Monitoring of hazardous substances at Alcantarilha's water treatment plant, Portugal

2004 ◽  
Vol 4 (5-6) ◽  
pp. 343-353 ◽  
Author(s):  
M.J. Rosa ◽  
T. Cecílio ◽  
M. Ribau Teixeira ◽  
M. Viriato ◽  
R. Coelho ◽  
...  
Keyword(s):  
Water Quality ◽  
Drinking Water ◽  
Water Treatment ◽  
Treatment Plant ◽  
Water Treatment Plant ◽  
Hazardous Substances ◽  
Legal Standards ◽  
Guideline Values ◽  
Microbiological Parameters ◽  
By Products

A monitoring programme of hazardous substances was implemented in Alcantarilha's water treatment plant (Algarve, Portugal) since 2002, in addition to the legally established monitoring of standard physical, chemical and microbiological parameters. The objective of this programme was to ensure the drinking water quality regarding the waterborne disease organisms Cryptosporidium, Giardia, Salmonella, Pseudomonas aeruginosa, enterovirus and cyanobacteria, and the potentially harmful chemicals aluminium, cyanotoxins, and disinfection by-products (THM) and their precursors (TOC, DOC, UV254 nm, SUVA). Most of these parameters are new and still not regulated by the Portuguese and the European legislation. Data presented in this study refer to the period of August 2002 to October 2003. Results show that, despite the seasonal variations of the raw water quality, concentrations of the hazardous substances in the supplied drinking water were far below the legal standards and the WHO's and EPA guideline values, demonstrating the high removal efficiencies of this treatment plant.

scholarly journals Investigation of water quality changes in drinking water supplied from Sitlee water treatment plant on River Tawi to Old Jammu City, Jammu, J&K, India

2018 ◽  
Vol 10 (2) ◽  
pp. 601-607
Author(s):  
Poonam Kundan ◽  
Deepika Slathia
Keyword(s):  
Water Quality ◽  
Drinking Water ◽  
Water Treatment ◽  
Water Samples ◽  
Treatment Plant ◽  
Water Treatment Plant ◽  
Quality Parameters ◽  
Faecal Coliform ◽  
Quality Changes ◽  
Distribution Point

In the present study, an attempt has been made to evaluate the water quality changes in River Tawi water treated at Sitlee water treatment plant, and supplied for drinking to Old Jammu City, Jammu, J&K, India. Water samples from the treated water unit of Sitlee water treatment plant and around ten houses from the distribution point (Old Jammu City) were analyzed monthly for various physicochemical parameters for a period of one year (February 2014 to January 2015). The study indicated deterioration of drinking water quality during its passage through the distribution network which has been attributed to the leakages and defects in the old pipe system supplying water to the Jammu city. Comparison of analyzed water quality parameters with the drinking water standards prescribed by World Health Organization (WHO) and Bureau of Indian Standards (BIS) indicated that parameters like DO (7.49-8.24mg/l), calcium(49.93-67.08mg/l), magnesium(16.14-25.21mg/l) and potassium(6.99-7.93mg/l) were almost nearing the desirable limits but were within the permissible limits and parameters like turbidity(3.5-8.17 NTU) and total hardness(78.87-120.50mg/l) were above the desirable limits in the water samples collected from the distribution point. The collected primary data for the thirteen water quality parameters has been used to calculate the Arithmetic Water Quality Index(WQI) which has shown monsoon increase with higher values at distribution point(65.65). One time microbial analysis (MPN/100ml) for total and faecal coliform has indicated presence of faecal coliform (<1/100ml) in water samples from eight households at distribution point which indicates contamination of water with human faecal matter during its passage through the distribution network. According to microbial standards laid down by Central Pollution Control Board (2008), water contaminated with faecal coliform is unfit for drinking without conventional treatment.

Speciation and seasonal variation of various disinfection by-products in a full-scale drinking water treatment plant in East China

2019 ◽  
Vol 19 (6) ◽  
pp. 1579-1586 ◽  
Author(s):  
Xiang-Ren Zhou ◽  
Yi-Li Lin ◽  
Tian-Yang Zhang ◽  
Bin Xu ◽  
Wen-Hai Chu ◽  
...  
Keyword(s):  
Drinking Water ◽  
Water Treatment ◽  
Treatment Plant ◽  
Drinking Water Treatment ◽  
Water Treatment Plant ◽  
Full Scale ◽  
East China ◽  
Raw Water ◽  
Drinking Water Treatment Plant ◽  
By Products

Abstract The objective of this research was to study the occurrence and seasonal variations of disinfection by-products (DBPs), including traditional carbonaceous and emerging nitrogenous DBPs, in a full-scale drinking water treatment plant (DWTP) for nearly 2 years. The removal efficiencies of each DBP through the treatment processes were also investigated. This DWTP takes raw water from the Yangtze River in East China. The quality of the raw water used in this DWTP varied with different seasons. The results suggested that DBP concentrations of the finished water were higher in spring (82.33 ± 15.12 μg/L) and summer (117.29 ± 9.94 μg/L) with higher dissolved organic carbon (DOC) levels, but lower in autumn (41.10 ± 5.82 μg/L) and winter (78.47 ± 2.74 μg/L) with lower DOC levels. Due to the increase of bromide concentration in spring and winter, more toxic brominated DBPs increased obviously and took up a greater proportion. In this DWTP, DBP concentrations increased dramatically after pre-chlorination, especially in summer. It is noteworthy that the removal of DBPs during the subsequent treatment was more obvious in spring than in the other three seasons because the pH value is more beneficial to coagulation in spring.

scholarly journals Autonomous intake selection optimisation model for a dual source drinking water treatment plant

2017 ◽  
Vol 18 (1) ◽  
pp. 279-287 ◽  
Author(s):  
E. Bertone ◽  
K. O'Halloran ◽  
M. Bartkow ◽  
K. Mann
Keyword(s):  
Water Quality ◽  
Drinking Water ◽  
Water Treatment ◽  
Treatment Plant ◽  
Drinking Water Treatment ◽  
Water Treatment Plant ◽  
Data Driven ◽  
Water Utility ◽  
Drinking Water Treatment Plant ◽  
Optimisation Model

Abstract The Mudgeeraba drinking water treatment plant, in Southeast Queensland, Australia, can withdraw raw water from two different reservoirs: the smaller Little Nerang dam (LND) by gravity, and the larger Advancetown Lake, through the use of pumps. Selecting the optimal intake is based on water quality and operators' experience; however, there is potential to optimise this process. In this study, a comprehensive hybrid (data-driven, chemical, and mathematical) intake optimisation model was developed, which firstly predicts the chemicals dosages, and then the total (chemicals and pumping) costs based on the water quality at different depths of the two reservoirs, thus identifying the cheapest option. A second data-driven, probabilistic model then forecasts the volume of the smaller LND 6 weeks ahead in order to minimise the depletion and spill risks. This is important in case the first model identifies this reservoir as the optimal intake solution, but this could lead in the long term to depletion and full reliance on the electricity-dependent Advancetown Lake. Both models were validated and proved to be accurate, and with the potential for substantial monetary savings for the water utility.

scholarly journals MANAGING AND MODELING OF THE DRINKING WATER TREATMENT PLANT SLUDGE

2017 ◽  
Vol 5 (2) ◽  
pp. 168-179
Author(s):  
M. Farhaoui
Keyword(s):  
Sustainable Development ◽  
Drinking Water ◽  
Water Treatment ◽  
Water Resources ◽  
Treatment Plant ◽  
Drinking Water Treatment ◽  
Water Treatment Plant ◽  
Water Sources ◽  
Water Treatment Process ◽  
By Products

Water management is a key pillar of sustainable development. Indeed, the rational use of water has become a condition for new investments in the water sector as many sectors. Optimizing the production of drinking water is one aspect. This optimization involves not only the choice of water resource use but also the management of by-products of the water treatment process to manage sustainably the exploited water resources. The city of Meknes is watered from two sources and a set of holes (14), the turbidity of water sources can vary depending on rainfall recorded in the region. A water treatment plant (600 l/s) was performed for the purification of water sources. Through this study, we focus on modeling of sludge volume produced by this plant.  The objective is to design a model for calculating the sludge volume from the actual data recorded in the plant. The model ca be used by the operator to predict the sludge volume and can be used also by the designers. The results of this study demonstrated that the volumes calculated from the model constructed considering the data recorded at the station perfectly match the volumes produced with a determination coefficient of 100%. The application of this model can not only provide the operator with an effective tool for managing of the station by-products but also to provide designers with a formula to prevent over/under design of structures. Therefore, these measures help to optimize the cost of production of drinking water and will play an important role in the sustainable development of water resources.

scholarly journals Use of Acorn Leaves as a Natural Coagulant in a Drinking Water Treatment Plant

Water ◽  
2018 ◽  
Vol 11 (1) ◽  
pp. 57 ◽  
Author(s):  
Abderrezzaq Benalia ◽  
Kerroum Derbal ◽  
Antonio Panico ◽  
Francesco Pirozzi
Keyword(s):  
Water Quality ◽  
Drinking Water ◽  
Water Treatment ◽  
Treatment Plant ◽  
Drinking Water Treatment ◽  
Water Treatment Plant ◽  
Distilled Water ◽  
Raw Water ◽  
Turbidity Removal ◽  
Leaf Powder

In this study, the use of acorn leaves as a natural coagulant to reduce raw water turbidity and globally improve drinking water quality was investigated. The raw water was collected from a drinking water treatment plant located in Mila (Algeria) with an initial turbidity of 13.0 ± 0.1 NTU. To obtain acorn leaf powder as a coagulant, the acorn leaves were previously cleaned, washed with tap water, dried, ground and then finely sieved. To improve the coagulant activity and, consequently, the turbidity removal efficiency, the fine powder was also preliminarily treated with different solvents, as follows, in order to extract the coagulant agent: (i) distilled water; (ii) solutions of NaCl (0.25; 0.5 and 1 M); (iii) solutions of NaOH (0.025; 0.05 and 0.1 M); and (iv) solutions of HCl (0.025; 0.05 and 0.1 M). Standard Jar Test assays were conducted to evaluate the performance of the coagulant in the different considered operational conditions. Results of the study indicated that at low turbidity (e.g., 13.0 ± 0.1 NTU), the raw acorn leaf powder and those treated with distilled water (DW) were able to decrease the turbidity to 3.69 ± 0.06 and 1.97 ± 0.03 NTU, respectively. The use of sodium chloride solution (AC-NaCl) at 0.5 M resulted in a high turbidity removal efficiency (91.07%) compared to solutions with different concentrations (0.25 and 1 M). Concerning solutions of sodium hydroxide (AC-NaOH) and hydrogen chloride (AC-HCl), the lowest final turbidities of 1.83 ± 0.13 and 0.92 ± 0.02 NTU were obtained when the concentrations of the solutions were set at 0.05 and 0.1 M, respectively. Finally, in this study, other water quality parameters, such as total alkalinity hardness, pH, electrical conductivity and organic matters content, were measured to assess the coagulant performance on drinking water treatment.

Sign in / Sign up

Export Citation Format

Share Document