scholarly journals Summary Report on FY12 Small-Scale Test Activities High Temperature Electrolysis Program

2012 ◽  
Author(s):  
James O'Brien
Keyword(s):  
High Temperature ◽  
Small Scale ◽  
Summary Report ◽  
Scale Test ◽  
High Temperature Electrolysis

scholarly journals High temperature mechanical deformation of an additive manufactured nickel based superalloy using small scale test methods

2018 ◽  
Vol 1 (S1) ◽  
pp. 21
Author(s):  
H. Hilal ◽  
R.J. Lancaster ◽  
S.P. Jeffs ◽  
L. Ednie ◽  
J. Boswell ◽  
...  
Keyword(s):  
High Temperature ◽  
Mechanical Deformation ◽  
Test Methods ◽  
Small Scale ◽  
Nickel Based Superalloy ◽  
Scale Test

Study of Multiaspect and Multistatic Sonar Systems Using a Small-Scale Test Bed

2010 ◽  
Author(s):  
Jon La Follett ◽  
John Stroud ◽  
Pat Malvoso ◽  
Joseph Lopes ◽  
Raymond Lim ◽  
...  
Keyword(s):  
Small Scale ◽  
Test Bed ◽  
Sonar Systems ◽  
Scale Test

scholarly journals Study of high-temperature oxygen combustion (HiTOx) and its heating performance using a laboratory-scale test furnace

2021 ◽  
pp. 117077
Author(s):  
Hisashi Nakamura ◽  
Yuji Kuwayama ◽  
Takakazu Onishi ◽  
Takuya Tezuka ◽  
Susumu Hasegawa ◽  
...  
Keyword(s):  
High Temperature ◽  
Laboratory Scale ◽  
Heating Performance ◽  
Scale Test ◽  
Test Furnace

Economic and environmental competitiveness of high temperature electrolysis for hydrogen production

2021 ◽  
Author(s):  
Kavan Motazedi ◽  
Yaser Khojasteh Salkuyeh ◽  
Ian J. Laurenzi ◽  
Heather L. MacLean ◽  
Joule A. Bergerson
Keyword(s):  
High Temperature ◽  
Hydrogen Production ◽  
High Temperature Electrolysis

Two-stage stochastic programming-based capacity optimization for a high-temperature electrolysis system considering dynamic operation strategies

2021 ◽  
Vol 40 ◽  
pp. 102733
Author(s):  
Ruomei Qi ◽  
Yiwei Qiu ◽  
Jin Lin ◽  
Yonghua Song ◽  
Wenying Li ◽  
...  
Keyword(s):  
High Temperature ◽  
Stochastic Programming ◽  
Capacity Optimization ◽  
Two Stage ◽  
Dynamic Operation ◽  
Electrolysis System ◽  
High Temperature Electrolysis

scholarly journals Mechanical Properties of Spruce Wood Extracted from GLT Beams Loaded by Fire

2021 ◽  
Vol 13 (10) ◽  
pp. 5494
Author(s):  
Lucie Kucíková ◽  
Michal Šejnoha ◽  
Tomáš Janda ◽  
Jan Sýkora ◽  
Pavel Padevět ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
High Temperature ◽  
Cross Section ◽  
Negative Impact ◽  
Tensile Tests ◽  
Thermal Recovery ◽  
Bending Test ◽  
Small Scale ◽  
Spruce Wood ◽  
The Impact

Heating wood to high temperature changes either temporarily or permanently its physical properties. This issue is addressed in the present contribution by examining the effect of high temperature on residual mechanical properties of spruce wood, grounding on the results of full-scale fire tests performed on GLT beams. Given these tests, a computational model was developed to provide through-thickness temperature profiles allowing for the estimation of a charring depth on the one hand and on the other hand assigning a particular temperature to each specimen used subsequently in small-scale tensile tests. The measured Young’s moduli and tensile strengths were accompanied by the results from three-point bending test carried out on two groups of beams exposed to fire of a variable duration and differing in the width of the cross-section, b=100 mm (Group 1) and b=160 mm (Group 2). As expected, increasing the fire duration and reducing the initial beam cross-section reduces the residual bending strength. A negative impact of high temperature on residual strength has also been observed from simple tensile tests, although limited to a very narrow layer adjacent to the charring front not even exceeding a typically adopted value of the zero-strength layer d0=7 mm. On the contrary, the impact on stiffness is relatively mild supporting the thermal recovery property of wood.

scholarly journals A Novel Niosome-Encapsulated Essential Oil Formulation to Prevent Aspergillus flavus Growth and Aflatoxin Contamination of Maize Grains During Storage

Toxins ◽  
2019 ◽  
Vol 11 (11) ◽  
pp. 646 ◽  
Author(s):  
García-Díaz ◽  
Patiño ◽  
Vázquez ◽  
Gil-Serna
Keyword(s):  
Aspergillus Flavus ◽  
Fungal Growth ◽  
Storage Conditions ◽  
Aflatoxin Contamination ◽  
Small Scale ◽  
Low Concentrations ◽  
Oil Formulation ◽  
Scale Test ◽  
Encapsulation Method

Aflatoxin (AF) contamination of maize is a major concern for food safety. The use of chemical fungicides is controversial, and it is necessary to develop new effective methods to control Aspergillus flavus growth and, therefore, to avoid the presence of AFs in grains. In this work, we tested in vitro the effect of six essential oils (EOs) extracted from aromatic plants. We selected those from Satureja montana and Origanum virens because they show high levels of antifungal and antitoxigenic activity at low concentrations against A. flavus. EOs are highly volatile compounds and we have developed a new niosome-based encapsulation method to extend their shelf life and activity. These new formulations have been successfully applied to reduce fungal growth and AF accumulation in maize grains in a small-scale test, as well as placing the maize into polypropylene woven bags to simulate common storage conditions. In this latter case, the antifungal properties lasted up to 75 days after the first application.

BLISS@CNR-Pisa: a flexible laser for small scale test experiments on fusion oriented physics

2010 ◽  
Author(s):  
O. Ciricosta ◽  
L. Labate ◽  
S. Atzeni ◽  
A. Barbini ◽  
D. Batani ◽  
...  
Keyword(s):  
Small Scale ◽  
Scale Test

Corrosion Testing of Armour Wire in Simulated Annulus Environments of Flexible Pipelines: An Update

2003 ◽  
Author(s):  
Richard Clements ◽  
Andrew D. Ethridge
Keyword(s):  
Deionized Water ◽  
Small Scale ◽  
General Corrosion ◽  
Flexible Pipe ◽  
Scale Test ◽  
Condensed Water ◽  
Test Cells ◽  
Sour Service ◽  
First Time ◽  
Permeation Models

This paper describes further investigations, utilising small scale test cells, into the general corrosion which can occur on wires within the inherent annulus space in a flexible pipe, particularly, and for the first time, in a sour service (H2S containing) environment. The work enhances data presented previously in 2002. Tests have been performed in cells specifically designed to simulate, as closely as possible, the environment and confines of a flexible pipe annulus, using solutions of both deionized water and seawater (to represent seawater flooding and condensed water). The systems were saturated with CO2 and H2S to simulate permeation of gases through the polymer pressure sheath (as predicted by validated permeation models). Weight loss measurements were undertaken in order to quantify the corrosion rate in these simulated annulus environments and metallography was undertaken to characterise the corrosion and check for HIC/SOHIC.

Dynamic Modelling of Small Scale and High Temperature ORC System Using Simulink and CoolProp

2021 ◽  
Author(s):  
Radheesh Dhanasegaran ◽  
Antti Uusitalo ◽  
Teemu Turunen-Saaresti
Keyword(s):  
High Temperature ◽  
Dynamic Modelling ◽  
Small Scale
Sign in / Sign up

Export Citation Format

Share Document