Study of Mix Proportion of Structural Concrete with Recycled Aggregate of CCW for Application in Precast Slabs

2018 ◽  
Keyword(s):  
Recycled Aggregate ◽  
Structural Concrete ◽  
Mix Proportion

scholarly journals Effect of Mineral Admixtures on the Performance of Low-Quality Recycled Aggregate Concrete

Crystals ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 596
Author(s):  
Yasuhiro Dosho
Keyword(s):  
Blast Furnace ◽  
Fly Ash ◽  
Blast Furnace Slag ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Mineral Admixtures ◽  
Structural Concrete ◽  
Aggregate Concrete ◽  
Granulated Blast Furnace Slag ◽  
Furnace Slag

To improve the application of low-quality aggregates in structural concrete, this study investigated the effect of multi-purpose mineral admixtures, such as fly ash and ground granulated blast-furnace slag, on the performance of concrete. Accordingly, the primary performance of low-quality recycled aggregate concrete could be improved by varying the replacement ratio of the recycled aggregate and using appropriate mineral admixtures such as fly ash and ground granulated blast-furnace slag. The results show the potential for the use of low-quality aggregate in structural concrete.

Structural Concrete with Recycled Aggregate: Advances in Mechanical Properties, Durability and Sustainability

2016 ◽  
Vol 847 ◽  
pp. 553-558 ◽  
Author(s):  
Marc Antonio Liotta ◽  
Marco Viviani ◽  
Carlotta Rodriquez
Keyword(s):  
Cement Mortar ◽  
Recycled Concrete ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Mix Design ◽  
Elastic Behavior ◽  
Structural Concrete ◽  
Concrete Aggregates ◽  
Recycled Concrete Aggregates ◽  
Ordinary Concrete

A large number of tests has been carried out in the last 15 years all around the world to study the possibility to use recycled concrete aggregates (RCA) to produce structural concrete.Earlier tests indicated that RCA concrete had lower properties in comparison to ordinary concrete, such as lower elastic modulus, a more brittle post-elastic behavior, lower workability, higher shrinkage and creep.Most of these issues have been addressed to the content of cement mortar remaining in adhesion to the aggregate after the recycling processes and that cannot be totally eliminated without high economic and ecological costs. This cement mortar which has undergone the crushing process creates zones of weakness in the RCA, causes higher water absorption, higher concrete porosity and causes the decay of the aforementioned properties.More recent tests prove that Recycled Concrete shows this peculiar problems only with a percentage of substitution of standard aggregates with RCA higher than 30%. Under this percentage recycled aggregate concrete (RAC) can be considered as a standard concrete, on condition that an appropriate mix design is performed.

scholarly journals Use of Recycled Tyre Rubber in Non-structural Concrete

2018 ◽  
Vol 203 ◽  
pp. 06001
Author(s):  
Muhammad Bilal Waris ◽  
Hussain Najwani ◽  
Khalifa Al-Jabri ◽  
Abdullah Al-Saidy
Keyword(s):  
Compressive Strength ◽  
Water Absorption ◽  
Coarse Aggregate ◽  
Partial Replacement ◽  
Fine Aggregate ◽  
Structural Concrete ◽  
Cement Ratio ◽  
Mix Proportion ◽  
Water To Cement Ratio ◽  
Concrete Blocks

To manage tyre waste and conserve natural aggregate resource, this research investigates the use of waste tyre rubber as partial replacement of fine aggregates in non-structural concrete. The research used Taguchi method to study the influence of mix proportion, water-to-cement ratio and tyre rubber replacement percentage on concrete. Nine mixes were prepared with mix proportion of 1:2:4, 1:5:4 and 1:2.5:3; water-to-cement ratio of 0.25, 0.35 and 0.40 and rubber to fine aggregate replacement of 20%, 30% and 40%. Compressive strength and water absorption tests were carried out on 100 mm cubes. Compressive strength was directly proportional to the amount of coarse aggregate in the mix. Water-to-cement ratio increased the strength within the range used in the study. Strength was found to be more sensitive to the overall rubber content than the replacement ratio. Seven out of the nine mixes satisfied the minimum strength requirement for concrete blocks set by ASTM. Water absorption and density for all mixes satisfied the limits applicable for concrete blocks. The study indicates that mix proportions with fine to coarse aggregate ratio of less than 1.0 and w/c ratio around 0.40 can be used with tyre rubber replacements of up to 30 % to satisfy requirements for non-structural concrete.

Experimental Research on Pore Structure of RCA and its Impact on Drying Shrinkage

2011 ◽  
Vol 335-336 ◽  
pp. 1141-1144 ◽  
Author(s):  
Yun Xiang He
Keyword(s):  
Fly Ash ◽  
Pore Structure ◽  
Drying Shrinkage ◽  
Recycled Aggregate ◽  
Structure Theory ◽  
Replacement Rate ◽  
Pore Characteristics ◽  
Cement Ratio ◽  
Mix Proportion ◽  
The Impact

Pore structure is one of the main influencing factors of materials drying shrinkage. C30 natural mix proportion is used as reference, the impact of replacement rate of recycled aggregate, the mixing amount of fly ash, water reducer, expansion agent and water-cement ratio on recycled aggregate concrete’s porosity and pore characteristics was studied. Based on the pore structure theory, the influence of porosity and pore characteristics on recycled aggregate concrete’s drying shrinkage is analyzed.

Durable Performance of Recycled Concrete Using Coarse and Fine Recycled Concrete Aggregates in Air Environment

2011 ◽  
Vol 261-263 ◽  
pp. 446-449 ◽  
Author(s):  
Ping Hua Zhu ◽  
Xin Jie Wang ◽  
Jin Cai Feng
Keyword(s):  
Recycled Concrete ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Structural Concrete ◽  
Aggregate Concrete ◽  
Cube Strength ◽  
Concrete Aggregates ◽  
Recycled Concrete Aggregates ◽  
Natural Aggregate ◽  
Concrete Mixtures

The influence of synchronous use of coarse and fine recycled concrete aggregates on durable performance of recycled aggregate concrete (RAC) in air environment were determined. In this study, three series of concrete mixtures were prepared, in which the coarse recycled aggregate was used as 0%, 30%, 60% and 90% replacements of coarse natural aggregate and fine recycled aggregate as 0%, 10%, 20%, and 30% replacements of fine natural aggregate. Meanwhile, fly ash and slag were used as 15%, 25%, 35% and 45% replacements of cement, respectively. The carbonation depths, compressive cube strength, workability of RACs were tested. The experimental results showed that RAC with synchronous use of coarse and fine recycled concrete aggregates had satisfactory durable performance. When RAC was used as structural concrete in air environment, the optimum synchronous replacements are 60% for coarse recycled aggregate and 20% for fine recycled aggregate.

On Properties of Recycled Fine Aggregate for Structural Concrete from Repeatedly Recycling Concrete Waste

2014 ◽  
Vol 665 ◽  
pp. 163-166
Author(s):  
Ping Hua Zhu ◽  
Fei Fei Xie ◽  
Qun Xia
Keyword(s):  
Structural Properties ◽  
Experimental Research ◽  
Performance Degradation ◽  
Recycled Aggregate ◽  
Fine Aggregate ◽  
Preparation Process ◽  
Structural Concrete ◽  
Recycled Fine Aggregate ◽  
Waste Concrete

In order to explore the possibility of using repeatedly recycling waste concrete as aggregate to produce structural concrete, experimental research was carried out on the structural properties of three kinds of recycled fine aggregate (RFA) with two-regeneration cycles, two single and one mixed. The results showed that the quality of all RFAs meet the needs of Grade Ⅲ in GB/T25177-2010 and Level L in JISA 5023-2000. The degree of performance degradation is observed to enhance with increasing recycling cycle when taking the same preparation process of recycled aggregate.

scholarly journals Experimental study on mechanical properties and microstructures of steel fiber-reinforced fly ash-metakaolin geopolymer-recycled concrete

2021 ◽  
Vol 60 (1) ◽  
pp. 578-590
Author(s):  
Zhong Xu ◽  
Zhenpu Huang ◽  
Changjiang Liu ◽  
Xiaowei Deng ◽  
David Hui ◽  
...  
Keyword(s):  
Tensile Strength ◽  
Compressive Strength ◽  
Fly Ash ◽  
Steel Fiber ◽  
Recycled Concrete ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Aggregate Concrete ◽  
Mix Proportion ◽  
Optimal Mix

Abstract Geopolymer cementitious materials and recycled aggregate are typical representatives of material innovation research in the engineering field. In this study, we experimentally investigated a method to improve the performance of geopolymer-recycled aggregate concrete (GRAC). The recycled concrete aggregates and steel fiber (SF), fly ash (FA), metakaolin (MK), and sodium silicate solution were used as the main raw materials to prepare fiber-reinforced geopolymer-recycled aggregate concrete (FRGRAC). First, the orthogonal test was carried out to study the GRAC, and the optimal mix proportion was found. Second, building on the optimal mix proportion, the effects of the SF content on the slump, 7 and 28 days compressive strength, tensile strength, and flexural strength of FRGRAC were further studied. Finally, the microscopic mechanism of FRGRAC was studied by scanning electron microscopy (SEM). The study results indicate that the slump continues to decrease as the fiber content increases, but the compressive strength, tensile strength, and flexural strength increase to a certain extent. Through SEM analysis, it is found that SF restrains the development of cracks and improves the strength of concrete.

Sign in / Sign up

Export Citation Format

Share Document