scholarly journals Thermosensitive Chitosan Hydrogels Containing Polymeric Microspheres for Vaginal Drug Delivery

2017 ◽  
Vol 2017 ◽  
pp. 1-12 ◽  
Author(s):  
Ting-Ting Yang ◽  
Yuan-Zheng Cheng ◽  
Meng Qin ◽  
Yong-Hong Wang ◽  
Hong-Li Yu ◽  
...  
Keyword(s):  
Drug Delivery ◽  
Sustained Release ◽  
Delivery System ◽  
Drug Loading ◽  
Great Promise ◽  
Burst Release ◽  
Bletilla Striata ◽  
Vaginal Drug Delivery ◽  
Thermosensitive Hydrogels

Thermosensitive hydrogels have increasingly received considerable attention for local drug delivery based on many advantages. However, burst release of drugs is becoming a critical challenge when the hydrogels are employed. Microspheres- (MS-) loaded thermosensitive hydrogels were thus fabricated to address this limitation. Employing an orthogonal design, the spray-dried operations of tenofovir (TFV)/Bletilla striata polysaccharide (BSP)/chitosan (CTS) MS were optimized according to the drug loading (DL). The physicochemical properties of the optimal MS (MS F) were characterized. Depending on the gelation temperature and gelating time, the optimal CTS-sodium alginate- (SA-) α,β-glycerophosphate (GP) (CTS-SA-GP) hydrogel was obtained. Observed by scanning electron microscope (SEM), TFV/BSP/CTS MS were successfully encapsulated in CTS-SA-GP. In vitro releasing demonstrated that MS F-CTS-SA-GP retained desirable in vitro sustained-release characteristics as a vaginal delivery system. Bioadhesion measurement showed that MS-CTS-SA-GP exhibited the highest mucoadhesive strength. Collectively, MS-CTS-SA-GP holds great promise for topical applications as a sustained-release vaginal drug delivery system.

Bentonite nanoclay-based drug-delivery systems for treating melanoma

Clay Minerals ◽  
2018 ◽  
Vol 53 (1) ◽  
pp. 53-63 ◽  
Author(s):  
Faezeh Hosseini ◽  
Farzaneh Hosseini ◽  
Seyyed Mehdi Jafari ◽  
Azade Taheri
Keyword(s):  
Drug Delivery ◽  
Sustained Release ◽  
Drug Delivery System ◽  
Delivery System ◽  
Drug Delivery Systems ◽  
Delivery Systems ◽  
Burst Release ◽  
Normal Tissues ◽  
Release Pattern

ABSTRACTLocal chemotherapy with biocompatible drug-delivery systems prolongs survival in patients. Due to the biocompatibility and high loading capacity, bentonite nanoclay is a good candidate for the fabrication of drug-delivery vehicles. In this study, doxorubicin-bentonite nanoclay complex (DOX-Bent complex) was prepared for the first time as a sustained-release drug-delivery system for intratumoural chemotherapy of melanoma. An efficient loading of DOX on 1 mg of bentonite nanoclay as high as 994.45 ± 4.9 µg was obtained at a 30:1 DOX:bentonite nanoclay mass ratio. The DOX-Bent complex showed a low initial burst release of DOX in the first 24 h of release, followed by a sustained-release pattern for 21 days. The cumulativein vitrorelease of DOX from the DOX-Bent complex at pHs 6.5 and 7.4 revealed that the DOX-Bent complex can distinguish between tumour and normal tissues and express specific drug release at the tumour site. The results of cytotoxicity experiments indicated that the release pattern of DOX can supply sufficient DOX to inhibit growth of the melanoma cancer cell with an IC50 of 0.29 ± 0.07 µg/mL. It is thus suggested that the DOX-Bent complex be introduced as a drug-delivery system for effective local cancer therapy.

scholarly journals Applicability of Gum Karaya in the Preparation and in Vitro Evaluation of Losartan Potassium as Chronotherapeutic Drug Delivery System

2015 ◽  
Vol 7 (1-2) ◽  
pp. 65-74
Author(s):  
K. Latha ◽  
V. V. Srikanth ◽  
S. A. Sunil ◽  
N. R. Srinivasa ◽  
M. U. Uhumwangho ◽  
...  
Keyword(s):  
Drug Delivery ◽  
Tensile Strength ◽  
Drug Delivery System ◽  
Delivery System ◽  
Lag Time ◽  
Losartan Potassium ◽  
In Vitro Dissolution ◽  
Burst Release ◽  
Gum Karaya

The objective of this investigation is to study the applicability of gum karaya, the natural gum for the preparation and in vitro evaluation of losartan potassium, as Chronotherapeutic Drug Delivery System (ChDDS). The compression-coated timed-release tablets (CCT) containing losartan potassium in the core tablet were prepared by dry coating technique with different ratios of gum karaya as the outer coat. The parameters investigated were tensile strength, friability, in vitro dissolution studies and drug concentration. The optimized formulation was further characterized by powder XRD and FTIR to investigate interactions and no interactions observed. The tensile strength and friability of all the CCT were between 1.06-1.23 MN/m2 and < 0.3% respectively.  All the CCT showed a clear lag time before a burst release of drug. However, the lag time of drug release increased as the amount of gum karaya in the outer layer increased. For instance, the lag time of LGK1, LGK2, LGK3, LGK4, LGK5, LGK6 and LGK7 were 16, 10.5, 5.5, 3, 2, 1.5 and 0.5 hrs respectively.  The drug content of all the CCT was >98%. Formulation LGK3 was taken as an optimized formulation which can be exploited to achieve ChDDS of losartan potassium for the treatment of hypertension. 

Multivesicular liposome: A lipid-based drug delivery system for efficient drug delivery

2021 ◽  
Vol 27 ◽  
Author(s):  
Bapi Gorain ◽  
Bandar E. Al-Dhubiab ◽  
Anroop Nair ◽  
Prashant Kesharwani ◽  
Manisha Pandey ◽  
...  
Keyword(s):  
Drug Delivery ◽  
Sustained Release ◽  
Delivery System ◽  
Targeted Delivery ◽  
Drug Loading ◽  
Therapeutic Agents ◽  
Laboratory Research ◽  
Efficacy And Safety ◽  
Liposomal Delivery ◽  
Proteins And Peptides

: The advancement of delivery tools for therapeutic agents has brought several novel formulations with increased drug loading, sustained release, targeted delivery, and prolonged efficacy. Amongst the several novel delivery approaches, multivesicular liposome has gained potential interest because this delivery system possesses the above advantages. In addition, this multivesicular liposomal delivery prevents degradation of the entrapped drug within the physiological environment while administered. The special structure of the vesicles allowed successful entrapment of hydrophobic and hydrophilic therapeutic agents, including proteins and peptides. Furthermore, this novel formulation could maintain the desired drug concentration in the plasma for a prolonged period, which helps to reduce the dosing frequencies, improve bioavailability, and safety. This tool could also provide stability of the formulation, and finally gaining patient compliance. Several multivesicular liposomes received approval for clinical research, while others are at different stages of laboratory research. In this review, we have focused on the preparation of multivesicular liposomes along with their application in different ailments for the improvement of the performance of the entrapped drug. Moreover, the challenges of delivering multivesicular vesicles have also been emphasized. Overall, it could be inferred that multivesicular liposomal delivery is a novel platform of advanced drug delivery with improved efficacy and safety.

scholarly journals Development and characterization of phytosterol nanoemulsions and self-microemulsifying drug delivery systems

2019 ◽  
Author(s):  
Yuan Chuanxun ◽  
Zhang Xueru ◽  
Jin Risheng
Keyword(s):  
Drug Delivery ◽  
Delivery System ◽  
Drug Loading ◽  
In Vitro Release ◽  
Pharmacokinetic Analysis ◽  
Polyethylene Glycol 400 ◽  
Hydrogenated Castor Oil ◽  
Release Curve ◽  
Tween 60

AbstractThe aim of this study is to develop a self microemulsion drug delivery system for phytosterols to improve the solubility and bioavailability. The results showed that the formulation of phytosterol self-microemulsion is: lemon essential oil in oil phase, polyoxyethylene hydrogenated castor oil 40 and Tween 60 in emulsifier, polyethylene glycol 400 in co-emulsifier, Km = 7:3, Kp = 3:1, Ke = 50%. The drug loading of phytosterol self-microemulsion prepared by this method was 87.22 mg/g, encapsulation efficiency was 89.65%, particle size was 48.85nm, potential was −12.863mV. In vitro release experiment showed that the release of phytosterols in microemulsion was more than 90%, and the release curve was in accordance with the first-order kinetics equation. The pharmacokinetic analysis of PSSM synthesized by this method shows that PSSM can increase the bioavailability of PS more than three times, so it is necessary to do more in-depth research on the self-microemulsion delivery system of phytosterols.

A Smart Drug Delivery System Based on Thermo-Responsive Polymer Gated Au NRs@SiO2 Nano-Platform

2021 ◽  
Vol 16 (7) ◽  
pp. 1029-1036
Author(s):  
Hongzhu Wang ◽  
Mengxun Chen ◽  
Liping Song ◽  
Youju Huang
Keyword(s):  
Drug Delivery ◽  
Block Copolymer ◽  
Drug Release ◽  
Drug Delivery System ◽  
Delivery System ◽  
Photothermal Therapy ◽  
Drug Loading ◽  
Temperature Sensitive

A key challenge for nanoparticles-based drug delivery system is to achieve manageable drug release in tumour cell. In this study, a versatile system combining photothermal therapy and controllable drug release for tumour cells using temperature-sensitive block copolymer coupled Au NRs@SiO2 is reported. While the Au NRs serve as hyperthermal agent and the mesoporous silica was used to improve the drug loading and decrease biotoxicity. The block copolymer acted as “gatekeeper” to regulate the release of model drug (Doxorubicin hydrochloride, DOX). Through in vivo and in vitro experiments, we achieved the truly controllable drug release and photothermal therapy with the collaborative effect of the three constituents of the nanocomposites. The reported nanocomposites pave the way to high-performance controllable drug release and photothermal therapy system.

Floating Microsphere of Curcumin as Targeted Gastro-retentive Drug Delivery System

2021 ◽  
pp. 5202-5206
Author(s):  
Anupam K Sachan ◽  
Saurabh Singh ◽  
Kiran Kumari ◽  
Pratibha Devi
Keyword(s):  
Drug Delivery ◽  
Drug Release ◽  
Sustained Release ◽  
Drug Delivery System ◽  
Delivery System ◽  
Entrapment Efficiency ◽  
Synthetic Polymers ◽  
Drug Bioavailability ◽  
Gastric Residence Time

Microspheres carrier system made from natural or synthetic polymers used in sustained release drug delivery system. The present study involves formulation and evaluation of floating microspheres of Curcumin for improving the drug bioavailability by prolongation gastric residence time. Curcumin, natural hypoglycemic agent is a lipophilic drug, absorbed poorly from the stomach, quickly eliminated and having short half-life so suitable to formulate floating drug delivery system for sustained release. Floating microspheres of curcumin were formulated by solvent evaporation technique using ethanol and dichloromethane (1:1) as organic solvent and incorporating various synthetic polymers as coating polymer, sustain release polymers and floating agent. The final formulation were evaluated various parameters such as compatibility studies, micrometric properties, In-vitro drug release and % buoyancy. FTIR studies showed that there were no interaction between drug and excipients. The surface morphology studies by SEM confirmed their spherical and smooth surface. The mean particles size were found to be 416-618µm, practical yield of microspheres was in the range of 60.21±0.052% - 80.87±0.043%, drug entrapment efficiency 47.4±0.065% - 77.9±0.036% and % buoyancy 62,24±0.161% - 88.63±0.413%. Result show that entraptmency increased as polymer (Eudragit RS100) conc. Increased. The drug release after 12 hrs. was 72.13% - 87.13% and it decrease as a polymer (HPMC, EC) concentration was decrease.

scholarly journals In Vitro Cytotoxicity and Antitumor Activity of Dual-Targeting Drug Delivery System Based on Modified Magnetic Carbon by Folate

2020 ◽  
Vol 2020 ◽  
pp. 1-11
Author(s):  
Jinglei Du ◽  
Qiang Li ◽  
Lin Chen ◽  
Shicai Wang ◽  
Li Zhang ◽  
...  
Keyword(s):  
Drug Delivery ◽  
Drug Delivery System ◽  
Delivery System ◽  
Hela Cells ◽  
Folate Receptor ◽  
Drug Loading ◽  
Magnetic Characteristics ◽  
Loading Capacity ◽  
Dual Targeting

A dual-targeting drug delivery system (DTDDS) with magnetic targeting and active targeting was obtained to improve the targeting and drug-loading capacity of magnetic drug nanocarriers. An ultraviolet-visible spectrophotometer and flow cytometry were used to investigate the drug-loading and release capacity, cytotoxicity, and inhibition of tumor cell proliferation, separately. Results show that DTDDS has obvious magnetic characteristics, on which the modification amount of folic acid is 64.82 mg g-1. Doxorubicin was taken as a template drug to evaluate its drug-loading capacity, which was as high as 577.12 mg g-1. Good biocompatibility and low cytotoxicity of DTDDS were further confirmed. Moreover, DTDDS can target the folate receptor on the surface of HeLa cells and deliver doxorubicin into HeLa cells, thereby increasing the proliferation inhibition for cancer cells. Therefore, this new dual-targeting drug delivery system shows potential in significantly reducing the toxic side effects of chemotherapy and improving chemotherapy efficiency.

Supramolecular micellar drug delivery system based on multi-arm block copolymer for highly effective encapsulation and sustained-release chemotherapy

2019 ◽  
Vol 7 (37) ◽  
pp. 5677-5687 ◽  
Author(s):  
Li Zhang ◽  
Dongjian Shi ◽  
Chunling Shi ◽  
Tatsuo Kaneko ◽  
Mingqing Chen
Keyword(s):  
Drug Delivery ◽  
Block Copolymer ◽  
Sustained Release ◽  
Drug Delivery System ◽  
Delivery System ◽  
Drug Loading ◽  
High Drug ◽  
Release Drug ◽  
Drug Loading Efficiency ◽  
High Drug Loading

A novel multi-arm polyphosphoester-based nanomaterial provides high drug loading efficiency and sustained-release drug delivery for effective chemotherapy.

Sucrose Acetate Isobutyrate as an In situ Forming Implant for Sustained Release of Local Anesthetics

2019 ◽  
Vol 16 (4) ◽  
pp. 331-340
Author(s):  
Hanmei Li ◽  
Yuling Xu ◽  
Yuna Tong ◽  
Yin Dan ◽  
Tingting Zhou ◽  
...  
Keyword(s):  
Drug Delivery ◽  
Sustained Release ◽  
Local Anesthetics ◽  
Subcutaneous Injection ◽  
In Vitro Release ◽  
Pharmacokinetic Analysis ◽  
Burst Release

Objective: In this study, an injectable Sucrose Acetate Isobutyrate (SAIB) drug delivery system (SADS) was designed and fabricated for the sustained release of Ropivacaine (RP) to prolong the duration of local anesthesia. Methods: By mixing SAIB, RP, and N-methyl-2-pyrrolidone, the SADS was prepared in a sol state with low viscosity before injection. After subcutaneous injection, the pre-gel solution underwent gelation in situ to form a drug-released depot. Result: The in vitro release profiles and in vivo pharmacokinetic analysis indicated that RP-SADS had suitable controlled release properties. Particularly, the RP-SADS significantly reduced the initial burst release after subcutaneous injection in rats. Conclusion: In a pharmacodynamic analysis of rats, the duration of nerve blockade was prolonged by over 3-fold for the RP-SADS formulation compared to RP solution. Additionally, RP-SADS showed good biocompatibility in vitro and in vivo. Thus, the SADS-based depot technology is a safe drug delivery strategy for the sustained release of local anesthetics with long-term analgesia effects.

Sign in / Sign up

Export Citation Format

Share Document