Poly(acrylic acid) modifying bentonite with in-situ polymerization for removing lead ions

2012 ◽  
Vol 65 (8) ◽  
pp. 1383-1391 ◽  
Author(s):  
Y. F. He ◽  
L. Zhang ◽  
D. Z. Yan ◽  
S. L. Liu ◽  
H. Wang ◽  
...  
Keyword(s):  
Experimental Data ◽  
Acrylic Acid ◽  
Metal Ions ◽  
In Situ Polymerization ◽  
Second Order ◽  
Order Kinetic ◽  
Freundlich Isotherms ◽  
Pseudo Second Order ◽  
Poly Acrylic Acid

In this paper, a new kind of poly(acrylic acid) modified clay adsorbent, the poly(acrylic acid)/bentonite composite (PAA/HB) was prepared by in-situ polymerization, and utilized to remove lead(II) ions from solutions. The maximum adsorption of adsorbent is at pH 5 for metal ions, whereas the adsorption starts at pH 2. The effects of contact time (5–60 min), initial concentration of metal ions (200–1,000 mg/L) and adsorbent dosage (0.04–0.12 g/100 mL) have been reported in this article. The experimental data were investigated by means of kinetic and equilibrium adsorption isotherms. The kinetic data were analyzed by the pseudo-first-order and pseudo-second-order equation. The experimental data fitted the pseudo-second-order kinetic model very well. Langmuir and Freundlich isotherms were tried for the system to better understand the adsorption isotherm process. The maximal adsorption capacity of the lead(II) ions on the PAA/HB, as calculated from the Langmuir model, was 769.2 mg/g. The results in this study indicated that PAA/HB was an attractive candidate for removing lead(II) (99%).

The sorption of lead, cadmium, copper and zinc ions from aqueous solutions on a raw diatomite from Algeria

2012 ◽  
Vol 65 (10) ◽  
pp. 1729-1737 ◽  
Author(s):  
Messaouda Safa ◽  
Mohammed Larouci ◽  
Boumediene Meddah ◽  
Pierre Valemens
Keyword(s):  
Metal Ions ◽  
Low Cost ◽  
Kinetic Equations ◽  
Sorption Process ◽  
Second Order ◽  
Order Kinetic ◽  
Reaction Conditions ◽  
Freundlich Isotherms ◽  
Pseudo Second Order ◽  
Sorption Parameters

The adsorption of Cu2+, Zn2+, Cd2+ and Pb2+ ions from aqueous solution by Algerian raw diatomite was studied. The influences of different sorption parameters such as contact pH solution, contact time and initial metal ions concentration were studied to optimize the reaction conditions. The metals ions adsorption was strictly pH dependent. The maximum adsorption capacities towards Cu2+, Zn2+, Cd2+ and Pb2+ were 0.319, 0.311, 0.18 and 0.096 mmol g−1, respectively. The kinetic data were modelled using the pseudo-first-order and pseudo-second-order kinetic equations. Among the kinetic models studied, the pseudo-second-order equation was the best applicable model to describe the sorption process. Equilibrium isotherm data were analysed using the Langmuir and the Freundlich isotherms; the results showed that the adsorption equilibrium was well described by both model isotherms. The negative value of free energy change ΔG indicates feasible and spontaneous adsorption of four metal ions on raw diatomite. According to these results, the high exchange capacities of different metal ions at high and low concentration levels, and given the low cost of the investigated adsorbent in this work, Algerian diatomite was considered to be an excellent adsorbent.

scholarly journals Yam Peels as Adsorbent for the Removal of Copper (Cu) and Manganese (Mn) in Waste Water

2017 ◽  
Vol 1 (2) ◽  
pp. 230-243 ◽  
Author(s):  
E. S. Isagba ◽  
S. Kadiri ◽  
I. R. Ilaboya
Keyword(s):  
Waste Water ◽  
Experimental Data ◽  
Metal Ions ◽  
Kinetic Models ◽  
Contact Time ◽  
Metal Ion ◽  
Second Order ◽  
Ion Concentration ◽  
Order Kinetic ◽  
Pseudo Second Order

This paper investigated the use of yam peel as a natural adsorbent for the removal of Copper (Cu) and Manganese (Mn) from waste water. The yam peels were thoroughly washed with distilled water, dried, pulverized and carbonized. The carbonized yam peel was then characterized for its particle sizes, moisture content, ash content, volatile matter, Methylene Blue number, Iodine number. The raw yam peels were prepared using the same procedure, but was not carbonized. The adsorption of Mn(II) and Cu(II) ions were investigated using adsorption experiment at room temperature. The effect of contact time, metal ion concentration and dosage were evaluated. The residual concentrations of the metal ions were determined by Atomic Absorption Spectrophotometer (AAS). Experimental data obtained were analyzed using Kinetic models and Isotherms such as Pseudo- First order kinetic models, Pseudo-second order kinetic models, Langmuir isotherms and Freundlich isotherm. The analysis showed that the pseudo-second order kinetic model best described the adsorption of the metal ions; ( Cu; r2 = 0.991 for RYP and r2 = 0.834 for AYP) and (Mn; r2 = 0.958 for RYP and r2 = 0.896 for AYP) and the experimental data best fit the Freundlich model; (Cu; r2 = 0.564 for RYP and r2 = 0.871 for AYP) and (Mn; r2 = 0.685 for RYP and r2 = 0.736 for AYP). Finally, optimum removal efficiencies of 30.54% for Mn(II) and 39.62% for Cu(II) were obtained for AYP at concentrations of 50mg/l and mass dosage of 1.0g, 120 minutes contact time and a pH of 6.8.

scholarly journals Selective Cu(II) Adsorption from Aqueous Solutions Including Cu(II), Co(II), and Ni(II) by Modified Acrylic Acid Grafted PET Film

2013 ◽  
Vol 2013 ◽  
pp. 1-9 ◽  
Author(s):  
Nazia Rahman ◽  
Nobuhiro Sato ◽  
Satoru Yoshioka ◽  
Masaaki Sugiyama ◽  
Hirotaka Okabe ◽  
...  
Keyword(s):  
Experimental Data ◽  
Aqueous Solution ◽  
Acrylic Acid ◽  
Metal Ions ◽  
Functional Groups ◽  
Metal Ion ◽  
Second Order ◽  
Isotherm Models ◽  
Adsorption Data ◽  
Pseudo Second Order

Acrylic acid (AAc) grafted polyethylene terephthalate (PET) films were prepared by γ irradiation. The graft films showed little metal ion adsorption due to compact structure of the graft chains as shown by the scanning electron microscopy (SEM) images which restricted the access of metal ions to the functional groups. Therefore, the graft films were modified with KOH treatment for expansion of the graft chains to facilitate the access of metal ions to the functional groups. The modified films were used to study the selective Cu2+ adsorption from aqueous solution containing Cu2+, Co2+, and Ni2+. Langmuir and Freundlich isotherm models were used for interpretation of selective equilibrium adsorption data and Langmuir model showed better fitting with experimental data. Again pseudo-first-order and pseudo-second-order equations were used for interpretation of selective kinetic adsorption data and pseudo-second-order equation showed better prediction of experimental data. The adsorbent film showed high selectivity towards Cu2+ in presence of Cu2+, Co2+, and Ni2+ in the pH range of 1.5 to 4.5. Desorption and reuse of the adsorbent film were also studied which indicated that the film can be used repeatedly for selective Cu2+ sorption from aqueous solution.

scholarly journals Removal of Malachite Green from Aqueous Solution by Activated Carbon Developed from Cocoa (Theobroma Cacao) Shell - A Kinetic and Equilibrium Studies

2011 ◽  
Vol 8 (s1) ◽  
pp. S363-S371 ◽  
Author(s):  
C. Theivarasu ◽  
S. Mylsamy
Keyword(s):  
Experimental Data ◽  
Activated Carbon ◽  
Malachite Green ◽  
Kinetic Models ◽  
Theobroma Cacao ◽  
Second Order ◽  
Order Kinetic ◽  
Equilibrium Studies ◽  
Initial Ph ◽  
Pseudo Second Order

The removal of malachite green (MG) by cocoa (Theobroma cacao) shell activated carbon (CSAC) was investigated in present study. Adsorption studies were performed by batch experiments as a function of process parameters such as initial pH, contact time, initial concentration and adsorbent dose. A comparison of kinetic models applied to the adsorption of MG on CSAC was evaluated for the pseudo-first order and pseudo-second order kinetic models. Results showed that the pseudo-second order kinetic model was found to correlate the experimental data well. The experimental equilibrium adsorption data was represented with Langmuir, Freundlich, Tempkin, Dubinin-Radushkevich and Flory-Huggins isotherms. The experimental data obtained in the present study indicated that activated carbon developed from cocoa shell can be attractive options for dye removal from waste water.

scholarly journals Prediction of adsorption efficiency for the removal malachite green and acid blue 161 dyes by marble sludge dust using ANN

2014 ◽  
Vol 16 (4) ◽  
pp. 676-689 ◽  
Keyword(s):  
Experimental Data ◽  
Malachite Green ◽  
Second Order ◽  
Isotherm Models ◽  
Batch Adsorption ◽  
Order Kinetic ◽  
Ann Model ◽  
Marble Dust ◽  
Pseudo Second Order ◽  
Acid Blue

<div> <p>In the present study, batch adsorption studies were performed for the removal of malachite green and acid blue 161 dyes from aqueous solutions by varying parameters such as contact time, waste marble dust amount, initial dye concentration and temperature. The equilibrium adsorption data were analyzed by Langmuir, Freundlich and Temkin adsorption isotherm models. The Langmuir and Freundlich adsorption models agree well with experimental data. The pseudo-second order, intraparticle intraparticle diffusion and Elovich kinetic models were applied to the experimental data in order to describe the removal mechanism of dye ions by waste marble dust. The pseudo-second order kinetic was the best fit kinetic model for the experimental data. Thermodynamics parameters such as Δ<em>G</em>, Δ<em>H</em> and Δ<em>S </em>were also calculated for the adsorption processes. The experimental data were used to construct an artificial neural network (ANN) model to predict removal of malachite green and acid blue 161 dyes by waste marble dust. A three-layer ANN, an input layer with four neurons, a hidden layer with 12 neurons, and an output layer with one neuron is constructed. Different training algorithms were tested on the model to obtain the proper weights and bias values for ANN model. The results show that waste marble dust is an efficient sorbent for malachite green dye and ANN network, which is easy to implement and is able to model the batch experimental system.</p> </div> <p>&nbsp;</p>

scholarly journals Removal of Basic Orange 2 dye and Ni2+ from aqueous solutions using alkaline-modified nanoclay

2021 ◽  
Author(s):  
Armin Geroeeyan ◽  
Ali Niazi ◽  
Elaheh Konoz
Keyword(s):  
Experimental Data ◽  
High Efficiency ◽  
Adsorption Process ◽  
Kinetic Equations ◽  
Dye Adsorption ◽  
Second Order ◽  
Isotherm Models ◽  
Order Kinetic ◽  
Diffusion Kinetic ◽  
Pseudo Second Order

Abstract In the present research, the removal of Basic Orange 2 (BO2) dye using alkaline-modified clay nanoparticles was studied. To characterize the adsorbent, XRD, FTIR, FESEM, EDX, BET and BJH analyses were performed. The effect of the variables influencing the dye adsorption process such as adsorbent dose, contact time, pH, stirring rate, temperature, and initial dye concentration was investigated. Furthermore, the high efficiency of Ni2+ removal indicated that it is possible to remove both dye and metal cation under the same optimum conditions. The experimental data were analyzed by Langmuir and Freundlich isotherm models. Fitting the experimental data to Langmuir isotherm indicated that the monolayer adsorption of dye occurred at homogeneous sites. Experimental data were also analyzed with pseudo-first-order, pseudo-second-order, and intra-particle diffusion kinetic equations for kinetic modeling of the dye removal process. The adsorption results indicated that the process follows a pseudo-second-order kinetic model. The thermodynamic parameters of the dye adsorption process such as enthalpy, entropy, and Gibbs free energy changes were calculated and revealed that the adsorption process was spontaneous and endothermic in nature. The results presented the high potential of the modified nanoclay as a cost-effective adsorbent for the removal of BO2 dye and Ni2+ from aqueous medium.

scholarly journals Preparation of Modified nano-SiO2 by Bismuth and Iron as a novel Remover of Methylene Blue from Water Solution

2017 ◽  
Vol 61 (3) ◽  
Author(s):  
Farhad Salimi ◽  
Keivan Tahmasobi ◽  
Changiz Karami ◽  
Alireza Jahangiri
Keyword(s):  
Methylene Blue ◽  
Contact Time ◽  
Water Solution ◽  
Freundlich Isotherm ◽  
Second Order ◽  
Order Kinetic ◽  
Freundlich Isotherms ◽  
Pseudo Second Order ◽  
Adsorption Treatment ◽  
Dyes Adsorption

Modified nano-silica with Bismuth and Iron adsorbent was synthesized to be used as an effective adsorbent material for methylene blue (MB) removal from water solution. The prepared samples were characterized using SEM, FTIR, XRD and TEM. The effect of experimental parameters such as pH, contact time and initial concentration on adsorption treatment were studied. Results indicated that the optimum conditions for maximum <strong>adsorption</strong> of 20 mg/L MB <strong>were:</strong> contact time of 20 minutes, pH= 5-6 and 8 gr/L adsorbent, the remaining MB in solution was 1.75%. Langmuir and Freundlich isotherms were employed to model the experimental results and the Freundlich isotherm was the best-fitting models for the experiment results. The kinetic data were also analyzed through pseudo-first-order and pseudo-second-order models. The pseudo-second-order kinetic model well depicted the kinetics of dyes adsorption on adsorbent.

In situ polymerization induced supramolecular hydrogels of chitosan and poly(acrylic acid-acrylamide) with high toughness

2017 ◽  
Vol 1 (2) ◽  
pp. 310-318 ◽  
Author(s):  
Jin Li ◽  
Zhilong Su ◽  
Xiaodong Ma ◽  
Hongjie Xu ◽  
Zixing Shi ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Acrylic Acid ◽  
Electrostatic Interaction ◽  
In Situ Polymerization ◽  
Supramolecular Hydrogel ◽  
High Toughness ◽  
Poly Acrylic Acid

A novel type of supramolecular hydrogel was developed byin situpolymerization of acrylic acid (AA) and acrylamide (AM) monomers in the aqueous solution of chitosan (CS) based on the dynamic electrostatic interaction of ions.

Sign in / Sign up

Export Citation Format

Share Document