Phytoremediation of acid mine drainage using by-product of lysine fermentation

Abstract The main point of this research is to assess the applicability of condensed molasses soluble (CMS), which is an organic by-product of lysine fermentation, as an environmentally friendly complexing agent in rhizofiltration of heavy metal contaminated acid mine drainage (AMD). First, the ecotoxicological properties (growth inhibition, seed germination) of CMS were examined with often applied indicator plant species such as duckweed (Lemna minor) and lettuce (Lactuca sativa) so as to define the possible applicable CMS concentration. Then the heavy metal accumulation and translocation properties of root accumulator plant species, i.e. common reed (Phragmites australis) and sedge (Carex flacca), were studied to optimize CMS concentration for rhizofiltration. Due to the CMS application, significant increase in bioaccumulation was detected in the case of every examined heavy metal (As, Cd, Cu, Pb and Zn) at the end of the experiment. Results also showed that CMS increased the heavy metal concentration in shoots, but did not affect the root accumulation characteristics of the plants. Furthermore, CMS treated plants accumulated heavy metals at higher rates in their roots compared to control. The results suggest that CMS is a viable additive and a complexing agent to aid rhizofiltration of heavy metal contaminated AMD.

Download Full-text

Field Study on Heavy Metal Accumulation in a Natural Wetland Receiving Acid Mine Drainage

MATERIALS TRANSACTIONS ◽

10.2320/matertrans.42.1877 ◽

2001 ◽

Vol 42 (9) ◽

pp. 1877-1884

Author(s):

Keiko Sasaki ◽

Tagiru Ogino ◽

Yuji Endo ◽

Kunihiko Kurosawa

Keyword(s):

Heavy Metal ◽

Acid Mine Drainage ◽

Field Study ◽

Metal Accumulation ◽

Mine Drainage ◽

Heavy Metal Accumulation ◽

Natural Wetland ◽

Acid Mine

Download Full-text

Field Study on Heavy Metal Accumulation in a Natural Wetland Receiving Acid Mine Drainage

MATERIALS TRANSACTIONS ◽

10.2320/matertrans.44.1877 ◽

2003 ◽

Vol 44 (9) ◽

pp. 1877-1884 ◽

Cited By ~ 10

Author(s):

Keiko Sasaki ◽

Tagiru Ogino ◽

Yuji Endo ◽

Kunihiko Kurosawa

Keyword(s):

Heavy Metal ◽

Acid Mine Drainage ◽

Field Study ◽

Metal Accumulation ◽

Mine Drainage ◽

Heavy Metal Accumulation ◽

Natural Wetland ◽

Acid Mine

Download Full-text

Comparison of heavy metal accumulation in a natural wetland and constructed wetlands receiving acid mine drainage

Ecological Engineering ◽

10.1016/s0925-8574(00)00112-9 ◽

2001 ◽

Vol 16 (4) ◽

pp. 487-500 ◽

Cited By ~ 164

Author(s):

P.A Mays ◽

G.S Edwards

Keyword(s):

Heavy Metal ◽

Acid Mine Drainage ◽

Constructed Wetlands ◽

Metal Accumulation ◽

Mine Drainage ◽

Heavy Metal Accumulation ◽

Natural Wetland ◽

Acid Mine

Download Full-text

Recent developments in materials used for the removal of metal ions from acid mine drainage

Applied Water Science ◽

10.1007/s13201-020-01350-9 ◽

2021 ◽

Vol 11 (2) ◽

Author(s):

Tebogo M. Mokgehle ◽

Nikita T. Tavengwa

Keyword(s):

Heavy Metal ◽

Surface Water ◽

Acid Mine Drainage ◽

Metal Ions ◽

Mine Drainage ◽

Acid Mine ◽

Adsorption Capacities ◽

Ion Imprinted ◽

Wide Range ◽

Ion Imprinted Polymers

AbstractAcid mine drainage is the reaction of surface water with sub-surface water located on sulfur bearing rocks, resulting in sulfuric acid. These highly acidic conditions result in leaching of non-biodegradeable heavy metals from rock which then accumulate in flora, posing a significant environmental hazard. Hence, reliable, cost effective remediation techniques are continuously sought after by researchers. A range of materials were examined as adsorbents in the extraction of heavy metal ions from acid mine drainage (AMD). However, these materials generally have moderate to poor adsorption capacities. To address this problem, researchers have recently turned to nano-sized materials to enhance the surface area of the adsorbent when in contact with the heavy metal solution. Lately, there have been developments in studying the surface chemistry of nano-engineered materials during adsorption, which involved alterations in the physical and chemical make-up of nanomaterials. The resultant surface engineered nanomaterials have been proven to show rapid adsorption rates and remarkable adsorption capacities for removal of a wide range of heavy metal contaminants in AMD compared to the unmodified nanomaterials. A brief overview of zeolites as adsorbents and the developent of nanosorbents to modernly applied magnetic sorbents and ion imprinted polymers will be discussed. This work provides researchers with thorough insight into the adsorption mechanism and performance of nanosorbents, and finds common ground between the past, present and future of these versatile materials.

Download Full-text

Influence of Monovalent Cations on the Efficiency of Ferrous Ion Oxidation, Total Iron Precipitation, and Adsorptive Removal of Cr(VI) and As(III) in Simulated Acid Mine Drainage with Inoculation of Acidithiobacillus ferrooxidans

Metals ◽

10.3390/met8080596 ◽

2018 ◽

Vol 8 (8) ◽

pp. 596 ◽

Cited By ~ 2

Author(s):

Yongwei Song ◽

Heru Wang ◽

Jun Yang ◽

Yanxiao Cao

Keyword(s):

Heavy Metal ◽

Acid Mine Drainage ◽

Acidithiobacillus Ferrooxidans ◽

Mine Drainage ◽

Metal Removal ◽

Heavy Metal Removal ◽

Monovalent Cations ◽

Iron Minerals ◽

Acid Mine ◽

Removal Efficiencies

Acid mine drainage is highly acidic and contains large quantities of Fe and heavy metal elements. Thus, it is important to promote the transformation of Fe into secondary iron minerals that exhibit strong heavy-metal removal abilities. Using simulated acid mine drainage, this work analyzes the influence of monovalent cations (K+, NH4+, and Na+) on the Fe2+ oxidation and total Fe deposition efficiencies, as well as the phases of secondary iron minerals in an Acidithiobacillus ferrooxidans system. It also compares the Cr(VI) (K2Cr2O7) and As(III) (As2O3) removal efficiencies of different schwertmannites. The results indicated that high concentrations of monovalent cations (NH4+ ≥ 320 mmol/L, and Na+ ≥ 1600 mmol/L) inhibited the biological oxidation of Fe2+. Moreover, the mineralizing abilities of the three cations differed (K+ > NH4+ > Na+), with cumulative Fe deposition efficiencies of 58.7%, 28.1%, and 18.6%, respectively [n(M) = 53.3 mmol/L, cultivation time = 96 h]. Additionally, at initial Cr(VI) and As(III) concentrations of 10 and 1 mg/L, respectively, the Cr(VI) and As(III) removal efficiencies exhibited by schwertmannites acquired by the three mineralization systems differed [n(Na) = 53.3 > n(NH4) = 53.3 > n(K) = 0.8 mmol/L]. Overall, the analytical results suggested that the removal efficiency of toxic elements was mainly influenced by the apparent structure, particle size, and specific surface area of schwertmannite.

Download Full-text