Dynamics of nitrogen oxides emission from a full-scale sludge liquor treatment plant with nitritation

2011 ◽  
Vol 63 (12) ◽  
pp. 2838-2845 ◽  
Author(s):  
D. J. I. Gustavsson ◽  
J. la Cour Jansen
Keyword(s):  
Wastewater Treatment ◽  
Nitrogen Oxides ◽  
Wastewater Treatment Plants ◽  
Treatment Plant ◽  
Ammonium Nitrogen ◽  
Full Scale ◽  
Normal Operation ◽  
N2o Emissions ◽  
Ammonium Oxidation ◽  
Intergovernmental Panel

Biological treatment in wastewater treatment plants (WWTPs) is a source of nitrogen oxides (N2O, NO and NO2) emitted to the atmosphere. Aerobic ammonia-oxidising bacteria (AOB) have been suggested to be the main source of these emissions. In a full-scale sludge liquor treatment plant at Sjölunda WWTP, it was shown that significant emissions of N2O, NO and NO2 do occur. The plant is operated with nitritation alone, which gives an environment enriched in aerobic AOB. During normal operation, emissions of N2O, NO and NO2 were found to be 3.8%, 0.06% and 0.01% of the ammonium nitrogen load. The N2O emissions were larger than the recommended estimated figure of the Intergovernmental Panel on Climate Change (IPCC) for a complete wastewater treatment plant. The N2O emissions correlated positively with the length of the previous anoxic period, i.e., settling and decantation, and with the ammonium oxidation rate. The NO and NO2 emission profiles were similar and dependent on ammonium oxidation and DO level, but the NO2 concentrations were always lower.

scholarly journals Antibiotic Resistance Genes Dynamics at the Different Stages of the Biological Process in a Full-Scale Wastewater Treatment Plant

Proceedings ◽  
2018 ◽  
Vol 2 (11) ◽  
pp. 650 ◽  
Author(s):  
Ioanna Zerva ◽  
Ioanna Alexandropoulou ◽  
Maria Panopoulou ◽  
Paraschos Melidis ◽  
Spyridon Ntougias
Keyword(s):  
Antibiotic Resistance ◽  
Wastewater Treatment ◽  
Resistance Genes ◽  
Wastewater Treatment Plant ◽  
Biological Process ◽  
Wastewater Treatment Plants ◽  
Treatment Plant ◽  
Antibiotic Resistance Genes ◽  
Additional Treatment ◽  
Full Scale

Wastewater treatment plants (WWTPs) highly contribute to the transmission of antibiotic resistance genes (ARGs) in the environment. In this work, the diversity of ermF, ermB, sul1 and int1-enconding genes was examined in the influent, the mixed liquor and the effluent of a full-scale WWTP. Based on the clones analyzed, similar genotypes were recorded at all process stages. However, distinct genotypes of int1 were responsible for the expression of sul1 and ermF genes in Gammaproteobacteria and Bacteroidetes, respectively. Due to the detection of similar ARGs profiles throughout the biological process, it is concluded that additional treatment is needed for their retention.

Mathematical Modeling of Nitrous Oxide (N2O) Emissions from Full-Scale Wastewater Treatment Plants

2013 ◽  
Vol 47 (14) ◽  
pp. 7795-7803 ◽  
Author(s):  
Bing-Jie Ni ◽  
Liu Ye ◽  
Yingyu Law ◽  
Craig Byers ◽  
Zhiguo Yuan
Keyword(s):  
Mathematical Modeling ◽  
Nitrous Oxide ◽  
Wastewater Treatment ◽  
Wastewater Treatment Plants ◽  
Full Scale ◽  
N2o Emissions

scholarly journals Evaluation of the Nitrous Oxide Emission Reduction Potential of an Aerobic Bioreactor Packed with Carbon Fibres for Swine Wastewater Treatment

Energies ◽  
2019 ◽  
Vol 12 (6) ◽  
pp. 1013 ◽  
Author(s):  
Takahiro Yamashita ◽  
Makoto Shiraishi ◽  
Hiroshi Yokoyama ◽  
Akifumi Ogino ◽  
Ryoko Yamamoto-Ikemoto ◽  
...  
Keyword(s):  
Nitrous Oxide ◽  
Wastewater Treatment ◽  
Wastewater Treatment Plant ◽  
Wastewater Treatment Plants ◽  
Treatment Plant ◽  
Treatment Method ◽  
N2o Emission ◽  
Swine Wastewater ◽  
N2o Emissions ◽  
Carbon Fibres

Nitrous oxide (N2O) is a potent greenhouse gas that is emitted from wastewater treatment plants. To reduce emissions of N2O from swine wastewater treatment plants, we constructed an experimental aerobic bioreactor packed with carbon fibres (ca. 1 m3 bioreactor) as an alternative to conventional activated sludge treatment. The N2O emission factor for the aerobic bioreactor packed with carbon fibres (CF) was 0.002 g N2O-N/g TN-load and the value for the typical activated sludge (AS) reactor was 0.013 g N2O-N/g TN-load. The CF treatment method achieved more than 80% reduction of N2O emissions, compared with the AS treatment method. The experimental introduction of a CF carrier into an actual wastewater treatment plant also resulted in a large reduction in N2O generation. Specifically, the N2O emission factors decreased from 0.040 to 0.005 g N2O-N/g TN-load following application of the carrier. This shows that it is possible to reduce N2O generation by more than 80% by using a CF carrier during the operation of an actual wastewater treatment plant. Some bacteria from the phylum Chloroflexi, which are capable of reducing N2O emissions, were detected at a higher frequency in the biofilm on the CF carrier than in the biofilm formed on the AS reactor.

Full-scale phosphorus recovery from digested waste water sludge in Belgium – part I: technical achievements and challenges

2015 ◽  
Vol 71 (4) ◽  
pp. 487-494 ◽  
Author(s):  
A. Marchi ◽  
S. Geerts ◽  
M. Weemaes ◽  
S. Wim ◽  
V. Christine
Keyword(s):  
Wastewater Treatment ◽  
Wastewater Treatment Plants ◽  
Treatment Plant ◽  
Recovery Process ◽  
Full Scale ◽  
Phosphorus Recovery ◽  
Water Line ◽  
Recovery Potential ◽  
Reference Situation ◽  
Solids Content

To date, phosphorus recovery as struvite in wastewater treatment plants has been mainly implemented on water phases resulting from dewatering processes of the sludge line. However, it is possible to recover struvite directly from sludge phases. Besides minimising the return loads of phosphorus from the sludge line to the water line, placing such a process within the sludge line is claimed to offer advantages such as a higher recovery potential, enhanced dewaterability of the treated sludge, and reduced speed of scaling in pipes and dewatering devices. In the wastewater treatment plant at Leuven (Belgium), a full-scale struvite recovery process from digested sludge has been tested for 1 year. Several monitoring campaigns and experiments provided indications of the efficiency of the process for recovery. The load of phosphorus from the sludge line returning to the water line as centrate accounted for 15% of the P-load of the plant in the reference situation. Data indicated that the process divides this phosphorus load by two. An improved dewaterability of 1.5% of dry solids content was achieved, provided a proper tuning of the installation. Quality analyses showed that the formed struvite was quite pure.

scholarly journals Prediction of Wastewater Quality at a Wastewater Treatment Plant Inlet Using a System Based on Machine Learning Methods

Processes ◽  
2022 ◽  
Vol 10 (1) ◽  
pp. 85
Author(s):  
Barbara Wodecka ◽  
Jakub Drewnowski ◽  
Anita Białek ◽  
Ewa Łazuka ◽  
Joanna Szulżyk-Cieplak
Keyword(s):  
Wastewater Treatment ◽  
Wastewater Treatment Plant ◽  
Wastewater Treatment Plants ◽  
Treatment Plant ◽  
Oxygen Demand ◽  
Ammonium Nitrogen ◽  
Support Vector ◽  
Process Conditions ◽  
Wastewater Quality

One of the important factors determining the biochemical processes in bioreactors is the quality of the wastewater inflow to the wastewater treatment plant (WWTP). Information on the quality of wastewater, sufficiently in advance, makes it possible to properly select bioreactor settings to obtain optimal process conditions. This paper presents the use of classification models to predict the variability of wastewater quality at the inflow to wastewater treatment plants, the values of which depend only on the amount of inflowing wastewater. The methodology of an expert system to predict selected indicators of wastewater quality at the inflow to the treatment plant (biochemical oxygen demand, chemical oxygen demand, total suspended solids, and ammonium nitrogen) on the example of a selected WWTP—Sitkówka Nowiny, was presented. In the considered system concept, a division of the values of measured wastewater quality indices into lower (reduced values of indicators in relation to average), average (typical and most common values), and upper (increased values) were adopted. On the basis of the calculations performed, it was found that the values of the selected wastewater quality indicators can be identified with sufficient accuracy by means of the determined statistical models based on the support vector machines and boosted trees methods.

Molecular biological methods (DGGE) as a tool to investigate nitrification inhibition in wastewater treatment

2003 ◽  
Vol 47 (11) ◽  
pp. 165-172 ◽  
Author(s):  
N. Kreuzinger ◽  
A. Farnleitner ◽  
G. Wandl ◽  
R. Hornek ◽  
R. Mach
Keyword(s):  
Wastewater Treatment ◽  
Activated Sludge ◽  
Municipal Wastewater ◽  
Denaturing Gradient Gel Electrophoresis ◽  
Wastewater Treatment Plants ◽  
Treatment Plant ◽  
Full Scale ◽  
Two Stage ◽  
Plant Laboratory ◽  
Biological Methods

Incomplete nitrification at an activated sludge plant for biological pre-treatment of rendering plant effluents led to a detailed investigation on the origin and solution of this problem. Preliminary studies revealed that an inhibition of ammonia oxidising microorganisms (AOM) by process waters of the rendering plant was responsible for the situation. We were able to show a correlation between the existence of specific AOM and nitrification capacity expressed as oxygen uptake rate for maximal nitrification (OURNmax). Only Nitrosospira sp. was found in the activated sludge of the rendering plant and another industrial wastewater treatment plant with problems in nitrification, while reference plants without nitrification problems showed Nitrosomonas spp. as the predominant ammonia oxidising bacteria. By accompanying engineering investigations and experiments (cross-feeding experiments, operation of a two-stage laboratory plant) with molecular biological methods (DGGE - Denaturing Gradient Gel Electrophoresis) we were able to elaborate an applicable solution for the rendering plant. Laboratory experiments with a two-stage process layout finally provided complete nitrification overcoming the inhibiting nature of process waters from the rendering plant. DGGE analysis of the second stage activated sludge from the laboratory plant showed a shift in population structure from Nitrosospira sp. towards Nitrosomonas spp. simultaneous to the increase of nitrification capacity. Nitrification capacities comparable to full-scale municipal wastewater treatment plants could be maintained for more than two months. As the design of wastewater treatment plants for nitrification is linked to the growth characteristics of Nitrosomonas spp., established criteria can be applied for the redesign of the full-scale plant.

Boosting nitrification with the BABE technology

2005 ◽  
Vol 52 (4) ◽  
pp. 63-70 ◽  
Author(s):  
D.H.J.G. Berends ◽  
S. Salem ◽  
H.F. van der Roest ◽  
M.C.M. van Loosdrecht
Keyword(s):  
Wastewater Treatment ◽  
Wastewater Treatment Plants ◽  
Low Cost ◽  
Treatment Plant ◽  
Full Scale ◽  
Nitrifying Bacteria ◽  
Stable Operation ◽  
Main Process ◽  
Model Studies ◽  
Full Scale Tests

Over the past years there has been a growing interest for compact, simple, low cost and robust technologies to upgrade wastewater treatment plants for nitrogen removal. The BABE (Bio Augmentation Batch Enhanced) technology is such a new concept. This patented system for biological treatment of sludge liquor – the effluent produced from digested sludge – uses a new principle, boosting the nitrifying bacteria in a side stream in such a way that the activated sludge in the main process is augmented. This augmentation increases the nitrification capacity of the wastewater treatment plant (wwtp). Experiments on a practical scale have demonstrated the effective and stable operation of the BABE technology. Model studies supported by the results of the full-scale tests showed that the technology can be applied in several situations, i.e. 1) introducing nitrification at high loaded wwtps; 2) enhancing nitrification at wwtps with incomplete nitrification; 3) enlarging denitrification at wwtps with complete nitrification. Most likely this year a full-scale application will be realized in the Netherlands at a wwtp with insufficient nitrification throughout the year.

Increased nitrogen removal in existing volumes at Sundet wastewater treatment plant, Växjö

2014 ◽  
Vol 9 (2) ◽  
pp. 215-224 ◽  
Author(s):  
Anneli Andersson Chan ◽  
Niklas Johansson ◽  
Magnus Christensson
Keyword(s):  
Wastewater Treatment ◽  
Activated Sludge ◽  
Nitrogen Removal ◽  
Wastewater Treatment Plant ◽  
Treatment Plant ◽  
Full Scale ◽  
Biofilm Reactor ◽  
Main Stream ◽  
Ammonium Oxidation ◽  
N Removal

Many wastewater treatment plants need to improve their nitrogen removal due to stricter requirements and increasing loads. This often means larger bioreactor volumes, which can be very expensive and is sometimes impossible if space is limited. Therefore, there is a need for compact hybrid solutions that can increase capacity within existing volumes. Two full-scale demonstration projects using moving bed biofilm reactor (MBBR) technology has proven to be an efficient way to treat nitrogen in existing volumes at Sundet wastewater treatment plant in Växjö. Increased nitrification and denitrification capacity in parts of the main stream were demonstrated through the Hybas™ process, a combination of MBBR and activated sludge using the integrated fixed-film activated sludge technology. The ANITA™ Mox process, using autotrophic N-removal through anaerobic ammonium oxidation (anammox), provided high nitrogen removal for the sludge liquor. Data collected on-site for over a year are analyzed and compared with the performance of conventional treatment systems. These two full-scale demonstration projects have been a successful learning experience in identifying and correcting both process and operational issues, which may not have arisen at pilot scale. The set objectives in terms of nitrogen removal were met for both processes and design modifications have been identified that will improve future operation at Sundet WWTP.

Performance and operating experiences of the first Scandinavian full-scale Discfilter installation for tertiary phosphorus polishing with preceding coagulation and flocculation

2016 ◽  
Vol 11 (2) ◽  
pp. 459-468 ◽  
Author(s):  
P. Kängsepp ◽  
J. Väänänen ◽  
K. Örning ◽  
M. Sjölin ◽  
P. Olsson ◽  
...  
Keyword(s):  
Wastewater Treatment ◽  
Energy Demand ◽  
Suspended Solids ◽  
Wastewater Treatment Plants ◽  
Treatment Plant ◽  
Full Scale ◽  
First Year ◽  
Pilot Studies ◽  
Coagulation And Flocculation ◽  
Pre Treatment

Microscreening (using Discfilters) is a widely used technology for suspended solids removal in tertiary effluent streams of wastewater treatment plants. Several pilot studies have shown the feasibility of using coagulation and flocculation in combination with microscreens for advanced phosphorus removal, but the number of full-scale references is still limited. In summer 2014, the first Scandinavian full-scale Discfilter installation with 2-stage chemical pre-treatment (coagulation and flocculation) was started up at the Arvidstorp wastewater treatment plant in Trollhättan (Sweden). The results obtained during the first year of operation proved that low suspended solids and total phosphorus effluent values could be achieved (<5 and <0.2 mg/l, respectively). These results were obtained even during heavy rainfall, when biologically and primary treated water were mixed at the influent of the Discfilter installation, before the coagulation and flocculation tanks. Further analysis of the results showed that Discfilter in combination with coagulant and polymer pre-treatment is a robust and reliable technology with low energy demand (34 Wh/m3) and a high recovery (1.9 ± 0.4% of influent flow discharged as reject).

scholarly journals Investigation of Activated Sludge Process

2017 ◽  
Vol 9 (4) ◽  
pp. 413-418
Author(s):  
Aušra Mažeikienė ◽  
Julita Starenko
Keyword(s):  
Wastewater Treatment ◽  
Activated Sludge ◽  
Wastewater Treatment Plant ◽  
Wastewater Treatment Plants ◽  
Treatment Plant ◽  
Biological Indicators ◽  
Ammonium Nitrogen ◽  
Sources Of Pollution ◽  
Treated Sewage ◽  
Nitrification Process

It is important to control not only the large wastewater treatment plants work, but also the work of individual small wastewater treatment plants for the protection of environment. Individual small wastewater treatment plants can become the local sources of pollution, when they are not functioning properly. Sewage purification indicators are not always the same as declared at wastewater treatment plants documentation in real conditions, so it is important to control the properly work of individual small wastewater treatment plants. The work of the small wastewater treatment plant AT-6 was analyzed by the treated sewage results (BDS7, SM, NH4-N, NO3-N, NO2-N, PO4-P), the quality of activated sludge, biological indicators and enzymatic activity in this article. The nitrification process was not going very well by the results of research, because there was the 72 mg/l concentration of ammonium nitrogen remaining in the cleaned wastewater. The morphological study of the activated sludge has confirmed the hypothesis that the necessary conditions for nitrification process were not established. The oxygen supply was increased and the small wastewater treatment plant functioning become more efficient, because nitrification process started working properly – there was less than 1 mg/l of ammonium nitrogen remaining in the cleaned wastewater.

Sign in / Sign up

Export Citation Format

Share Document