BICT biological process for nitrogen and phosphorus removal

2004 ◽  
Vol 50 (6) ◽  
pp. 179-188
Author(s):  
Y. Huang ◽  
Y. Li ◽  
Y. Pan
Keyword(s):  
Phosphorus Removal ◽  
Municipal Wastewater ◽  
Biological Process ◽  
Synthetic Wastewater ◽  
Nitrifying Bacteria ◽  
Biological Nutrient Removal ◽  
Nitrogen And Phosphorus ◽  
Nitrogen And Phosphorus Removal ◽  
Attached Growth ◽  
Removal Process

An updated biological nitrogen and phosphorus removal process - BICT (Bi-Cyclic Two-Phase) biological process - is proposed and investigated. It is aimed to provide a process configuration and operation mode that has facility and good potential for optimizing operation conditions, especially for enhancing the stability and reliability of the biological nutrient removal process. The proposed system consists of an attached-growth reactor for growing autotrophic nitrifying bacteria, a set of suspended-growth sequencing batch reactors for growing heterotrophic organisms, an anaerobic biological selector and a clarifier. In this paper, the fundamental concept and operation principles of BICT process are described, and the overall performances, major operation parameters and the factors influencing COD, nitrogen and phosphorus removal in the process are also discussed based on the results of extensive laboratory experiments. According to the experimental results with municipal sewage and synthetic wastewater, the process has strong and stable capability for COD removal. Under well controlled conditions, the removal rate of TN can reach over 80% and TP over 90% respectively, and the effluent concentrations of TN and TP can be controlled below 15 mg/L and 1.0 mg/L respectively for municipal wastewater. The improved phosphorus removal has been reached at short SRT, and the recycling flow rate of supernatant between the main reactors and attached-growth reactor is one of the key factors controlling the effect of nitrogen removal.

Improvment of nitrogen and phosphorus removal in the anaerobic-oxic-anoxic-OXIC (AOAO) process by stepwise feeding

2000 ◽  
Vol 42 (3-4) ◽  
pp. 89-94 ◽  
Author(s):  
H.Y. Chang ◽  
C.F. Ouyang
Keyword(s):  
Carbon Source ◽  
Phosphorus Removal ◽  
Removal Rate ◽  
Feeding Strategy ◽  
Synthetic Wastewater ◽  
Biological Nutrient Removal ◽  
Nitrogen And Phosphorus ◽  
Nitrogen And Phosphorus Removal ◽  
Kjeldahl Nitrogen ◽  
P Removal

This investigation incorporated a stepwise feeding strategy into the biological process containing anaerobic/oxide/anoxic/oxide (AOAO) stages to enhance nitrogen and phosphorus removal efficiencies. Synthetic wastewater was fed into the experimental reactors during the anaerobic and anoxic stages and the substrates/nutrients were successfully consumed without recycling either nitrified effluent or external carbon source. An intrinsic sufficient carbon source developed during the anoxic stage and caused the NOx (NO2-N+NO3-N) concentration to be reduced from 11.85mg/l to 5.65mg/l. The total Kjeldahl nitrogen (TKN) removal rate was between 81.81%∼93.96% and the PO4-P removal ratio ranged from 93%∼100%. The substrate fed into the anaerobic with a Q1 flow rate and a Q2 into the anoxic reactor. The three difference experiments contained within this study produced Q1/Q2 that varied from 7/3, 8/2, and 9/1. The AOAO process saved nearly one-third of the energy compared with typical biological nutrient removal (BNR) system A2O processes.

Retrofit of biological nutrient removal process assisted by numerical simulation with activated sludge model no. 2

1996 ◽  
Vol 34 (1-2) ◽  
pp. 221-228 ◽  
Author(s):  
Gakuji Kurata ◽  
Kazushi Tsumura ◽  
Syoichiro Nakamura ◽  
Michio Kuwahara ◽  
Akio Sato ◽  
...  
Keyword(s):  
Wastewater Treatment ◽  
Nutrient Removal ◽  
Phosphorus Removal ◽  
Biological Nutrient Removal ◽  
Organic Substrates ◽  
Biological Phosphorus Removal ◽  
Nitrogen And Phosphorus ◽  
Nitrogen And Phosphorus Removal ◽  
Removal Process ◽  
Biological Phosphorus

In existing wastewater treatment plants that employ biological nitrogen and phosphorus removal processes, a low concentration of organic substrates in the influent wastewater has a destabilizing effect on the phosphorus removal process. Many efforts have been made to combat this problem, including reconstructing the process flow and improving operation and control systems. However, because the mechanism used for biological phosphorus removal is complex, it is difficult to establish effective empirical methods. For this paper, we constructed a simulator for the wastewater treatment process and tried to improve on current procedures, focusing on the planning, execution, and evaluation of methods of retrofitting existing WWTP with equipment for biological nutrient removal. The Shinnanyo WWTP uses the anaerobic/aerobic activated sludge process to remove nitrogen and phosphorus biologically. At this plant, however, the influent wastwwater has an insufficient concentration of organic substrates, thus decreasing the efficiency of the biological phosphorus removal. An analysis of organic consumption in the reaction tank on the simulation suggested that injecting primary sludge into the reaction tank would increase the efficiency of phosphorus removal process. Full scale experiments conducted at the plant verified the efficiency of this method. In addition, by shortening the A-SRT, ensuring that nitrification is not negatively affected, the efficiency of the nitrogen and phosphorus removal was significantly improved.

Application of reversed A2/O process on removing nitrogen and phosphorus from municipal wastewater in China

2011 ◽  
Vol 63 (10) ◽  
pp. 2138-2142 ◽  
Author(s):  
X. S. Kang ◽  
C. Q. Liu ◽  
B. Zhang ◽  
X. J. Bi ◽  
F. Zhang ◽  
...  
Keyword(s):  
Wastewater Treatment ◽  
Wastewater Treatment Plant ◽  
Phosphorus Removal ◽  
Municipal Wastewater ◽  
Treatment Plant ◽  
Practical Application ◽  
Nitrogen And Phosphorus ◽  
Nitrogen And Phosphorus Removal ◽  
New Process ◽  
Technical Features

The application of reversed A2/O process in practice in China is mainly discussed in this paper. As a new process on nitrogen and phosphorus removal, principle and technical features of reversed A2/O process are also summarized. The application in rebuilt wastewater treatment plant shows that reversed A2/O process not only has merits on high nitrogen and phosphorus removal efficiency, but also has merits on energy saving. The application in newly-build wastewater treatment plant shows that infrastructure and equipment investment of reversed A2/O process economized 15% and 10% respectively, compared to conventional A2/O process. The practical application shows that reversed A2/O process is a new nitrogen and phosphorus removal process, which is suitable for China's national conditions.

Carbon, nitrogen, and phosphorus removal, and lipid production by three saline microalgae grown in synthetic wastewater irradiated with different photon fluxes

2018 ◽  
Vol 34 ◽  
pp. 97-103 ◽  
Author(s):  
Manuel Sacristán de Alva ◽  
Víctor Manuel Luna Pabello ◽  
María Teresa Orta Ledesma ◽  
Modesto Javier Cruz Gómez
Keyword(s):  
Phosphorus Removal ◽  
Lipid Production ◽  
Synthetic Wastewater ◽  
Nitrogen And Phosphorus ◽  
Nitrogen And Phosphorus Removal

Biological nitrogen and phosphorus removal in UCT-type MBR process

2009 ◽  
Vol 59 (11) ◽  
pp. 2093-2099 ◽  
Author(s):  
H. Lee ◽  
J. Han ◽  
Z. Yun
Keyword(s):  
Phosphorus Removal ◽  
P Uptake ◽  
Biological Nutrient Removal ◽  
Anoxic Zone ◽  
Nitrogen And Phosphorus ◽  
Nitrogen And Phosphorus Removal ◽  
Nitrate Inhibition ◽  
Biological Nitrogen ◽  
P Removal ◽  
Production Characteristics

A lab-scale UCT-type membrane bio-reactor (MBR) was operated for biological nitrogen (N) and phosphorus (P) removal simultaneously. In order to examine biological nutrient removal (BNR) characteristics of MBR, the lab unit was fed with a synthetic strong and weak wastewater. With strong wastewater, a simultaneous removal of N and P was achieved while application of weak wastewater resulted in a decrease of both N and P removal. Recycled nitrate due to the limited organic in weak wastewater operation probably caused a nitrate inhibition in anaerobic zone. In step feed modification with weak wastewater, both N and P removal capability recovered in the system, indicating that the allocation of COD for denitrification at anoxic zone was a key to increase the biological P removal. In addition, the analysis on the specific P uptake rate in anoxic zone demonstrated that denitrifying phosphorus accumulating organism (dPAO) played an important role to remove up to 40% of P along with N. The sludge production characteristics of UCT-type MBR were similar to ordinary activated sludge with BNR capability.

Changes of pH in A2O Process System and its Impact on Nitrogen and Phosphorus Removal

2012 ◽  
Vol 588-589 ◽  
pp. 55-58
Author(s):  
Yong Feng Li ◽  
Jian Yu Yang ◽  
Guo Cai Zhang
Keyword(s):  
Phosphorus Removal ◽  
Ph Value ◽  
Removal Rate ◽  
Phosphorus Release ◽  
Ammonia Nitrogen ◽  
Biological Nutrient Removal ◽  
Nitrogen And Phosphorus ◽  
Nitrogen And Phosphorus Removal ◽  
Process System ◽  
High Level

Simulate sewage were used in an anaerobic-anoxic-aerobic biological nutrient removal system(A2O process), by observing the pHs in different compartments and its reflected changes in nitrogen and phosphorus removal, studied on the effects of different pHs on the removal of pollutants. The experiments indicates that the anaerobic phosphorus release showed the main performance of the decline of pH, denitrification in anoxic zone caused the rise of pH, uptake of phosphate in the aerobic zone mainly caused the continuous rise of pH. There is no evidently changes in COD removal, ammonia nitrogen get the highest removal as the pH value was between 8.0-8.5, when pH was at 6.5-7.5, the TN have the maximum removal rate, TP can keep in a high level when the pH was above 6.0.

Comparison of nutrient removal efficiency between pre- and post-denitrification wastewater treatments

2006 ◽  
Vol 53 (9) ◽  
pp. 169-175 ◽  
Author(s):  
K. Hamada ◽  
T. Kuba ◽  
V. Torrico ◽  
M. Okazaki ◽  
T. Kusuda
Keyword(s):  
Nutrient Removal ◽  
Phosphorus Removal ◽  
Biological Nutrient Removal ◽  
Biological Phosphorus Removal ◽  
Nitrogen And Phosphorus ◽  
Nitrogen And Phosphorus Removal ◽  
Nutrient Removal Efficiency ◽  
Polyphosphate Accumulating Organisms ◽  
Biological Phosphorus ◽  
Denitrification Process

A shortage of organic substances (COD) may cause problems for biological nutrient removal, that is, lower influent COD concentration leads to lower nutrient removal rates. Biological phosphorus removal and denitrification are reactions in which COD is indispensable. As for biological simultaneous nitrogen and phosphorus removal systems, a competition problem of COD utilisation between polyphosphate accumulating organisms (PAOs) and non-polyphosphate-accumulating denitrifiers is not avoided. From the viewpoint of effective utilisation of limited influent COD, denitrifying phosphorus-removing organisms (DN-PAOs) can be effective. In this study, DN-PAOs activities in modified UCT (pre-denitrification process) and DEPHANOX (post-denitrification ptocess) wastewater treatments were compared. In conclusion, the post-denitrification systems can use influent COD more effectively and have higher nutrient removal efficiencies than the conventional pre-denitrification systems.

Sign in / Sign up

Export Citation Format

Share Document