Numerical study of the flow of a mixture of reacting gases in an inhomogeneous catalyst layer

2003 ◽  
Vol 3 ◽  
pp. 246-254
Author(s):  
C.I. Mikhaylenko ◽  
S.F. Urmancheev

The behavior of a liquid flowing through a fixed bulk porous layer of a granular catalyst is considered. The effects of the nonuniformity of the fluid velocity field, which arise when the surface of the layer is curved, and the effect of the resulting inhomogeneity on the speed and nature of the course of chemical reactions are investigated by the methods of a computational experiment.

1993 ◽  
Vol 115 (3) ◽  
pp. 302-312 ◽  
Author(s):  
J. H. Terhune ◽  
K. Karim-Panahi

The free vibration of cylindrical shells filled with a compressible viscous fluid has been studied by numerous workers using the linearized Navier-Stokes equations, the fluid continuity equation, and Flu¨gge ’s equations of motion for thin shells. It happens that solutions can be obtained for which the interface conditions at the shell surface are satisfied. Formally, a characteristic equation for the system eigenvalues can be written down, and solutions are usually obtained numerically providing some insight into the physical mechanisms. In this paper, we modify the usual approach to this problem, use a more rigorous mathematical solution and limit the discussion to a single thin shell of infinite length and finite radius, totally filled with a viscous, compressible fluid. It is shown that separable solutions are obtained only in a particular gage, defined by the divergence of the fluid velocity vector potential, and the solutions are unique to that gage. The complex frequency dependence for the transverse component of the fluid velocity field is shown to be a result of surface interaction between the compressional and vortex motions in the fluid and that this motion is confined to the boundary layer near the surface. Numerical results are obtained for the first few wave modes of a large shell, which illustrate the general approach to the solution. The axial wave number is complex for wave propagation, the imaginary part being the spatial attenuation coefficient. The frequency is also complex, the imaginary part of which is the temporal damping coefficient. The wave phase velocity is related to the real part of the axial wave number and turns out to be independent of frequency, with numerical value lying between the sonic velocities in the fluid and the shell. The frequency dependencies of these parameters and fluid velocity field mode shapes are computed for a typical case and displayed in non-dimensional graphs.


2020 ◽  
Vol 118 (7) ◽  
pp. 1576-1587 ◽  
Author(s):  
Yuka Sakuma ◽  
Toshihiro Kawakatsu ◽  
Takashi Taniguchi ◽  
Masayuki Imai

2019 ◽  
Vol 23 (5 Part B) ◽  
pp. 3153-3164 ◽  
Author(s):  
Hamid Mohammadiun ◽  
Vahid Amerian ◽  
Mohammad Mohammadiun ◽  
Iman Khazaee ◽  
Mohsen Darabi ◽  
...  

The steady-state, viscous flow and heat transfer of nanofluid in the vicinity of an axisymmetric stagnation point of a stationary cylinder with constant wall heat flux is investigated. The impinging free-stream is steady and with a constant strain rate, k ?. Exact solution of the Navier-Stokes equations and energy equation are derived in this problem. A reduction of these equations is obtained by use of appropriate transformations introduced in this research. The general self-similar solution is obtained when the wall heat flux of the cylinder is constant. All the previous solutions are presented for Reynolds number Re = k ?a2/2n f ranging from 0.1 to 1000, selected values of heat flux and selected values of particle fractions where a is cylinder radius and n f is kinematic viscosity of the base fluid. For all Reynolds numbers, as the particle fraction increases, the depth of diffusion of the fluid velocity field in radial direction, the depth of the diffusion of the fluid velocity field in z-direction, shear-stresses and pressure function decreases. However, the depth of diffusion of the thermal boundary-layer increases. It is clear by adding nanoparticles to the base fluid there is a significant enhancement in Nusselt number and heat transfer.


2018 ◽  
Vol 2018 (0) ◽  
pp. J0520105
Author(s):  
Miyu IWATA ◽  
Shuhei SUGIYAMA ◽  
Tomoya HOURA ◽  
Hirofumi HATTORI ◽  
Masato TAGAWA

Author(s):  
David J. Schmidt ◽  
Goodarz Ahmadi

The motions of deformable liquid droplets in a turbulent spray are simulated numerically using a three-dimensional joint, one-way coupled Lagrangian-Eulerian simulation technique. The instantaneous fluid velocity and velocity gradient of the continuous phase is simulated with the use of an advanced Navier-Stokes based Lagrangian PDF (probability density function) stochastic model. This model is used to simulate the turbulent structures known to exist within the shear layers of a plane and axisymmetric jet. The mean fluid velocity field is obtained with the use of the FLUENT computer code, using the Reynolds stress transport turbulence model. The dilute phase is modeled as a series of continuously injected spheres, with no particle-particle interactions. Forces on the particles include nonlinear Stokes drag and Saffman lift. Multiple particle trajectories are then numerically evaluated by integrating the equations of motion using the computed fluid velocity field as input. Ensembles of particle trajectories are generated for a point and line source emanating near the inlet to the spray chamber. Test cases for an axisymmetric jet are considered. Results show agreement in the instantaneous flow field for all lower statistical moments. For a turbulent spray consisting of nonevaporating spherical droplets, good qualitative agreement is seen in the overall dispersion of droplets as well as the corresponding spray angle.


2011 ◽  
Vol 354-355 ◽  
pp. 83-86
Author(s):  
Ya Qing Liu ◽  
Lian Cun Zheng ◽  
Jun Tie

Axial magnetohydrodynamic (MHD) flows for Oldroyd-B fluid are investigated between two cylinders. The motion of the fluid is produced by the two oscillating cylinders. The fractional calculus approach is introduced to establish the constitutive relationship of a viscolastic fluid. Velocity field and shear stress of the motion are determined in terms of Bessel function and generalized Mittag-Leffler function by using Laplace transform and Hankel transform. The influence of pertinent parameters on the flows is delineated and appropriate conclusions are drawn.


1991 ◽  
Vol 20 (4) ◽  
pp. 359-371 ◽  
Author(s):  
Zhongquan Wu ◽  
Junhua Zhu ◽  
Su Chen ◽  
Lin Yang ◽  
Hongqing Xu ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document