Fabrication of cefixime nanoparticles loaded films and their ex vivo antimicrobial effect on periodontitis patient’s saliva

2021 ◽  
Vol 10 ◽  
Author(s):  
Rakeshkumar Parmar ◽  
Mohammad Salman M ◽  
Payal Chauhan
Keyword(s):  
Molecular Weight ◽  
Drug Release ◽  
Ex Vivo ◽  
Chitosan Film ◽  
Inhibition Zone ◽  
Release Profile ◽  
Low Molecular Weight ◽  
Drug Release Profile ◽  
Low Molecular Weight Chitosan

Aim: This study was designed to prepare and evaluate cefixime-loaded nanoparticles containing low molecular weight chitosan films for the enhanced topical treatment of periodontitis. Methods: To fabricate the enhanced antimicrobial films, a nanoprecipitation method for cefixime nanoparticles followed by a solvent evaporation method for these nanoparticles loaded films were adopted in this study. Nine batches of nanoparticles (NPs) with different concentrations of ethyl cellulose and polyvinyl alcohol were prepared and evaluated. Furthermore, nine batches of optimized NPs loaded films with different concentrations of low molecular weight chitosan and glycerol were fabricated and evaluated. Optimized NPs loaded films were assessed for their antimicrobial activity against the periodontitis patient’s saliva samples. Results: The FT-IR spectroscopy and XRD study revealed that there was no interaction between the drug and all other excipients and the drug remained amorphous form in chitosan film. The SEM study revealed that the prepared NPs were spherical in shape and uniformly distributed in chitosan film. In vitro drug release study revealed the NPs have a sustained release profile up to 8 days and NPs loaded films have up to 11 days. The conventional marketed mouth wash shows a low inhibition zone of 5.70 ± 0.043 mm, whereas NPs loaded film shows a higher inhibition zone of 6.72 ± 0.063 mm against periodontal microorganisms present in the patient’s saliva. The stability study revealed that the optimized NPs loaded film shows no dramatic change in drug release profile and folding endurance after six months. Conclusion: This present study highlights the possible usage of cefixime NPs loaded films in enhanced periodontal treatment.

scholarly journals Tailoring drug release profile of low-molecular-weight hydrogels by supramolecular co-assembly and thiol–ene orthogonal coupling

2011 ◽  
Vol 21 (3) ◽  
pp. 641-644 ◽  
Author(s):  
David Díaz Díaz ◽  
Emmanuelle Morin ◽  
Eva M. Schön ◽  
Ghyslain Budin ◽  
Alain Wagner ◽  
...  
Keyword(s):  
Molecular Weight ◽  
Drug Release ◽  
Release Profile ◽  
Low Molecular Weight ◽  
Drug Release Profile

DEVELOPMENT AND CHARACTERIZATION OF MUCOADHESIVE PATCHES OF NICERGOLINE FOR BUCCAL DRUG DELIVERY BY USING FACTORIAL DESIGN OF EXPERIMENT (DOE)

INDIAN DRUGS ◽  
2020 ◽  
Vol 57 (07) ◽  
pp. 52-57
Keyword(s):  
Drug Release ◽  
Factorial Design ◽  
Design Of Experiment ◽  
Release Profile ◽  
Drug Release Profile ◽  
In Vitro Drug Release ◽  
Drug Release Study ◽  
Drug Content ◽  
Release Study

The aim of this research was to develop mucoadhesive buccal patches of nicergoline by using Factorial Design of Experiment, in order to provide a sustained release of drug into the systemic circulation. A 33 factorial experimental design was employed for optimization and to study the effect of formulation variables on responses R1 (% swelling index), R2 (% drug content), R3 (mucoadhesion time) and R4 (mucoadhesion strength). In vitro drug release study was performed on the optimized formulations. All the prepared formulations had good mechanical strength, mucoadhesion strength, neutral surface pH and drug content up to 98.17%. In vitro drug release study revealed that F-5 formulation showed promising sustained drug release profile (98.21%) for over 8 h and could be a potential substitute for marketed conventional formulations. The developed formulation (F5) was found to be optimized with considerably good stability and extended drug release profile.

Emulgels Containing Carbopol 934P and Different Vegetable Oils for Topical Propolis Delivery: Bioadhesion, Drug Release Profile, and Ex Vivo Skin Permeation Studies

2020 ◽  
Vol 21 (6) ◽  
Author(s):  
Rafaela Said dos Santos ◽  
Camila Félix Vecchi ◽  
Hélen Cássia Rosseto ◽  
Jéssica Bassi da Silva ◽  
Maria Eduarda Lima Dano ◽  
...  
Keyword(s):  
Drug Release ◽  
Vegetable Oils ◽  
Ex Vivo ◽  
Skin Permeation ◽  
Release Profile ◽  
Drug Release Profile ◽  
Permeation Studies ◽  
Carbopol 934P

Effect of Low-Molecular-Weight Heparin (Tinzaparin) and Unfractionated Heparin on Platelet Aggregation

1996 ◽  
Vol 2 (3) ◽  
pp. 209-212 ◽  
Author(s):  
Hanne B. Ravn ◽  
Claus Bregengaard ◽  
Henrik Vissinger ◽  
Per Østergaard ◽  
Jan Holst ◽  
...  
Keyword(s):  
Molecular Weight ◽  
Platelet Aggregation ◽  
Unfractionated Heparin ◽  
Low Molecular Weight Heparin ◽  
Ex Vivo ◽  
Subcutaneous Administration ◽  
Low Molecular Weight ◽  
Pronounced Difference ◽  
Dose Dependent

A low-molecular-weight heparin (LMWH), when anti-IIa activity was compared. In the ex vivo part Tinzaparin, was compared with unfractionated heparin of the study, a significant enhancement of ADP-induced (UFH) for their effects on platelet aggregation in vitro and platelet aggregation was observed after i.v. administra ex vivo. Both heparins showed a dose-dependent proag- tion of both Tinzaparin and UFH with no difference in gregatory effect on ADP- and collagen-induced platelet potency. Subcutaneous administration of Tinzaparin in aggregation in vitro, but LMWH was less potent. The two different doses did not have any effect on platelet differences in potency between Tinzaparin and UFH de- activity. In conclusion, Tinzaparin appears, like other pended on how the compounds were compared. The most LMWHs, to have less proaggregatory effect on platelets pronounced difference was found when molar concentra- than UFH both in vitro and ex vivo.

Drug release profile and reduction in the in vitro burst release from pectin/HEMA hydrogel nanocomposites crosslinked with titania

RSC Advances ◽  
2016 ◽  
Vol 6 (23) ◽  
pp. 19060-19068 ◽  
Author(s):  
Elisangela P. da Silva ◽  
Marcos R. Guilherme ◽  
Francielle P. Garcia ◽  
Celso V. Nakamura ◽  
Lucio Cardozo-Filho ◽  
...  
Keyword(s):  
Controlled Release ◽  
Drug Release ◽  
Release Profile ◽  
Burst Release ◽  
Drug Release Profile ◽  
Initial Release ◽  
Hydrogel Nanocomposites

Hydrogel nanocomposites of pectin, HEMA and titania for Vit-B12 controlled release with reduced initial release burst were prepared. A reduction of up to ca. 60% was observed.

scholarly journals Application of Mathematical Models in Drug Release Kinetics of Cyanocobalamine Fast Dissolving Sublingual Film

2021 ◽  
pp. 72-81
Author(s):  
Adil Patel ◽  
Ami Kalsariya ◽  
Srushti Patel ◽  
Chandni Patel ◽  
Shreya Patel
Keyword(s):  
Drug Release ◽  
Mathematical Models ◽  
Release Kinetics ◽  
Release Profile ◽  
Suitable Model ◽  
Order Model ◽  
Drug Release Profile ◽  
Casting Technique ◽  
Kinetics Of

The aim of present work is to determine and analyse the kinetics of drug release from the fast dissolving sublingual by employing various mathematical models. A study was done with Cyanocobalamine fast dissolving sublingual films, 1.5 mg/film by employing solvent casting technique using dehydrated banana starch and Gelatin. The in-vitro drug release profile was carried out in pH 6.8 phosphate buffer (900 mL) using USP dissolution apparatus I (Basket) at 50 rpm for 20 mins. The drug release data was obtained, quantitatively correlated and interpreted with various mathematical models viz. Zero order model, first order model, Higuchi model, Hixson-Crowell model and Korsmeyer-Peppas model and evaluated to understand the kinetics of drug release. The criterion for the most suitable model was based on the high degree of coefficient of correlation of drug release profile of Cyanocobalamine fast dissolving sublingual films.

scholarly journals Formulation and Evaluation of Colchicine Sustained release tablet by using factorial designs

2021 ◽  
Vol 11 (5-S) ◽  
pp. 100-107
Author(s):  
M. Pradeep Kumar ◽  
Goparaju Suryanarayana Murthy ◽  
Annamdasu Lakshmi Poojitha ◽  
P. Sindhuri ◽  
A Sreekanth ◽  
...  
Keyword(s):  
Drug Release ◽  
Ethyl Cellulose ◽  
Polymer Concentration ◽  
Release Profile ◽  
Drug Release Profile ◽  
In Vitro Drug Release ◽  
Similarity Factor ◽  
Time Required ◽  
Full Factorial

The study on the effect of polymer concentration on in vitro drug release profile revealed that there is a change in vitro drug release parameters (t50, t80, and MDT) with a change in polymer concentration. Fraction of HPMC K4M, HPMC K 100 M, and Ethyl Cellulose were required to be 15, 10, and 7 mg respectively for designing optimized batch F7. The release rate of Colchicine decreased proportionally with an increase in the concentration of ethyl Cellulose and HPMC K100 M. Also the high amount of HPMC K4M leads to the less initial release and sustain effect. A theoretical drug release profile was generated using pharmacokinetic parameters of Colchicine. The value of t50 and t80 of theoretical drug release profile was found to be 242 min and 529 min respectively. The similarity factor f2 was applied between the in vitro drug release profile of optimizing batches and theoretical profile, which indicate a decent similarity between all in vitro drug release profiles (f2 = 68.28 for F7). All the batches except F1shows the value of f2 value within a range. Batch F7 showed the highest f2 (f2 = 68.28) among all the batches and this similarity was also reflected in t50 (≈ 256 min) and t80 (≈ 554 min) values. A 23 full factorial design was applied to systemically optimize in vitro drug release profile. The HPMC K4M (X1), Concentration of HPMC K100 M (X2), and concentration of EC (X3) were selected as independent variables. The time required for 50% drug released (t50), the time required for 80% drug release (t80), similarity factor f2, and mean dissolution time (MDT) were selected as dependent variables. The results of full factorial design indicate that the HPMC K4M (X1), Concentration of HPMC K100 M (X2), and concentration of EC (X3) have a significant effect on in vitro drug release profile. To find out the release mechanism the in vitro release data were fitted in the Korsmeyer-Peppas equation. All Batches except F1 and F3 show Anomalous diffusion-controlled release (combined mechanism of diffusion and case II transport).  

scholarly journals Preparation and characterization of azathioprine microspheres for colon specific delivery

2019 ◽  
Vol 9 (2) ◽  
pp. 97-101
Author(s):  
Rinku Gonekar ◽  
Mohan Lal Kori
Keyword(s):  
Drug Delivery ◽  
Particle Size ◽  
Drug Release ◽  
Study Drug ◽  
Entrapment Efficiency ◽  
Release Profile ◽  
Intestinal Fluid ◽  
Drug Release Profile ◽  
Fecal Matter

The objective of the present study is to develop colon targeted drug delivery system using dextrin (polysaccharide) as a carrier for Azathioprine.  Microspheres containing azathioprine, dextrin and various excipients were prepared by solvent evaporation technique. The prepared microsphere were evaluated by different methods parameters like particle size,  drug entrapment efficiency, percentage yield, shape and surface morphology  and in vitro drug release study. Drug release profile was evaluated in simulated gastric, intestinal fluid and simulated colonic fluid. Best formulation was decided on the basis drug release profile in simulated gastric, intestinal fluid and simulated colonic fluid. In dextrin based microspheres, dextrin as a carrier was found to be suitable for targeting of Azathioprine for local action in the site of colon. Dextrin microspheres released 95-99% of azathioprine in simulated colonic fluid with 4% human fecal matter solution. The results of in-vitro studies of the azathioprine microspheres indicate that for colon targeting dextrin are suitable carriers to deliver the drug specifically in the colonic region. Dextrin based azathoprine microspheres showed no significance change in particle size and % residual upon storage at 5 ± 3ºC, 25 ± 2ºC/60 ± 5% RH (room temperature) and 40 ± 2ºC/75 ±5%RH humidity for three months. Keywords: azathioprine, microsphere, dextrin, colon specific drug delivery.

scholarly journals Nematicidal activity of a biopolymer chitosan at different molecular weights against root-knot nematode, Meloidogyne incognita

2012 ◽  
Vol 48 (No. 4) ◽  
pp. 170-178 ◽  
Author(s):  
M.S. Khalil ◽  
M.E.I. Badawy
Keyword(s):  
Molecular Weight ◽  
Meloidogyne Incognita ◽  
Nematicidal Activity ◽  
Egg Mass ◽  
Low Molecular Weight ◽  
Root Knot Nematode ◽  
Molecular Weights ◽  
Tomato Seedlings ◽  
Low Molecular Weight Chitosan

The nematicidal activity of four molecular weights (2.27 &times; 10<sup>5</sup>, 3.60 &times; 10<sup>5</sup>, 5.97 &times; 10<sup>5</sup>, and 9.47 &times; 10<sup>5</sup> g/mol) of a biopolymer chitosan was assayed against the root-knot nematode, Meloidogyne incognita, in vitro and in pot experiments. In laboratory assays, the nematode mortality was significantly influenced by exposure times and chitosan molecular weight. Low molecular weight chitosan (2.27 &times; 10<sup>5</sup> g/mol) was the most effective in killing the nematode with EC<sub>50</sub> of 283.47 and 124.90 mg/l after 24 and 48 h of treatment, respectively. In a greenhouse bioassay, all the compounds mixed in soil at one- and five-fold concentrations of the LC<sub>50</sub> value significantly reduced population, egg mass, and root galling of tomato seedlings compared with the untreated control. In general, the nematicidal activity of these compounds was increased dramatically with a decrease in the molecular weight. The results suggest that the chitosan at low molecular weight may serve as a natural nematicide

Sign in / Sign up

Export Citation Format

Share Document