteria closely related to the genus Aquaspirillum in the Betaproteobacteria were recently observed to be abundant in many nutrient removal wastewater treatment plants. The developed oligonucleotide probe, Aqs997, however, occasionally also targeted some filamentous bacteria in activated sludge samples when fluorescence in situ hybridization was performed. In this study, the identity, abundance, and ecophysiology of these Aqs997-positive filamentous bacteria were studied in detail. Most of the Aqs997-positive filamentous bacteria could morphologically be identified as either Eikelboom Type 1701, Type 0041/0675 or possibly Type 1851, all characterized by epiphytic growth. They were found in almost all 21 wastewater treatment plants investigated. Two morphotypes were found. Type A filaments, which seemed to be the same genotype as the microcolony-forming bacteria targeted by probe Aqs997.Type B filaments also hybridized with probe GNS941, specific for the Chloroflexi phylum, so the true identity remains unclear. Aqs997-positive filaments usually stained Gram-negative, but Gram-positive filaments were also found, stressing the difficulties in identifying bacteria from morphology and simple staining results. Studies on the ecophysiology by microautoradiography showed that Aqs997-positive filamentous bacteria did not consume acetate and glucose, while some took up butyrate, mannose, and certain amino acids. Most likely, some Aqs997-positive filamentous bacteria were able to perform full denitrification such as the Aqs997-positive microcolony-forming bacteria, and some were able to store polyhydroxyalkanoates under anaerobic conditions, potentially being glycogen accumulating organisms.

Foaming in anaerobic digesters caused by Microthrix parvicella

1998 ◽  
Vol 37 (4-5) ◽  
pp. 51-55 ◽  
Author(s):  
Åsa Dillner Westlund ◽  
Eva Hagland ◽  
Maria Rothman
Keyword(s):  
Wastewater Treatment ◽  
Activated Sludge ◽  
Wastewater Treatment Plants ◽  
Anaerobic Digester ◽  
Foam Formation ◽  
Anaerobic Conditions ◽  
Anaerobic Digesters ◽  
Operating Strategy ◽  
Microscopic Studies ◽  
Microthrix Parvicella

Three large wastewater treatment plants in the greater Stockholm area have experienced serious anaerobic digester foaming. Microscopic studies of the sludge from the foam phase showed a network of the filamentous organism Microthrix parvicella. The morphology of the long, coiled filament appeared to be affected by the anaerobic conditions where it became broken up into to shorter and thicker filaments. The operating strategy to prevent foam in the anaerobic digesters at these plants is to control the growth of M. parvicella in the activated sludge tanks by increasing the sludge load. Top installed stirrers and the addition of poly-aluminium salt have also been used to prevent foam formation.

Operational Results of the Wolfsburg Wastewater Treatment Plant

1992 ◽  
Vol 25 (4-5) ◽  
pp. 203-209 ◽  
Author(s):  
R. Kayser ◽  
G. Stobbe ◽  
M. Werner
Keyword(s):  
Wastewater Treatment ◽  
Activated Sludge ◽  
Nitrogen Content ◽  
Total Nitrogen ◽  
Nitrogen Removal ◽  
Wastewater Treatment Plant ◽  
Treatment Plant ◽  
Phosphate Removal ◽  
Total Nitrogen Content ◽  
Activated Sludge Process

At Wolfsburg for a load of 100,000 p.e., the step-feed activated sludge process for nitrogen removal is successfully in operation. Due to the high denitrification potential (BOD:TKN = 5:1) the effluent total nitrogen content can be kept below 10 mg l−1 N; furthermore by some enhanced biological phosphate removal about 80% phosphorus may be removed without any chemicals.

scholarly journals The capacity of wastewater treatment plants drives bacterial community structure and its assembly

2019 ◽  
Vol 9 (1) ◽  
Author(s):  
Young Kyung Kim ◽  
Keunje Yoo ◽  
Min Sung Kim ◽  
Il Han ◽  
Minjoo Lee ◽  
...  
Keyword(s):  
Wastewater Treatment ◽  
Community Structure ◽  
Bacterial Community ◽  
Activated Sludge ◽  
Community Assembly ◽  
Bacterial Communities ◽  
Wastewater Treatment Plants ◽  
High Capacity ◽  
Operating Conditions ◽  
Rrna Gene

Abstract Bacterial communities in wastewater treatment plants (WWTPs) affect plant functionality through their role in the removal of pollutants from wastewater. Bacterial communities vary extensively based on plant operating conditions and influent characteristics. The capacity of WWTPs can also affect the bacterial community via variations in the organic or nutrient composition of the influent. Despite the importance considering capacity, the characteristics that control bacterial community assembly are largely unknown. In this study, we discovered that bacterial communities in WWTPs in Korea and Vietnam, which differ remarkably in capacity, exhibit unique structures and interactions that are governed mainly by the capacity of WWTPs. Bacterial communities were analysed using 16S rRNA gene sequencing and exhibited clear differences between the two regions, with these differences being most pronounced in activated sludge. We found that capacity contributed the most to bacterial interactions and community structure, whereas other factors had less impact. Co-occurrence network analysis showed that microorganisms from high-capacity WWTPs are more interrelated than those from low-capacity WWTPs, which corresponds to the tighter clustering of bacterial communities in Korea. These results will contribute to the understanding of bacterial community assembly in activated sludge processing.

scholarly journals “Candidatus Dechloromonas phosphoritropha” and “Ca. D. phosphorivorans”, novel polyphosphate accumulating organisms abundant in wastewater treatment systems

2021 ◽  
Author(s):  
Francesca Petriglieri ◽  
Caitlin Singleton ◽  
Miriam Peces ◽  
Jette F. Petersen ◽  
Marta Nierychlo ◽  
...  
Keyword(s):  
Wastewater Treatment ◽  
Wastewater Treatment Plants ◽  
Niche Partitioning ◽  
16S Rrna Gene Sequencing ◽  
Abundant Species ◽  
Phosphate Removal ◽  
Rrna Gene ◽  
Biological Phosphorus Removal ◽  
Polyphosphate Accumulating Organisms

AbstractMembers of the genus Dechloromonas are often abundant in enhanced biological phosphorus removal (EBPR) systems and are recognized putative polyphosphate accumulating organisms (PAOs), but their role in phosphate removal is still unclear. Here, we used 16S rRNA gene sequencing and fluorescence in situ hybridization (FISH) to investigate the abundance and distribution of Dechloromonas spp. in Danish and global wastewater treatment plants. The two most abundant species worldwide revealed in situ dynamics of important intracellular storage polymers, measured by FISH-Raman in activated sludge from four full-scale EBPR plants and from a lab-scale reactor fed with different substrates. Moreover, seven distinct Dechloromonas species were determined from a set of ten high-quality metagenome-assembled genomes (MAGs) from Danish EBPR plants, each encoding the potential for polyphosphate (poly-P), glycogen, and polyhydroxyalkanoates (PHA) accumulation. The two species exhibited an in situ phenotype in complete accordance with the metabolic information retrieved by the MAGs, with dynamic levels of poly-P, glycogen, and PHA during feast-famine anaerobic–aerobic cycling, legitimately placing these microorganisms among the important PAOs. They are potentially involved in denitrification showing niche partitioning within the genus and with other important PAOs. As no isolates are available for the two species, we propose the names Candidatus Dechloromonas phosphoritropha and Candidatus Dechloromonas phosphorivorans.

scholarly journals Deep learning-based morphology classification of activated sludge flocs in wastewater treatment plants

2021 ◽  
Author(s):  
Hisashi Satoh ◽  
Yukari Kashimoto ◽  
Naoki Takahashi ◽  
Takashi Tsujimura
Keyword(s):  
Wastewater Treatment ◽  
Deep Learning ◽  
Activated Sludge ◽  
Morphological Change ◽  
Wastewater Treatment Plants ◽  
Filamentous Bacteria ◽  
Sludge Flocs

A deep learning-based two-label classifier 1 recognized a 20% morphological change in the activated flocs. Classifier-2 quantitatively recognized an abundance of filamentous bacteria in activated flocs.

Controlling the Settling of Activated Sludge in Pulp and Paper Wastewater Treatment Plants

1999 ◽  
Vol 40 (11-12) ◽  
pp. 223-229 ◽  
Author(s):  
Frédéric Clauss ◽  
Christel Balavoine ◽  
Delphine Hélaine ◽  
Gaëtan Martin
Keyword(s):  
Wastewater Treatment ◽  
Activated Sludge ◽  
Wastewater Treatment Plants ◽  
Pulp And Paper ◽  
Organic Load ◽  
Forest Industry ◽  
Filamentous Bulking ◽  
Mineral Particles ◽  
Mineral Powder

Forest industry wastewaters are difficult to clean: hydraulic and organic load variations, filamentous bulking or pin-point flocs negatively impact depollution processes. The addition of a fine, mineral, talc-based powder, Aquatal, into the aeration tanks of wastewater treatment plants connected to pulp and paper factories has been successfully tested since end of '97. The first case-study presents full results obtained over a period of 18 months in a 20,000 p.e. plant connected to a paper factory. The mineral powder was regularly added to control sludge volume index, thereby ensuring low suspended solids concentration in the outfluent. Plant operators could easily adapt biomass concentration to match organic load variation, thereby maintaining pollution micro-organisms ratio constant. In a second case study, a trouble-shooting strategy was implemented to counteract filamentous bulking. A one-off, large dosage enabled the plant operator to deal effectively with poor settleability sludge and rapidly control sludge blanket expansion. In both cases, the main common characteristics observed were an increase in floc aggregation and the production of heavier and well-structured flocs. The sludge settling velocity increased and an efficient solid/liquid separation was obtained. After a few days, the mineral particles of Aquatal were progressively integrated into the sludge floc structure. When the mineral powder was added to the activated sludge in the aeration basin, chemical interactions frequently encountered with other wastewater treatment additives did not pose a problem. Moreover, with this mineral additive, the biological excess sludge displayed good thickening properties and dewatering was improved. Despite the addition of the insoluble mineral particles, the amount of wet sludge expelled did not increase. Aquatal offers a rapid solution to floc settleability problems which so frequently arise when physical or biological disorders appear in forest industry wastewater treatment plants.

PARAMETERS FOR DYNAMIC SIMULATION OF W ASTEW ATER TREATMENT PLANTS WITH HIGH-RATE AND LOW-RATE ACTIVATED SLUDGE TANKS

1994 ◽  
Vol 30 (4) ◽  
pp. 211-214 ◽  
Author(s):  
E. Brands ◽  
M. Liebeskind ◽  
M. Dohmann
Keyword(s):  
Wastewater Treatment ◽  
Activated Sludge ◽  
Dynamic Simulation ◽  
Municipal Wastewater ◽  
Wastewater Treatment Plants ◽  
High Rate ◽  
Yield Coefficient ◽  
Municipal Wastewater Treatment ◽  
Municipal Wastewater Treatment Plants ◽  
Low Rate

This study shows a comparison of important parameters for dynamic simulation concerning the highrate and low-rate activated sludge tanks of several municipal wastewater treatment plants. The parameters for the dynamic simulation of the single-stage process are quite well known, but parameters for the high-ratellow-rate activated sludge process are still missi ng, although a considerable number of wastewater treatment plants are designed and operated that way. At present any attempt to simulate their operation is restricted to the second stage due to missing data concerning growth rate, decay rate, yield coefficient and others.

Sign in / Sign up

Export Citation Format

Share Document