Bisphenol A Release from Dental Composites and Resin-Modified Glass Ionomers under Two Polymerization Conditions

Bisphenol A (BPA)-based monomers are commonly contained in dental resin-based materials. As BPA is an endocrine disruptor, its long-term release from restorative composites and resin-modified glass ionomers (RM-GICs) under two polymerization conditions was measured in this study. Specimens of two conventional composites containing BPA-based monomers, two “BPA-free” composites, and two RM-GICs were polymerized from one side for 20 s at 1300 mW/cm2 or for 5 s at 3000 mW/cm2. The amounts of BPA released in artificial saliva and methanol after 1, 4, 9, 16, 35, 65, 130, and 260 days were measured using liquid chromatography–tandem mass spectrometry. The highest amounts of BPA were released from conventional composites, followed by RM-GICs, while the least was released from “BPA-free” composites. Amounts of released BPA were significantly higher in methanol and decreased gradually after the first day. Fast polymerization (5 s at 3000 mW/cm2) resulted in a significantly higher release of BPA after 1 day, but the effect of polymerization conditions was not significant overall. In conclusion, fast polymerization increased the initial release of BPA, but the released amounts were significantly lower than the current tolerable daily intake (4 μg/kg body weight/day) even in methanol, representing the worst-case scenario of BPA release.

The Effect of Calcium Gluconate on Platelet Rich Plasma Activation for VEGF-A Expression of Human Dental Pulp Stem Cells

Objective Platelet-rich plasma (PRP) activation is an important factor in triggering the initial release of blood-derived growth factors from platelets. Vascular endothelial growth factor-A (VEGF-A) can be expressed by human dental pulp stem cells (hDPSCs) and plays an important role in dental pulp angiogenesis. The aim of this study is to analyze the effects of calcium gluconate on PRP activation in hDPSC VEGF-A expression. Materials and Methods Two types of PRP and their corresponding activators were analyzed in this study: PRP (activated using calcium chloride/CaCl2) and PRP-T (activated using CaCl2 with the addition of 10% calcium gluconate). hDPSCs were obtained by using an out-growth method (DPSCs-OG), and harvest between the fifth and sixth passages, then cultured in three different media groups: control, PRP, and PRP-T, which were planted in 96 wells (5 × 103 each well). The VEGF-A expression of hDPSCs was analyzed by using an ELISA test and observed at 24, 48, and 72 hours. Statistical Analysis This study was performed by using one-way ANOVA (p < 0.05) test. Results There were significant differences between all groups (p < 0.05) at 48 and 72 hours of observations, and no significant differences in the PRP and PRP-T groups at 48 and 72 hours of observations (p > 0.05). Conclusion PRP and PRP-T were equally effective in inducing VEGF-A expression of hDPSCs.

Electrospun Structural Hybrids of Acyclovir-Polyacrylonitrile at Acyclovir for Modifying Drug Release

In traditional pharmaceutics, drug–crystalline nanoparticles and drug–polymer composites are frequently explored for their ability to modify drug release profiles. In this study, a novel sort of hybrid with a coating of acyclovir crystalline nanoparticles on acyclovir-polyacrylonitrile composites was fabricated using modified, coaxial electrospinning processes. The developed acyclovir-polyacrylonitrile at the acyclovir nanohybrids was loaded with various amounts of acyclovir, which could be realized simply by adjusting the sheath fluid flow rates. Compared with the electrospun composite nanofibers from a single-fluid blending process, the nanohybrids showed advantages of modifying the acyclovir release profiles in the following aspects: (1) the initial release amount was more accurately and intentionally controlled; (2) the later sustained release was nearer to a zero-order kinetic process; and (3) the release amounts at different stages could be easily allocated by the sheath fluid flow rate. X-ray diffraction results verified that the acyclovir nanoparticles were in a crystalline state, and Fourier-transform infrared spectra verified that the drug acyclovir and the polymer polyacrylonitrile had a good compatibility. The protocols reported here could pave the way for developing new types of functional nanostructures.

The ontology of fast food facts: conceptualization of nutritional fast food data for consumers and semantic web applications

Background Fast food with its abundance and availability to consumers may have health consequences due to the high calorie intake which is a major contributor to life threatening diseases. Providing nutritional information has some impact on consumer decisions to self regulate and promote healthier diets, and thus, government regulations have mandated the publishing of nutritional content to assist consumers, including for fast food. However, fast food nutritional information is fragmented, and we realize a benefit to collate nutritional data to synthesize knowledge for individuals. Methods We developed the ontology of fast food facts as an opportunity to standardize knowledge of fast food and link nutritional data that could be analyzed and aggregated for the information needs of consumers and experts. The ontology is based on metadata from 21 fast food establishment nutritional resources and authored in OWL2 using Protégé. Results Three evaluators reviewed the logical structure of the ontology through natural language translation of the axioms. While there is majority agreement (76.1% pairwise agreement) of the veracity of the ontology, we identified 103 out of the 430 statements that were erroneous. We revised the ontology and publicably published the initial release of the ontology. The ontology has 413 classes, 21 object properties, 13 data properties, and 494 logical axioms. Conclusion With the initial release of the ontology of fast food facts we discuss some future visions with the continued evolution of this knowledge base, and the challenges we plan to address, like the management and publication of voluminous amount of semantically linked fast food nutritional data.

The Affective Database: 'Symulation' and Enacting Worldhood in the Film-worlds of Scott Barley

This article offers an alternate evolution of Lev Manovich’s (1999) concept of the database film, explored through the work of Welsh experimental filmmaker Scott Barley. Suggesting the existence of an affective type of database, this codifies their production as a form of ecological activism which phenomenologically affects viewers and creates a worldhood that each film inhabits. Viewers emerge as agential participants, which this article argues is an entanglement that occurs and continues long after the film’s initial release. Barley’s works often eschew formulations of humans, and instead invoke abstracted images of the world and wild animals, engendering an altered process of thought that attempts to avoid, reject and/or refute anthropocentrism. As Barley’s work continues to catalyse considerations of darkness, time, space and Jean Baudrillard’s simulation (1994), I argue that such films allow moments of stasis and stillness that are akin to death, bringing forth further considerations in viewer-participants about the world(s) they inhabit.

Increasing the Transport of Celecoxib over a Simulated Intestine Cell Membrane Model Using Mesoporous Magnesium Carbonate

In the current work, mesoporous magnesium carbonate (MMC) was used to suppress crystallization of the poorly soluble drug celecoxib (CXB). This resulted in both a higher dissolution rate and supersaturation of the substance in vitro as well as an increased transfer of CXB over a Caco-2 cell membrane mimicking the membrane in the small intestine. The CXB flux over the cell membrane showed a linear behavior over the explored time period. These results indicate that MMC may be helpful in increasing the bioavailability and obtaining a continuous release of CXB, and similar substances, in vivo. Neusilin US2 was used as a reference material and showed a more rapid initial release with subsequent crystallization of the incorporated CXB in the release media. The presented results form the foundation of future development of MMC as a potential carrier for poorly soluble drugs.

Clarity 2.0: Improved Assessment of Product Competitiveness from Online Content

Competitive analysis is a critical part of any business. Product managers, sellers, and marketers spend time and resources scouring through an immense amount of online and offline content, aiming to discover what their competitors are doing in the marketplace to understand what type of threat they pose to their business’ financial well-being. Currently, this process is time and labor-intensive, slow and costly. This paper presents Clarity, a data-driven unsupervised system for assessment of products, which is currently in deployment in the global technology company, IBM. Clarity has been running for more than a year and is used by over 4,500 people to perform over 200 competitive analyses involving over 1000 products. The system considers multiple factors from a collection of online content: numeric ratings by online users, sentiment of user generated online content for key product performance dimensions, content volume, and topic analysis of content. The results and explanations of factors leading to the results are visualized in an interactive dashboard that allows users to track their product’s performance as well as understand main contributing factors. Its efficacy has been tested in a series of cases across IBM’s portfolio which spans software, hardware, and services. After initial release and first year of use, improvements to the methodology were implemented to ensure it was relevant to and served the highest impact needs of target users. Moreover, new use cases leveraging the initial ideas and approaches continue to be explored.

The Effect of Odour Valence and Odour Detection Threshold on the Withholding and Cancellation of Reach-to-Press Responses

Introduction Withholding uninitiated actions and cancelling ongoing ones are two main components of response inhibition, a key element of the executive control. Inhibitory performance is sensitive to emotional contexts elicited by subliminal and supraliminal visual material. However, whether stimuli from other sensory modalities, such as odours, would equally modulate response inhibition remains unclear. Here, we aimed to assess the effect of task-irrelevant odours as a function of their valence and threshold on both action withholding and action cancellation of reach-to-press movements. Method Thirty-two healthy participants performed a Go/No-Go task that included the presentation of pleasant (orange) and unpleasant (trimethyloxazole) odour primes at supra- and sub-threshold levels; clean air was included as a control condition. The reach-to-press responses were composed of an initial release phase and a subsequent reaching phase. Results Only the supra-threshold pleasant (vs. control) odour impaired action withholding. Moreover, the pleasant (vs. control) odour—presented at both sub- and supra-threshold levels—elicited more accurate Go responses, whereas the sub- and supra-threshold pleasant and unpleasant (vs. control) odours triggered faster responses in the release phase. Additionally, only the supra-threshold pleasant (vs. unpleasant) odour impaired action cancellation in the reaching phase. Furthermore, reaching responses were slower following the supra-threshold unpleasant (vs. control) odour. Conclusions Our findings extend the sparse literature on the impact of odour stimuli on goal-directed behaviour, highlighting the role of both odour valence and threshold in the modulation of response inhibition. Implications Determining the mechanisms by which odour stimuli modulate response inhibition lays the foundations for research on odour-triggered disinhibition.

A prey–predator model and control of a nematodes pest using control in banana: Mathematical modeling and qualitative analysis

This study develops a mathematical model for describing the dynamics of the banana-nematodes and its pest detection method to help banana farmers. Two criteria: the mathematical model and the type of nematodes pest control system are discussed. The sensitivity analysis, local stability, global stability, and the dynamic behavior of the mathematical model are performed. Further, we also develop and discuss the optimal control mathematical model. This mathematical model represents various modes of management, including the initial release of infected predators as well as the destroying of nematodes. The theoretical results are shown and verified by numerical simulations.