Sucrose Acetate Isobutyrate as an In situ Forming Implant for Sustained Release of Local Anesthetics

2019 ◽  
Vol 16 (4) ◽  
pp. 331-340
Author(s):  
Hanmei Li ◽  
Yuling Xu ◽  
Yuna Tong ◽  
Yin Dan ◽  
Tingting Zhou ◽  
...  
Keyword(s):  
Drug Delivery ◽  
Sustained Release ◽  
Local Anesthetics ◽  
Subcutaneous Injection ◽  
In Vitro Release ◽  
Pharmacokinetic Analysis ◽  
Burst Release

Objective: In this study, an injectable Sucrose Acetate Isobutyrate (SAIB) drug delivery system (SADS) was designed and fabricated for the sustained release of Ropivacaine (RP) to prolong the duration of local anesthesia. Methods: By mixing SAIB, RP, and N-methyl-2-pyrrolidone, the SADS was prepared in a sol state with low viscosity before injection. After subcutaneous injection, the pre-gel solution underwent gelation in situ to form a drug-released depot. Result: The in vitro release profiles and in vivo pharmacokinetic analysis indicated that RP-SADS had suitable controlled release properties. Particularly, the RP-SADS significantly reduced the initial burst release after subcutaneous injection in rats. Conclusion: In a pharmacodynamic analysis of rats, the duration of nerve blockade was prolonged by over 3-fold for the RP-SADS formulation compared to RP solution. Additionally, RP-SADS showed good biocompatibility in vitro and in vivo. Thus, the SADS-based depot technology is a safe drug delivery strategy for the sustained release of local anesthetics with long-term analgesia effects.

scholarly journals Development of In Situ Self-Assembly Nanoparticles to Encapsulate Lopinavir and Ritonavir for Long-Acting Subcutaneous Injection

Pharmaceutics ◽  
2021 ◽  
Vol 13 (6) ◽  
pp. 904
Author(s):  
Irin Tanaudommongkon ◽  
Asama Tanaudommongkon ◽  
Xiaowei Dong
Keyword(s):  
Sustained Release ◽  
Trough Concentration ◽  
Self Assembly ◽  
Subcutaneous Injection ◽  
Drug Loading ◽  
Entrapment Efficiency ◽  
Long Acting

Most antiretroviral medications for human immunodeficiency virus treatment and prevention require high levels of patient adherence, such that medications need to be administered daily without missing doses. Here, a long-acting subcutaneous injection of lopinavir (LPV) in combination with ritonavir (RTV) using in situ self-assembly nanoparticles (ISNPs) was developed to potentially overcome adherence barriers. The ISNP approach can improve the pharmacokinetic profiles of the drugs. The ISNPs were characterized in terms of particle size, drug entrapment efficiency, drug loading, in vitro release study, and in vivo pharmacokinetic study. LPV/RTV ISNPs were 167.8 nm in size, with a polydispersity index of less than 0.35. The entrapment efficiency was over 98% for both LPV and RTV, with drug loadings of 25% LPV and 6.3% RTV. A slow release rate of LPV was observed at about 20% on day 5, followed by a sustained release beyond 14 days. RTV released faster than LPV in the first 5 days and slower than LPV thereafter. LPV trough concentration remained above 160 ng/mL and RTV trough concentration was above 50 ng/mL after 6 days with one subcutaneous injection. Overall, the ISNP-based LPV/RTV injection showed sustained release profiles in both in vitro and in vivo studies.

Understanding the burst release phenomenon: toward designing effective nanoparticulate drug-delivery systems

2020 ◽  
pp. 00-00
Author(s):  
Sourav Bhattacharjee
Keyword(s):  
Drug Delivery ◽  
Sustained Release ◽  
Mathematical Models ◽  
Drug Delivery Systems ◽  
Release Kinetics ◽  
Burst Release ◽  
Future Directions ◽  
Short Period

Burst release of encapsulated drug with release of a significant fraction of payload into release medium within a short period, both in vitro and in vivo, remains a challenge for translation. Such unpredictable and uncontrolled release is often undesirable, especially from the perspective of developing sustained-release formulations. Moreover, a brisk release of the payload upsets optimal release kinetics. This account strives toward understanding burst release noticed in nanocarriers and investigates its causes. Various mathematical models to explain such untimely release were also examined, including their strengths and weaknesses. Finally, the account revisits current techniques of limiting burst release from nanocarriers and prioritizes future directions that harbor potential of fruitful translation by reducing such occurrences.

Formulation and Evaluation of Itopride Hydrochloride Floating Beads for Gastroretentive Delivery

2013 ◽  
Vol 6 (4) ◽  
pp. 2269-2280
Author(s):  
Nagratna Dhople ◽  
P N Dandag ◽  
A P Gadad ◽  
C K Pandey ◽  
Masthiholimath V S
Keyword(s):  
Sustained Release ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Sustained Release Formulation ◽  
Prokinetic Drug ◽  
Drug Entrapment Efficiency ◽  
Itopride Hydrochloride ◽  
Vitro Release

A gastroretentive sustained release system of itopride hydrochloride was formulated to increase the gastric residence time and modulate its release behavior. Itopride hydrochloride is a prokinetic drug used in the treatment of gastroeosophageal reflux disease, Non-ulcer dyspepsia and as an antiemetic. Hence, itopride hydrochloride beads were prepared by emulsion gelation method by employing low methoxy pectin and sodium alginate as sustained release polymers in three different ratios alone and in combination and sunflower oil was used to enable floating property to the beads. The effect of variation in polymer and their concentration was investigated. The beads were evaluated for production yield, particle size, swelling index, density measurement, buoyancy, drug content, drug entrapment efficiency, in vitro release characteristics and release kinetic study. Based on drug entrapment efficiency, buoyancy, swelling and in vitro release, F9 was selected as the optimized formulation. F9 was further subjected to surface morphology by SEM, in vitro release comparison with marketed formulation, in vivo floating study in rabbits and stability study for 90 days. In vitro release follows zero order and fitted in Korsmeyer peppas model (Non-Fickian release). Therefore, the rate of drug release is due to the combined effect of drug diffusion and polymer swelling. The in vivo X-ray studies revealed that the beads were floating in the rabbit stomach up to 10 hours. Thus, it was concluded that the sustained release formulation containing itopride hydrochloride was found to improve patient compliance, minimize the side effects and decrease the frequency of administration.

Formulation and Evaluation of Atorvastatin Calcium-Poly-ε-Caprolactone Nanoparticles Loaded Ocular Inserts for Sustained Release and Antiinflammatory Efficacy

2020 ◽  
Vol 21 (15) ◽  
pp. 1688-1698
Author(s):  
Germeen N.S. Girgis
Keyword(s):  
Sustained Release ◽  
In Vitro Release ◽  
Pluronic F127 ◽  
In Vivo Study ◽  
Average Weight ◽  
Drug Release Profile ◽  
Atorvastatin Calcium ◽  
Anti Inflammatory

Purpose: The work was performed to investigate the feasibility of preparing ocular inserts loaded with Poly-ε-Caprolactone (PCL) nanoparticles as a sustained ocular delivery system. Methods: First, Atorvastatin Calcium-Poly-ε-Caprolactone (ATC-PCL) nanoparticles were prepared and characterized. Then, the optimized nanoparticles were loaded within inserts formulated with Methylcellulose (MC) and Polyvinyl Alcohol (PVA) by a solvent casting technique and evaluated physically, for in-vitro drug release profile. Finally, an in-vivo study was performed on the selected formulation to prove non-irritability and sustained ocular anti-inflammatory efficacy compared with free drug-loaded ocuserts. Results: The results revealed (ATC-PCL) nanoparticles prepared with 0.5% pluronic F127 were optimized with 181.72±3.6 nm particle size, 0.12±0.02 (PDI) analysis, -27.4± 0.69 mV zeta potential and 62.41%±4.7% entrapment efficiency. Nanoparticles loaded ocuserts manifested compatibility between drug and formulation polymers. Moreover, formulations complied with average weight 0.055±0.002 to 0.143±0.023 mg, and accepted pH. ATC-PCL nanoparticles loaded inserts prepared by 5% MC showed more sustained, prolonged in-vitro release over 24h. In-vivo study emphasized non-irritability, ocular anti-inflammatory effectiveness represented by smaller lid closure scores, and statistically significant lowering in PMN count after 3h. Conclusion: These findings proposed a possibly simple, new and affordable price technique to prepare promising (ATC-PCL) nanoparticles loaded inserts to achieve sustained release with prolonged antiinflammatory efficacy.

In Vitro and In Vivo Drug Release from a Novel In Situ Forming Drug Delivery System

2007 ◽  
Vol 25 (6) ◽  
pp. 1347-1354 ◽  
Author(s):  
Heiko Kranz ◽  
Erol Yilmaz ◽  
Gayle A. Brazeau ◽  
Roland Bodmeier
Keyword(s):  
Drug Delivery ◽  
Drug Release ◽  
Drug Delivery System ◽  
Delivery System ◽  
In Situ Forming

scholarly journals Development and characterization of phytosterol nanoemulsions and self-microemulsifying drug delivery systems

2019 ◽  
Author(s):  
Yuan Chuanxun ◽  
Zhang Xueru ◽  
Jin Risheng
Keyword(s):  
Drug Delivery ◽  
Delivery System ◽  
Drug Loading ◽  
In Vitro Release ◽  
Pharmacokinetic Analysis ◽  
Polyethylene Glycol 400 ◽  
Hydrogenated Castor Oil ◽  
Release Curve ◽  
Tween 60

AbstractThe aim of this study is to develop a self microemulsion drug delivery system for phytosterols to improve the solubility and bioavailability. The results showed that the formulation of phytosterol self-microemulsion is: lemon essential oil in oil phase, polyoxyethylene hydrogenated castor oil 40 and Tween 60 in emulsifier, polyethylene glycol 400 in co-emulsifier, Km = 7:3, Kp = 3:1, Ke = 50%. The drug loading of phytosterol self-microemulsion prepared by this method was 87.22 mg/g, encapsulation efficiency was 89.65%, particle size was 48.85nm, potential was −12.863mV. In vitro release experiment showed that the release of phytosterols in microemulsion was more than 90%, and the release curve was in accordance with the first-order kinetics equation. The pharmacokinetic analysis of PSSM synthesized by this method shows that PSSM can increase the bioavailability of PS more than three times, so it is necessary to do more in-depth research on the self-microemulsion delivery system of phytosterols.

scholarly journals Development of Piperine-Loaded Solid Self-Nanoemulsifying Drug Delivery System: Optimization, In-Vitro, Ex-Vivo, and In-Vivo Evaluation

Nanomaterials ◽  
2021 ◽  
Vol 11 (11) ◽  
pp. 2920
Author(s):  
Ameeduzzafar Zafar ◽  
Syed Sarim Imam ◽  
Nabil K. Alruwaili ◽  
Omar Awad Alsaidan ◽  
Mohammed H. Elkomy ◽  
...  
Keyword(s):  
Drug Delivery ◽  
Drug Delivery System ◽  
Delivery System ◽  
Oral Delivery ◽  
Ex Vivo ◽  
In Vitro Release ◽  
System Optimization ◽  
Globule Size

Hypertension is a cardiovascular disease that needs long-term medication. Oral delivery is the most common route for the administration of drugs. The present research is to develop piperine self-nanoemulsifying drug delivery system (PE-SNEDDS) using glyceryl monolinoleate (GML), poloxamer 188, and transcutol HP as oil, surfactant, and co-surfactant, respectively. The formulation was optimized by three-factor, three-level Box-Behnken design. PE-SNEDDs were characterized for globule size, emulsification time, stability, in-vitro release, and ex-vivo intestinal permeation study. The optimized PE-SNEDDS (OF3) showed the globule size of 70.34 ± 3.27 nm, percentage transmittance of 99.02 ± 2.02%, and emulsification time of 53 ± 2 s Finally, the formulation OF3 was transformed into solid PE-SNEDDS (S-PE-SNEDDS) using avicel PH-101 as adsorbent. The reconstituted SOF3 showed a globule size of 73.56 ± 3.54 nm, PDI of 0.35 ± 0.03, and zeta potential of −28.12 ± 2.54 mV. SEM image exhibited the PE-SNEDDS completely adsorbed on avicel. Thermal analysis showed the drug was solubilized in oil, surfactant, and co-surfactant. S-PE-SNEDDS formulation showed a more significant (p < 0.05) release (97.87 ± 4.89% in 1 h) than pure PE (27.87 ± 2.65% in 1 h). It also exhibited better antimicrobial activity against S. aureus and P. aeruginosa and antioxidant activity as compared to PE dispersion. The in vivo activity in rats exhibited better (p < 0.05) antihypertensive activity as well as 4.92-fold higher relative bioavailability than pure PE dispersion. Finally, from the results it can be concluded that S-PE-SNEDDS might be a better approach for the oral delivery to improve the absorption and therapeutic activity.

scholarly journals Thermosensitive Chitosan Hydrogels Containing Polymeric Microspheres for Vaginal Drug Delivery

2017 ◽  
Vol 2017 ◽  
pp. 1-12 ◽  
Author(s):  
Ting-Ting Yang ◽  
Yuan-Zheng Cheng ◽  
Meng Qin ◽  
Yong-Hong Wang ◽  
Hong-Li Yu ◽  
...  
Keyword(s):  
Drug Delivery ◽  
Sustained Release ◽  
Delivery System ◽  
Drug Loading ◽  
Great Promise ◽  
Burst Release ◽  
Bletilla Striata ◽  
Vaginal Drug Delivery ◽  
Thermosensitive Hydrogels

Thermosensitive hydrogels have increasingly received considerable attention for local drug delivery based on many advantages. However, burst release of drugs is becoming a critical challenge when the hydrogels are employed. Microspheres- (MS-) loaded thermosensitive hydrogels were thus fabricated to address this limitation. Employing an orthogonal design, the spray-dried operations of tenofovir (TFV)/Bletilla striata polysaccharide (BSP)/chitosan (CTS) MS were optimized according to the drug loading (DL). The physicochemical properties of the optimal MS (MS F) were characterized. Depending on the gelation temperature and gelating time, the optimal CTS-sodium alginate- (SA-) α,β-glycerophosphate (GP) (CTS-SA-GP) hydrogel was obtained. Observed by scanning electron microscope (SEM), TFV/BSP/CTS MS were successfully encapsulated in CTS-SA-GP. In vitro releasing demonstrated that MS F-CTS-SA-GP retained desirable in vitro sustained-release characteristics as a vaginal delivery system. Bioadhesion measurement showed that MS-CTS-SA-GP exhibited the highest mucoadhesive strength. Collectively, MS-CTS-SA-GP holds great promise for topical applications as a sustained-release vaginal drug delivery system.

Sign in / Sign up

Export Citation Format

Share Document