Effective carbon and nutrient treatment solutions for mixed domestic-industrial wastewater in India

2015 ◽  
Vol 72 (4) ◽  
pp. 651-657 ◽  
Author(s):  
S. Saha ◽  
N. Badhe ◽  
D. Seuntjens ◽  
S. E. Vlaeminck ◽  
R. Biswas ◽  
...  
Keyword(s):  
Nutrient Removal ◽  
Urban Areas ◽  
Treatment Options ◽  
Sewage Treatment ◽  
Oxygen Demand ◽  
Anaerobic Treatment ◽  
Fecal Coliforms ◽  
Uasb Reactor ◽  
Anaerobic Sludge ◽  
Anaerobic Sludge Blanket

The present study evaluates effectiveness of up-flow anaerobic sludge blanket (UASB) reactor followed by two post-anaerobic treatment options, namely free-surface, up-flow constructed wetland (FUP-CW) and oxygen-limited anaerobic nitrification/denitrification (OLAND) processes in treating sewage from the peri-urban areas in India receiving illegal industrial infiltrations. The UASB studies yielded robust results towards fluctuating strength of sewage and consistently removed 87–98% chemical oxygen demand (COD) at a hydraulic retention time of 1.5–2 d. The FUP-CW removed 68.5 ± 13% COD, 68 ± 3% NH4+-N, 38 ± 5% PO43−-P, 97.6 ± 5% suspended particles and 97 ± 13% fecal coliforms. Nutrient removal was found to be limiting in FUP-CW, especially in winter. Nitrogen removal in the OLAND process were 100 times higher than the FUP-CW process. Results show that UASB followed by FUP-CW can be an excellent, decentralized sewage treatment option, except during winter when nutrient removal is limited in FUP-CW. Hence, the study proposes bio-augmentation of FUP-CW with OLAND biomass for overall improvement in the performance of UASB followed by FUP-CW process.

Impact of microaeration bioreactor on dissolved sulfide and methane removal from real UASB effluent for sewage treatment

2020 ◽  
Vol 81 (9) ◽  
pp. 1951-1960 ◽  
Author(s):  
C. S. Cabral ◽  
A. L. Sanson ◽  
R. J. C. F. Afonso ◽  
C. A. L. Chernicharo ◽  
J. C. Araújo
Keyword(s):  
Sewage Treatment ◽  
Oxygen Demand ◽  
Post Treatment ◽  
Upflow Anaerobic Sludge Blanket ◽  
Uasb Reactor ◽  
Anaerobic Sludge ◽  
Sulfide Removal ◽  
Dissolved Sulfide ◽  
Removal Efficiencies ◽  
Anaerobic Sludge Blanket

Abstract Two bioreactors were investigated as an alternative for the post-treatment of effluent from an upflow anaerobic sludge blanket (UASB) reactor treating domestic sewage, aiming at dissolved sulfide and methane removal. The bioreactors (R-control and R-air) were operated at different hydraulic retention times (HRT; 6 and 3 h) with or without aeration. Large sulfide and methane removal efficiencies were achieved by the microaerated reactor at HRT of 6 h. At this HRT, sulfide removal efficiencies were equal to 61% and 79%, and methane removal efficiencies were 31% and 55% for R-control and R-air, respectively. At an HRT of 3 h, sulfide removal efficiencies were 22% (R-control) and 33% (R-air) and methane removal did not occur. The complete oxidation of sulfide, with sulfate formation, prevailed in both phases and bioreactors. However, elemental sulfur formation was more predominant at an HRT of 6 h than at an HRT of 3 h. Taken together, the results show that post-treatment improved the anaerobic effluent quality in terms of chemical oxygen demand and solids removal. However, ammoniacal nitrogen was not removed due to either the low concentration of air provided or the absence of microorganisms involved in the nitrogen cycle.

Evaluation of sludge properties in a pilot-scale UASB reactor for sewage treatment in a temperate region

2011 ◽  
Vol 64 (10) ◽  
pp. 1959-1966 ◽  
Author(s):  
K. Syutsubo ◽  
W. Yoochatchaval ◽  
I. Tsushima ◽  
N. Araki ◽  
K. Kubota ◽  
...  
Keyword(s):  
Suspended Solids ◽  
Sewage Treatment ◽  
Oxygen Demand ◽  
Pilot Scale ◽  
Upflow Anaerobic Sludge Blanket ◽  
Uasb Reactor ◽  
Anaerobic Sludge ◽  
Methanogenic Activity ◽  
Working Volume ◽  
Anaerobic Sludge Blanket

In this study, continuous operation of a pilot-scale upflow anaerobic sludge blanket (UASB) reactor for sewage treatment was conducted for 630 days to investigate the physical and microbial characteristics of the retained sludge. The UASB reactor with a working volume of 20.2 m3 was operated at ambient temperature (16–29 °C) and seeded with digested sludge. After 180 days of operation, when the sewage temperature had dropped to 20 °C or lower, the removal efficiency of both total suspended solids (TSS) and total biochemical oxygen demand (BOD) deteriorated due to washout of retained sludge. At low temperature, the cellulose concentration of the UASB sludge increased owing to the rate limitation of the hydrolytic reaction of suspended solids in the sewage. However, after an improvement in sludge retention (settleability and concentration) in the UASB reactor, the process performance stabilized and gave sufficient results (68% of TSS removal, 75% of total BOD removal) at an hydraulic retention time (HRT) of 9.7 h. The methanogenic activity of the retained sludge significantly increased after day 246 due to the accumulation of Methanosaeta and Methanobacterium following the improvement in sludge retention in the UASB reactor. Acid-forming bacteria from phylum Bacteroidetes were detected at high frequency; thus, these bacteria may have an important role in suspended solids degradation.

scholarly journals Influence of Pre-Hydrolysis on Sewage Treatment in an Up-Flow Anaerobic Sludge BLANKET (UASB) Reactor: A Review

Water ◽  
2019 ◽  
Vol 11 (2) ◽  
pp. 372 ◽  
Author(s):  
Rajinikanth Rajagopal ◽  
Mahbuboor Choudhury ◽  
Nawrin Anwar ◽  
Bernard Goyette ◽  
Md. Rahaman
Keyword(s):  
Suspended Solids ◽  
Biogas Production ◽  
Sewage Treatment ◽  
Oxygen Demand ◽  
High Rate ◽  
Uasb Reactor ◽  
Organic Loading Rate ◽  
Anaerobic Sludge ◽  
Two Phase ◽  
Anaerobic Sludge Blanket

The up-flow anaerobic sludge blanket (UASB) process has emerged as a promising high-rate anaerobic digestion technology for the treatment of low- to high-strength soluble and complex wastewaters. Sewage, a complex wastewater, contains 30–70% particulate chemical oxygen demand (CODP). These particulate organics degrade at a slower rate than the soluble organics found in sewage. Accumulation of non-degraded suspended solids can lead to a reduction of active biomass in the reactor and hence a deterioration in its performance in terms of acid accumulation and poor biogas production. Hydrolysis of the CODP in sewage prior to UASB reactor will ensure an increased organic loading rate and better UASB performance. While single-stage UASB reactors have been studied extensively, the two-phase full-scale treatment approach (i.e., a hydrolysis unit followed by an UASB reactor) has still not yet been commercialized worldwide. The concept of treating sewage containing particulate organics via a two-phase approach involves first hydrolyzing and acidifying the volatile suspended solids without losing carbon (as methane) in the first reactor and then treating the soluble sewage in the UASB reactor. This work reviews the available literature to outline critical findings related to the treatment of sewage with and without hydrolysis before the UASB reactor.

scholarly journals The Concept of Wastes to Energy Using Sugary Wastes

2012 ◽  
Vol 9 ◽  
pp. 57-62
Author(s):  
Fiza Sarwar ◽  
Wajeeha Malik ◽  
Muhammad Salman Ahmed ◽  
Harja Shahid
Keyword(s):  
Volatile Fatty Acids ◽  
Loading Rate ◽  
Biogas Production ◽  
Oxygen Demand ◽  
Uasb Reactor ◽  
Organic Loading Rate ◽  
Anaerobic Sludge ◽  
Loading Rates ◽  
Sugar Mills ◽  
Anaerobic Sludge Blanket

Abstract: This study was designed using actual effluent from the sugary mills in an Up-flow Anaerobic Sludge Blanket (UASB) Reactor to evaluate treatability performance. The reactor was started-up in step-wise loading rates beginning from 0.05kg carbon oxygen demand (COD)/m3-day to 3.50kg-COD/m3-day. The hydraulic retention time (HRT) was slowly decreased from 96 hrs to eight hrs. It was observed that the removal efficiency of COD of more than 73% can be easily achieved at an HRT of more than 16 hours corresponding to an average organic loading rate (OLR) of 3.0kg-COD/m3-day, at neutral pH and constant temperature of 29°C. The average VFAs (volatile fatty acids) and biogas production was observed as 560mg/L and 1.6L/g-CODrem-d, respectively. The average methane composition was estimated as 62%. The results of this study suggest that the treatment of sugar mills effluent with the anaerobic technology seems to be more reliable, effective and economical.DOI: http://dx.doi.org/10.3126/hn.v9i0.7075 Hydro Nepal Vol.9 July 2011 57-62

Anaerobic treatment of proteinaceous wastewater under mesophilic and thermophilic conditions

1999 ◽  
Vol 40 (1) ◽  
pp. 77-84 ◽  
Author(s):  
H. H. P. Fang ◽  
D. Wai-Chung Chung
Keyword(s):  
Bacterial Species ◽  
Oxygen Demand ◽  
Anaerobic Treatment ◽  
Upflow Anaerobic Sludge Blanket ◽  
Anaerobic Sludge ◽  
Loading Rates ◽  
Batch Tests ◽  
Thermophilic Conditions ◽  
Anaerobic Sludge Blanket ◽  
Hydrolysis Of

Experiments were conducted in two 2.8 liter UASB (upflow anaerobic sludge blanket) reactors treating proteinaceous wastewaters at 37° and 55°C with 9 hours of hydraulic retention. Results showed that the mesophilic reactor consistently removed 83.5-85.1% of COD (chemical oxygen demand) at loading rates ranging 8-22 g COD l−1 d−1 (corresponding to 3000-8250 mg l−1 of proteinaceous COD in wastewater), whereas the thermophilic reactor removed only 68.5-82.7%. At 32 g COD l−1 d−1 (i.e. 12000 mg COD l−1), the removal efficiencies were lowered to 75.7% in the mesophilic reactor and 65.1% in the thermophilic reactor. At 42 g COD l−1 d−1, severe sludge washout occurred in the mesophilic reactor; at the same loading rate, the thermophilic reactor removed only 53.8% of COD even though sludge washout was under control. The degradation rate in the both reactors was limited by the initial hydrolysis of proteins. However, batch tests showed that thermophilic sludge had slightly higher methanogenic activities than mesophilic sludge in treating proteins and intermediate acids, except propionate. The sludge yields in mesophilic and thermophilic reactors were 0.066 and 0.099 g VSS g COD−1, respectively. Observations by scanning electron microscopy indicated that both types of sludge granules were of irregular shape. There was little noticeable difference between the two granules; both had neither a layered microstructure nor a predominant bacterial species.

Toxicity and treatability of leachate: application of UASB reactor for leachate treatment from Okhla landfill, New Delhi

2012 ◽  
Vol 65 (10) ◽  
pp. 1887-1894 ◽  
Author(s):  
V. Singh ◽  
A. K. Mittal
Keyword(s):  
Oxygen Demand ◽  
Upflow Anaerobic Sludge Blanket ◽  
Uasb Reactor ◽  
Organic Loading Rate ◽  
Anaerobic Sludge ◽  
New Delhi ◽  
Leachate Treatment ◽  
Feed Composition ◽  
Laboratory Scale Reactor ◽  
Anaerobic Sludge Blanket

This study reports applicability of upflow anaerobic sludge blanket (UASB) process to treat the leachate from a municipal landfill located in Delhi. A laboratory scale reactor was operated at an organic loading rate of 3.00 kg chemical oxygen demand (COD)/m3 d corresponding to a hydraulic retention time (HRT) of 12 h for over 8 months. The effect of toxicity of leachate, and feed composition on the treatability of leachate was evaluated. Average COD of the leachate, during the study period varied between 8,880 and 66,420 mg/l. Toxicity of the leachate used during a period of 8 months varied from LC50 1.22 to 12.35 for 96 h. The removal efficiency of soluble COD ranged between 91 and 67% for fresh leachate and decreased drastically from 90 to 35% for old leachate having high toxicity. The efficiency varied from 81 to 65%. The reactor performed more efficiently for the treatment of fresh leachate (less toxic, LC50 11.64, 12.35, and 12.15 for 96 h) as compared with old leachate (more toxic, LC50 1.22 for 96 h). Toxicity of the leachate affected its treatment potential by the UASB.

Effect of micro-nutrients in anaerobic degradation of sulfate laden organics

2004 ◽  
Vol 31 (3) ◽  
pp. 420-431 ◽  
Author(s):  
S K Patidar ◽  
Vinod Tare
Keyword(s):  
Anaerobic Degradation ◽  
Oxygen Demand ◽  
Cod Removal ◽  
Upflow Anaerobic Sludge Blanket ◽  
Uasb Reactor ◽  
Anaerobic Sludge ◽  
Sulfide Concentration ◽  
Anaerobic Baffled Reactor ◽  
Sulfide Toxicity ◽  
Anaerobic Sludge Blanket

The effect of micro-nutrients, such as Fe, Ni, Zn, Co, and Mo, on anaerobic degradation of sulfate laden organics was investigated using bench-scale models of upflow anaerobic sludge blanket (UASB) reactor, anaerobic baffled reactor (ABR), and hybrid anaerobic baffled reactor (HABR), operating in varying conditions in ten phases (organic loading of 1.9–5.75 kg COD/(m3·d), sulfate loading of 0.54–1.88 kg SO42–/(m3·d), chemical oxygen demand (COD):SO42–ratio of 2.0–8.6). In the initial phase, no nutrient limitation was observed with COD removal of more than 94% in all three systems. Subsequently, increase in sulfate loading resulted in Ni and Co limitation and their supplementation restored COD removal in UASB system. However, baffled systems did not recover because of severe inhibition by sulfide. Results indicate that precipitation of nutrients could seriously deteriorate process performance, leading to failure even before sulfide concentration attains toxic level. The limitation of Fe coupled with high sulfate loading (1.88 kg SO42–/(m3·d)) resulted in growth of low-density, fragile, hollow, and granular biomass in UASB that washed out and caused process instability. Supplementation of Fe with other nutrients stabilized UASB process and also improved COD removal.Key words: anaerobic degradation, nutrients, UASB, ABR, HABR, sulfide toxicity, sulfate laden organics.

Mathematical modeling of upflow anaerobic sludge blanket (UASB) reactor treating domestic wastewater

2013 ◽  
Vol 67 (1) ◽  
pp. 24-32 ◽  
Author(s):  
Tarek Elmitwalli
Keyword(s):  
Chemical Oxygen Demand ◽  
Dynamic Model ◽  
Empirical Model ◽  
Oxygen Demand ◽  
Domestic Wastewater ◽  
Upflow Anaerobic Sludge Blanket ◽  
Uasb Reactor ◽  
Anaerobic Sludge ◽  
Model Based ◽  
Anaerobic Sludge Blanket

Although the upflow anaerobic sludge blanket (UASB) reactor has been widely applied for domestic wastewater treatment in many developing countries, there is no sufficient mathematical model for proper design and operation of the reactor. An empirical model based on non-linear regression was developed to represent the physical and chemical removal of suspended solids (SS) in the reactor. Moreover, a simplified dynamic model based on ADM1 and the empirical model for SS removal was developed for anaerobic digestion of the entrapped SS and dissolved matter in the wastewater. The empirical model showed that effluent suspended chemical oxygen demand (CODss) concentration is directly proportional to the influent CODss concentration and inversely proportional to both the hydraulic retention time (HRT) of the reactor and wastewater temperature. For obtaining sufficient CODss removal, the HRT of the UASB reactor must be higher than 4 h, and higher HRT than 12 h slightly improved CODss removal. The dynamic model results showed that the required time for filling the reactor with sludge mainly depends on influent total chemical oxygen demand (CODt) concentration and HRT. The influent CODt concentration, HRT and temperature play a crucial role on the performance of the reactor. The results indicated that shorter HRT is needed for optimization of CODt removal, as compared with optimization of CODt conversion to methane. Based on the model results, the design HRT of the UASB reactor should be selected based on the optimization of wastewater conversion and minimization of biodegradable SS accumulation in the sludge bed, not only based on COD removal, to guarantee a stable reactor performance.

A downflow hanging sponge (DHS) reactor for faecal coliform removal from an upflow anaerobic sludge blanket (UASB) effluent

2015 ◽  
Vol 72 (11) ◽  
pp. 2034-2044 ◽  
Author(s):  
Rosa Elena Yaya Beas ◽  
Katarzyna Kujawa-Roeleveld ◽  
Jules B. van Lier ◽  
Grietje Zeeman
Keyword(s):  
Oxygen Demand ◽  
Faecal Coliform ◽  
Upflow Anaerobic Sludge Blanket ◽  
Uasb Reactor ◽  
Anaerobic Sludge ◽  
Loading Rates ◽  
Removal Capacity ◽  
Seed Crops ◽  
Anaerobic Sludge Blanket

This research was conducted to study the faecal coliforms removal capacity of downflow hanging sponge (DHS) reactors as a post-treatment for an upflow anaerobic sludge blanket (UASB) reactor. Three long-term continuous laboratory-scale DHS reactors, i.e. a reactor with cube type sponges without recirculation, a similar one with recirculation and a reactor with curtain type sponges, were studied. The porosities of the applied medium were 91%, 87% and 47% respectively. The organic loading rates were 0.86 kgCOD m−3 d−1, 0.53 kgCOD m−3 d−1 and 0.24 kgCOD m−3 d−1 correspondingly at hydraulic loading rates of 1.92 m3 m−2 d−1, 2.97 m3 m−2 d−1 and 1.32 m3 m−2 d−1, respectively (COD: chemical oxygen demand). The corresponding averages for faecal coliform removal were 99.997%, 99.919% and 92.121% respectively. The 1989 WHO guidelines standards, in terms of faecal coliform content for unrestricted irrigation (category A), was achieved with the effluent of the cube type DHS (G1) without recirculation. Restricted irrigation, category B and C, is assigned to the effluent of the cube type with recirculation and the curtain type, respectively. Particularly for organic compounds, the effluent of evaluated DHS reactors complies with USEPA standards for irrigation of so called non-food crops like pasture for milking animals, fodder, fibre, and seed crops.

Anaerobic treatment of crude glycerol from biodiesel production

2015 ◽  
Vol 72 (8) ◽  
pp. 1383-1389 ◽  
Author(s):  
M. M. Nakazawa ◽  
W. R. S. Silva Júnior ◽  
M. T. Kato ◽  
S. Gavazza ◽  
L. Florencio
Keyword(s):  
Crude Glycerol ◽  
Denaturing Gradient Gel Electrophoresis ◽  
Biogas Production ◽  
Oxygen Demand ◽  
Experimental Period ◽  
Anaerobic Treatment ◽  
Biodiesel Production ◽  
Uasb Reactor ◽  
Anaerobic Sludge ◽  
Reactor Performance

In this study, we evaluated the use of an up-flow anaerobic sludge blanket (UASB) reactor to treat crude glycerol obtained from cottonseed biodiesel production. The laboratory-scale UASB reactor (7.0 L) was operated at ambient temperature of 26.5°C with chemical oxygen demand (COD) concentrations between 0.5 and 8.0 g/L. The volatile fatty acid contents, pH, inorganic salt contents and biogas production were monitored during a 280-day experimental period. Molecular biology techniques were used to assess the microbial diversity in the bioreactor. The reactor achieved COD removal efficiencies of up to 92% except during one phase when the efficiency decreased to 81%. Biogas production remained stable throughout the experimental period, when the fraction converted to methane reached values as high as 68%. The profile of the denaturing gradient gel electrophoresis (DGGE) bands suggested slight changes in the microbial community during reactor operation. The overall results indicated that the crude glycerol from biodiesel production can serve as a suitable substrate for anaerobic degradation with a stable reactor performance and biogas production as long as the applied organic loads are up to 8.06 kg COD/m3·d.

Sign in / Sign up

Export Citation Format

Share Document