scholarly journals CSISAR--Complete System Integrated SAR.

2021 ◽  
Author(s):  
Laura Sowko ◽  
Ireena Erteza
Keyword(s):  
1999 ◽  
Vol 40 (8) ◽  
pp. 145-151 ◽  
Author(s):  
Liliana Borzacconi ◽  
Gisela Ottonello ◽  
Elena Castelló ◽  
Heber Pelaez ◽  
Augusto Gazzola ◽  
...  

The performance of a bench scale upflow sludge bed (USB) denitrifying reactor was evaluated in order to integrate it into a C and N removal system for Sanitary Landfill Leachate. The raw leachate used presented COD and NH4-N average values of 30000 mg/l and 1000 mg/l, respectively. The complete system comprises in addition an UASB reactor and a nitrifying RBC. A portion of the aerobic reactor effluent was recycled into the denitrification stage and some raw leachate was also added as an additional C source. In order to obtain operating parameters the denitrifying reactor was operated alone. Sludge from an aerobic reactor (RBC) treating raw leachate was used as inoculum. Shortly after the start up, good granulation of the sludge bed was observed. Using raw leachate and UASB outlet as carbon sources with COD/NO3-N ratios of 4 and 12, respectively, denitrification efficiencies of about 90% were reached. A sludge yield of 0.16 gVSS/gCODremoved was obtained operating with raw leachate. For the anoxic reactor operating in the complete system, denitrification efficiencies of 90% were also achieved. A nitrogen gas recycle was a successful way to avoid frequently observed sludge bed rising problems.


1975 ◽  
Vol 142 (5) ◽  
pp. 1065-1077 ◽  
Author(s):  
A.P. Osmand ◽  
R.F. Mortensen ◽  
Joan Siegel ◽  
H. Gewurz

Interactions of CRP with various substrates in the presence of human serum have been shown to result in efficient activation of C components C1-C5. We now report the ability of CRP to initiate C-dependent hemolysis. For this purpose CRP was isolated by affinity chromatography using pneumococcal CPS and gel filtration; its purity was established by several criteria. Erythrocytes were coated with CPS (E-CPS) and passively sensitized with CRP. C-dependent lysis of these cells was observed upon the addition of suitably absorbed human serum, and the efficiency of hemolysis compared favorably with that initiated by rabbit IgG anti-CPS antibody. CRP also sensitized E-CPS for lysis by guinea pig C; partial lysis was seen when C4-deficient guinea pig serum was used, suggesting that CRP also shares with antibody the ability of CRP to fully activate the C system and provide further evidence for a role for CRP similar to that of antibody in the initiation and modulation of inflammatory reactions via the complete system.


2005 ◽  
Vol 908 ◽  
Author(s):  
Gary A. Glass ◽  
Bibhudutta Rout ◽  
Alexander D. Dymnikov ◽  
Elia V. Eschenazi ◽  
Richard Greco ◽  
...  

AbstractAn overview of the present state of high energy focused ion beam (HEFIB) system technology, nanoprobe system design and specific ion beam writing applications will be presented. In particular, the combination of P-beam, heavy-ion writing and ion implantation to produce microstructures in resists and silicon will be demonstrated.Heretofore, the development of HEFIB technology worldwide has progressed through a series of developments at independent research facilities, each having relatively narrow and mostly isolated, research purposes. However, a complete, versatile HEFIB nanoprobe system capable of both analysis and modification will require the combination of several component systems, each with specialized technology, and significant advances in the design of a complete system can only be expected from an effort that includes a coordinated development of the component parts.


2008 ◽  
Vol 33-37 ◽  
pp. 919-924
Author(s):  
Chung Ming Tan ◽  
Yeau Ren Jeng ◽  
Yung Chuan Chiou

This paper employs static atomistic simulations to investigate the effect of a void on the nanoindentation of Cu(111). The simulations minimize the potential energy of the complete system via finite element formulation to identify the equilibrium configuration of any deformed state. The size and depth of the void are treated as two variable parameters. The numerical results reveal that the void disappears when the indentation depth is sufficiently large. A stress concentration is observed at the internal surface of the void in all simulations cases. The results indicate that the presence of a void has a significant influence on the nanohardness extracted from the nanoindentation tests.


1806 ◽  
Vol 96 ◽  
pp. 239-266

A fore-knowledge of the wind and weather is an object so very interesting to all classes of men, and the changes in the mercurial barometer affording the means which appear most conducive to it, a system that should with certainty explain the connection between the variations of the mercury and those in the atmosphere under all circumstances, becomes greatly desirable; to seamen, more especially, whose safety and success depend so much upon being duly prepared for changes of wind, and the approaching storm, it would be an acquisition of the first importance: in a more extended view, I may say, that the patriot and the philanthropist must join with the philosopher and the mariner in desiring its comple­tion. So long and widely-extended a course of observation, however, seems requisite to form even a basis for it, that a complete system is rather the object of anxious hope than of reasonable expectation. Much has been done towards it, but so much appears to remain, that any addition to the common stock, however small, or though devoid of philosophical accuracy, I have thought would be received by the learned with candour. With this prepossession, I venture to submit to them some observations upon the movement and state of the mercury upon the coasts of New Holland and New South Wales, the Terra Australis, or Australia, of the earlier charts.


1955 ◽  
Vol 59 (537) ◽  
pp. 587-603
Author(s):  
R. H. Woodall

The main task of the aircraft accessory designer is to provide fully developed and type-tested equipment to meet the needs of the Aircraft Industry at the time when a new aircraft is at a stage in construction where accessories are to be fitted.But he must do more than this, particularly with equipment for multi-engined aircraft. He must endeavour to set up and test a complete aircraft ancillary power system. This is particularly important for the electrical system, where two or more generators have to operate in parallel, successfully sharing the load on the system and providing over-voltage and other protection in such a manner that failure of the complete system does not result from failure of one engine, generator or its attendant equipment.


Sign in / Sign up

Export Citation Format

Share Document