scholarly journals Spent Fuel Test-Climax: An evaluation of the technical feasibility of geologic storage of spent nuclear fuel in granite: Final report

10.2172/60112 ◽  
1986 ◽  
Author(s):  
W.C. Patrick
Keyword(s):  
Nuclear Fuel ◽  
Spent Nuclear Fuel ◽  
Final Report ◽  
Spent Fuel ◽  
Technical Feasibility ◽  
Geologic Storage

Chemical Effects at the Reaction Front in Corroding Spent Nuclear Fuel

2006 ◽  
Vol 985 ◽  
Author(s):  
Jeffrey A. Fortner ◽  
A. Jeremy Kropf ◽  
James L. Jerden ◽  
James C. Cunnane
Keyword(s):  
Transition Zone ◽  
Nuclear Fuel ◽  
Spent Nuclear Fuel ◽  
Aqueous Environment ◽  
Spent Fuel ◽  
Aqueous Corrosion ◽  
Reduction Potentials ◽  
Chemical Effects ◽  
Before And After ◽  
X Ray Absorption

AbstractPerformance assessment models of the U. S. repository at Yucca Mountain, Nevada suggest that neptunium from spent nuclear fuel is a potentially important dose contributor. A scientific understanding of how the UO2 matrix of spent nuclear fuel impacts the oxidative dissolution and reductive precipitation of Np is needed to predict the behavior of Np at the fuel surface during aqueous corrosion. Neptunium would most likely be transported as aqueous Np(V) species, but for this to occur it must first be oxidized from the Np(IV) state found within the parent spent nuclear fuel. In this paper we present synchrotron x-ray absorption spectroscopy and microscopy findings that illuminate the resultant local chemistry of neptunium and plutonium within uranium oxide spent nuclear fuel before and after corrosive alteration in an air-saturated aqueous environment. We find the Pu and Np in unaltered spent fuel to have a +4 oxidation state and an environment consistent with solid-solution in the UO2 matrix. During corrosion in an air-saturated aqueous environment, the uranium matrix is converted to uranyl (UO22+) mineral assemblage that is depleted in Np and Pu relative to the parent fuel. The transition from U(IV) in the fuel to a fully U(VI) character across the corrosion front is not sharp, but occurs over a transition zone of ∼ 50 micrometers. We find evidence of a thin (∼ 20 micrometer) layer that is enriched in Pu and Np within a predominantly U(IV) environment on the fuel side of the transition zone. These experimental observations are consistent with available data for the standard reduction potentials for NpO2+/Np4+ and UO22+/U4+ couples, which indicate that Np(IV) may not be effectively oxidized to Np(V) at the corrosion potential of uranium dioxide spent nuclear fuel in air-saturated aqueous solutions.

scholarly journals The Need for Integrating the Back End of the Nuclear Fuel Cycle in the United States of America

MRS Advances ◽  
2018 ◽  
Vol 3 (19) ◽  
pp. 991-1003 ◽  
Author(s):  
Evaristo J. Bonano ◽  
Elena A. Kalinina ◽  
Peter N. Swift
Keyword(s):  
United States ◽  
Nuclear Fuel ◽  
United States Of America ◽  
Spent Nuclear Fuel ◽  
Fuel Cycle ◽  
Nuclear Fuel Cycle ◽  
The United States ◽  
Spent Fuel ◽  
Dry Storage ◽  
The Us

ABSTRACTCurrent practice for commercial spent nuclear fuel management in the United States of America (US) includes storage of spent fuel in both pools and dry storage cask systems at nuclear power plants. Most storage pools are filled to their operational capacity, and management of the approximately 2,200 metric tons of spent fuel newly discharged each year requires transferring older and cooler fuel from pools into dry storage. In the absence of a repository that can accept spent fuel for permanent disposal, projections indicate that the US will have approximately 134,000 metric tons of spent fuel in dry storage by mid-century when the last plants in the current reactor fleet are decommissioned. Current designs for storage systems rely on large dual-purpose (storage and transportation) canisters that are not optimized for disposal. Various options exist in the US for improving integration of management practices across the entire back end of the nuclear fuel cycle.

scholarly journals Gap Analysis to Guide DOE R&D in Supporting Extended Storage and Transportation of Spent Nuclear Fuel: An FY2019 Assessment (Final Report)

2019 ◽  
Author(s):  
Melissa Christine Teague ◽  
Sylvia J. Saltzstein ◽  
Brady Hanson ◽  
Ken B. Sorenson ◽  
Geoffrey A. Freeze
Keyword(s):  
Nuclear Fuel ◽  
Spent Nuclear Fuel ◽  
Gap Analysis ◽  
Final Report

Burnup Credit in the Criticality Safety Analysis of Spent Fuel in Storage Systems

2014 ◽  
Author(s):  
Vladyslav Soloviov
Keyword(s):  
Isotopic Composition ◽  
Nuclear Fuel ◽  
Beta Decay ◽  
Spent Nuclear Fuel ◽  
Storage Systems ◽  
Multiplication Factor ◽  
Spent Fuel ◽  
Neutron Multiplication ◽  
Initial Fuel ◽  
Effective Neutron

In this paper accounting of spent nuclear fuel (SNF) burnup of RBMK-1000 with actinides and full isotopic composition has been performed. The following characteristics were analyzed: initial fuel enrichment, burnup fraction, axial burnup profile in the fuel assembly (FA) and fuel weight. As the results show, in the first 400 hours after stopping the reactor, there is an increase in the effective neutron multiplication factor (keff) due to beta decay of 239Np into 239Pu. Further, from 5 to 50 years, there is a decrease in keff due to beta decay of 241Pu into 241Am. Beyond 50 years there is a slight change in the criticality of the system. Accounting for nuclear fuel burnup in the justification of nuclear safety of SNF systems will provide an opportunity to increase the volume of loaded fuel and thus significantly reduce technology costs of handling of SNF.

Developing a Concept for a National Used Fuel Interim Storage Facility in the United States

2013 ◽  
Author(s):  
Donald Wayne Lewis
Keyword(s):  
United States ◽  
Nuclear Fuel ◽  
Nuclear Waste ◽  
Spent Nuclear Fuel ◽  
The United States ◽  
Yucca Mountain ◽  
Storage Facility ◽  
Spent Fuel ◽  
Geological Repository ◽  
Interim Storage

In the United States (U.S.) the nuclear waste issue has plagued the nuclear industry for decades. Originally, spent fuel was to be reprocessed but with the threat of nuclear proliferation, spent fuel reprocessing has been eliminated, at least for now. In 1983, the Nuclear Waste Policy Act of 1982 [1] was established, authorizing development of one or more spent fuel and high-level nuclear waste geological repositories and a consolidated national storage facility, called a “Monitored Retrievable Storage” facility, that could store the spent nuclear fuel until it could be placed into the geological repository. Plans were under way to build a geological repository, Yucca Mountain, but with the decision by President Obama to terminate the development of Yucca Mountain, a consolidated national storage facility that can store spent fuel for an interim period until a new repository is established has become very important. Since reactor sites have not been able to wait for the government to come up with a storage or disposal location, spent fuel remains in wet or dry storage at each nuclear plant. The purpose of this paper is to present a concept developed to address the DOE’s goals stated above. This concept was developed over the past few months by collaboration between the DOE and industry experts that have experience in designing spent nuclear fuel facilities. The paper examines the current spent fuel storage conditions at shutdown reactor sites, operating reactor sites, and the type of storage systems (transportable versus non-transportable, welded or bolted). The concept lays out the basis for a pilot storage facility to house spent fuel from shutdown reactor sites and then how the pilot facility can be enlarged to a larger full scale consolidated interim storage facility.

Centralization of Canada’s Spent Nuclear Fuel

2013 ◽  
Author(s):  
Krista Nicholson ◽  
John McDonald ◽  
Shona Draper ◽  
Brian M. Ikeda ◽  
Igor Pioro
Keyword(s):  
Nuclear Fuel ◽  
Site Selection ◽  
Nuclear Power ◽  
Power Plants ◽  
Spent Nuclear Fuel ◽  
Selection Process ◽  
Spent Fuel ◽  
Geologic Repository ◽  
Candu Reactors ◽  
High Level

Currently in Canada, spent fuel produced from Nuclear Power Plants (NPPs) is in the interim storage all across the country. It is Canada’s long-term strategy to have a national geologic repository for the disposal of spent nuclear fuel for CANada Deuterium Uranium (CANDU) reactors. The initial problem is to identify a means to centralize Canada’s spent nuclear fuel. The objective of this paper is to present a solution for the transportation issues that surround centralizing the waste. This paper reviews three major components of managing and the transporting of high-level nuclear waste: 1) site selection, 2) containment and 3) the proposed transportation method. The site has been selected based upon several factors including proximity to railways and highways. These factors play an important role in the site-selection process since the location must be accessible and ideally to be far from communities. For the containment of the spent fuel during transportation, a copper-shell container with a steel structural infrastructure was selected based on good thermal, structural, and corrosion resistance properties has been designed. Rail has been selected as the method of transporting the container due to both the potential to accommodate several containers at once and the extensive railway system in Canada.

scholarly journals An Automated SeaFAST ICP-DRC-MS Method for the Determination of 90Sr in Spent Nuclear Fuel Leachates

Molecules ◽  
2020 ◽  
Vol 25 (6) ◽  
pp. 1429 ◽  
Author(s):  
Víctor Vicente Vilas ◽  
Sylvain Millet ◽  
Miguel Sandow ◽  
Luis Iglesias Pérez ◽  
Daniel Serrano-Purroy ◽  
...  
Keyword(s):  
Nuclear Fuel ◽  
Safety Assessment ◽  
Analytical Approach ◽  
Source Term ◽  
Spent Nuclear Fuel ◽  
Spent Fuel ◽  
Chemical Purification ◽  
Radiochemical Method ◽  
Good Agreement

To reduce uncertainties in determining the source term and evolving condition of spent nuclear fuel is fundamental to the safety assessment. ß-emitting nuclides pose a challenging task for reliable, quantitative determination because both radiometric and mass spectrometric methodologies require prior chemical purification for the removal of interfering activity and isobars, respectively. A method for the determination of 90Sr at trace levels in nuclear spent fuel leachate samples without sophisticated and time-consuming procedures has been established. The analytical approach uses a commercially available automated pre-concentration device (SeaFAST) coupled to an ICP-DRC-MS. The method shows good performances with regard to reproducibility, precision, and LOD reducing the total time of analysis for each sample to 12.5 min. The comparison between the developed method and the classical radiochemical method shows a good agreement when taking into account the associated uncertainties.

scholarly journals Identification of a Stable Hydrogen-Driven Microbiome in a Highly Radioactive Storage Facility on the Sellafield Site

2020 ◽  
Vol 11 ◽  
Author(s):  
Sharon Ruiz-Lopez ◽  
Lynn Foster ◽  
Chris Boothman ◽  
Nick Cole ◽  
Katherine Morris ◽  
...  
Keyword(s):  
16S Rrna ◽  
Microbial Communities ◽  
Nuclear Fuel ◽  
Spent Nuclear Fuel ◽  
Quantitative Polymerase Chain Reaction ◽  
16S Rrna Genes ◽  
Rrna Genes ◽  
Rrna Gene ◽  
Bacterial Cells ◽  
Spent Fuel

The use of nuclear power has been a significant part of the United Kingdom’s energy portfolio with the Sellafield site being used for power production and more recently reprocessing and decommissioning of spent nuclear fuel activities. Before being reprocessed, spent nuclear fuel is stored in water ponds with significant levels of background radioactivity and in high alkalinity (to minimize fuel corrosion). Despite these challenging conditions, the presence of microbial communities has been detected. To gain further insight into the microbial communities present in extreme environments, an indoor, hyper-alkaline, oligotrophic, and radioactive spent fuel storage pond (INP) located on the Sellafield site was analyzed. Water samples were collected from sample points within the INP complex, and also the purge water feeding tank (FT) that supplies water to the pond, and were screened for the presence of the 16S and 18S rRNA genes to inform sequencing requirements over a period of 30 months. Only 16S rRNA genes were successfully amplified for sequencing, suggesting that the microbial communities in the INP were dominated by prokaryotes. Quantitative Polymerase Chain Reaction (qPCR) analysis targeting 16S rRNA genes suggested that bacterial cells in the order of 104–106 mL–1 were present in the samples, with loadings rising with time. Next generation Illumina MiSeq sequencing was performed to identify the dominant microorganisms at eight sampling times. The 16S rRNA gene sequence analysis suggested that 70% and 91% from of the OTUs samples, from the FT and INP respectively, belonged to the phylum Proteobacteria, mainly from the alpha and beta subclasses. The remaining OTUs were assigned primarily to the phyla Acidobacteria, Bacteroidetes, and, Cyanobacteria. Overall the most abundant genera identified were Hydrogenophaga, Curvibacter, Porphyrobacter, Rhodoferax, Polaromonas, Sediminibacterium, Roseococcus, and Sphingomonas. The presence of organisms most closely related to Hydrogenophaga species in the INP areas, suggests the metabolism of hydrogen as an energy source, most likely linked to hydrolysis of water caused by the stored fuel. Isolation of axenic cultures using a range of minimal and rich media was also attempted, but only relatively minor components (from the phylum Bacteroidetes) of the pond water communities were obtained, emphasizing the importance of DNA-based, not culture-dependent techniques, for assessing the microbiome of nuclear facilities.

Sign in / Sign up

Export Citation Format

Share Document