Physical and functional properties of major foods and oil seeds Physical and functional properties of different cereals, pulses, millet and oil seeds

2020 ◽  
Vol 6 (02) ◽  
Author(s):  
MONIKA MATHUR ◽  
ANJU KUMARI ◽  
RAJBALA GREWAL
Keyword(s):  
Functional Properties ◽  
Mineral Content ◽  
Finger Millet ◽  
Foam Stability ◽  
Sesame Seed ◽  
Absorption Capacity ◽  
Water Absorption Capacity ◽  
Oil Seeds ◽  
Emulsification Capacity ◽  
Swelling Capacity

The physical and functional properties of selected cereal, pulses, millets and oil seed were studied. Physical properties of oat, barley, sorghum, chickpea, groundnut, flaxseed, finger millet, amaranth, maize, sesame seed ranged from 0.74 to 527.40 g Thousand seeds weight, 0.39 to 0.79 g bulk density, 0.002 to 0.45g/seed hydration capacity, 0.32 to 1.81 hydration index, 0.001 to 0.16 ml/seed swelling capacity and 0.13 to 0.56 swelling index. Water absorption capacity (2.36%) of sesame seed, gelation capacity (15.50%) of amaranth, emulsification capacity (52.56%) of flaxseed, swelling power (127.5%) of flaxseed, foam capacity (42.44%) of sesame seed and foam stability (99.29%) of finger millet was significantly higher. Finger Millet, amaranth and flaxseeds are high in mineral content. Oat and barley contain higher amount of dietary fiber. All these tested grains can be used for preparation of different type of nutritious products with better physical qualities.

scholarly journals FUNCTIONAL PROPERTIES OF POWDERED AND FRESH EGG ALBUMIN AND YOLK DETERMINATION

2020 ◽  
Vol 4 (3) ◽  
pp. 263-266
Author(s):  
A. Z. Sanusi ◽  
Z. S. Jibia ◽  
M. G. Garba ◽  
U. S. Salisu ◽  
S. Gaddafi
Keyword(s):  
Water Absorption ◽  
Functional Properties ◽  
Egg White ◽  
Absorption Capacity ◽  
Water Absorption Capacity ◽  
Egg Albumin ◽  
Sun Drying ◽  
Emulsification Capacity ◽  
Swelling Capacity ◽  
Foaming Capacity

The study was carried out to evaluate the functional properties of fresh and powdered egg albumin and yolk. The experiment was carried out at Animal Product and Processing lab of the Department of Animal Science, Federal University Dutsinma. Fresh eggs were collect from the Departmental farm. Ten (10eggs) each were weighed and crushed into stainless dish and separated into albumin and yolk for sun drying. After 8 hours of sun drying the crystals were convert into powder form using grinding and sieving techniques. Samples of the powder albumen and yolk were then subjected to functional properties determination. Data collected were analyzed using Statistical Analysis System (SAS) version…2002. The result indicates that there is significant (P<0.05) differences in functional properties of both fresh and powdered Albumin. Egg white (Albumin) fresh had Foaming capacity and Foaming stability values of 20.00% and 9.66% while egg white (Albumin) powdered Foaming capacity and Foaming stability had a lesser values of 11.00 % and 2.33% respectively. The Emulsification capacity (EC) and Emulsification Stability (ES) of Fresh Albumin seems to differ having a lower value (P<0.05) functional properties of 7.00% and 2.66%, while the Emulsification capacity (EC) and Emulsification Stability (ES) of powdered Albumin had higher value (P<0.05) of 35.66% and 4.00%. Similarly the Water Absorption Capacity (WAC) and Swelling Capacity (SC) for Fresh Albumin have a lower value (P<0.05) of 1.00% and 2.00%, while the Water Absorption Capacity (WAC) and Swelling Capacity (SC) of powdered Albumin had higher

scholarly journals Functional, Sensory and Cooking Qualities of Acha-Tigernut Noodles

2020 ◽  
pp. 40-48
Author(s):  
J. A. Ayo ◽  
D. M. Atondo
Keyword(s):  
Functional Properties ◽  
Absorption Capacity ◽  
Composite Flour ◽  
Peak Time ◽  
Oil Absorption ◽  
Water Absorption Capacity ◽  
Swelling Capacity ◽  
Pasting Temperature ◽  
Flour Blends ◽  
General Acceptability

The functional, sensory and cooking characteristics of noodles from blends of Acha-tigernut composite flour were investigated. The flour blends and noodles produced were analyzed for functional properties and cooking characteristics. The tiger nut flour was substituted into acha flour at 5, 10, 15 and 20% to produce Acha-tigernut composite flour which was used with other ingredients (salt and powdered ginger) to produce acha-tigernut based noodles. The functional properties of the flour, sensory and cooking characteristics of the noodles produced were determined. The water absorption capacity and swelling capacity increased from 210.59 to 215.53 (g/g) and 524.43 to 586.57, respectively with increase in tigernut flour. While oil absorption, solubility and bulk density decreases from 209.80 to 192.72 (g/g), 10.17 to 5.19 and 0.79 to 0.61 (g/ml) respectively. The swelling capacity ranged from 524.43 to 586.57 (%) with an increase in tigernut flour. The final viscosity of the samples was found to range from 2833.00to 2201.00 (m2/s). The peak properties decreased from 2680.67 to 1580.33 (RVU). The pasting temperature increases from 82.47to 87.57°C. The addition of tigernut decreased the trough, breakdown and peak time from 1730.67 to 1205.67, 985.67 to 434.67, and 5.84 to 5.71 RVU, respectively. The average mean scores for colour decreased from 6.95 to -6.30(%) While that of taste, flavor, texture and general acceptability increased from 5.55 to 6.60, 5.95 to 6.85 (%), 5.95 to 6.44 (%) and 6.70 to 6.83 (%), respectively, as the percentage of tigernut increased.

scholarly journals The Effects of Watermelon Rind Flour on the Functional and Proximate Properties of Wheat Bread

2020 ◽  
Vol 45 (5) ◽  
Author(s):  
C. Imoisi ◽  
J.U. Iyasele ◽  
U.C. Michael ◽  
E.E. Imhontu
Keyword(s):  
Wheat Flour ◽  
Functional Properties ◽  
Absorption Capacity ◽  
Wheat Bread ◽  
Oil Absorption ◽  
Water Absorption Capacity ◽  
Watermelon Rind ◽  
Composite Flours ◽  
Swelling Capacity ◽  
Composite Bread

The present study was undertaken to develop bread from composite flours. Composite flours were prepared by blending wheat flour with watermelon rind flour in ratios of 100:0 (AB1), 90:10 (AB2), 80:20 (AB3), 70:30 (AB4) and 60:40 (AB5), respectively. This study was carried out to ascertain the effects of watermelon rind flour at different replacement levels (0%, 10%, 20%, 30%, 40%) on the proximate and functional properties of composite wheat bread. The results of proximate properties determination on wheat/flour blend gave low bulk densities of 0.54g/cm3 to 0.60g/cm3, high water absorption capacity of 2.389 to 3.044 g/g as well as a high swelling capacity of 5.764 to 7.610 g/g and a low oil absorption capacity of 1.608 to 2.150 g/g. The results of proximate composition of composite bread revealed an increase in % protein, % carbohydrate and % ash from 15.7% to 18.8%, 47.1% to 52.0% and 0.6% to 1.2% respectively and a subsequent decrease in % fat from 18.4% to 13.8. There was a reduction in energy density for composite bread. The functional properties of composite flours such as swelling capacity, water absorption capacity, oil absorption capacity and bulk density were increased with increase in the incorporation of watermelon rind flour with wheat flour. Thus, the results indicate that by incorporating watermelon rind flour, it is possible to enhance the nutritional quality, chemical and functional properties of bread.

scholarly journals Effects of the Inclusion of Andrographis paniculata Leaf on the Functional Properties and Pasting Characteristics of Wheat-pearl Millet-Based Flour Blends

2020 ◽  
pp. 41-57
Author(s):  
David T. Ishola ◽  
Mathew K. Bolade
Keyword(s):  
Pearl Millet ◽  
Functional Properties ◽  
Pasting Properties ◽  
Absorption Capacity ◽  
Oil Absorption ◽  
Water Absorption Capacity ◽  
Pasting Characteristics ◽  
Swelling Capacity ◽  
Foaming Capacity ◽  
Flour Blends

This study evaluated flour blends from Wheat, Pearl millet and Andrographis paniculata leaf for functional properties and pasting characteristics profiling. The functional properties such as solubility, gelling capacity, water absorption capacity (WAC), Oil absorption capacity (OAC), Bulk density, foaming capacity and stability and swelling capacity and the pasting characteristics were studied. The inclusion of A. paniculata leaf flour in the blends revealed a significant general increase in water absorption capacity, oil absorption capacity, swelling capacity, and bulk density. However, a general decrease in the foaming capacity, solubility, and least gelation was observed as the inclusion of A. paniculata leaf flour increased. The pasting properties of WPMF (flour blend without the inclusion of A. paniculata leaf flour) exhibited the following values: peak viscosity (658 RVU), breakdown (372 RVU), final viscosity (923 RVU), setback (637 RVU), peak time (5.07 min), and pasting temperature (84.8oC). The inclusion of A. paniculata leaf flour in the blends led to a significant general decrease in all the pasting factors. The inclusion of A. paniculata had a significant effect on the functional and pasting properties of wheat-pearl millet based flour.

scholarly journals Impacts of Cooking Times (Steaming and Cooking on Embers) on Some Physico-Functional Parameters of Yam (Dioscorea bulbifera) Flours Cv Dougon-won Consumed in Côte d'Ivoire

2019 ◽  
pp. 1-13
Author(s):  
Gbocho Serge Elvis Ekissi ◽  
Jacques Yapi Achy ◽  
Martin Tanoh Kouadio ◽  
Bedel Jean Fagbohoun ◽  
Lucien Patrice Kouamé
Keyword(s):  
Water Absorption ◽  
Bulk Density ◽  
Water Solubility ◽  
Foam Stability ◽  
Absorption Capacity ◽  
Water Absorption Capacity ◽  
Functional Parameters ◽  
Swelling Power ◽  
Dioscorea Bulbifera ◽  
Cooking Times

Impacts of cooking times (steaming and cooking on embers) on some physico-functional parameters of yam (D. bulbifera) flours cv Dougou-won were determined during 10, 20 and 30 min. Results showed that steaming and cooking on embers increased significantly (P <0.05) the dispersibility (D), water absorption capacity (WAC), paste clarity (PC), water solubility index (WSI), swelling power (SP), least gelation capacity (LGC) and solubility (S) but decreased significantly (P <0.05) foam capacity (FC), wettability (W) and foam stability (FS) of flours (D. bulbifera) cv Dougou-won. Steaming increased significantly (P <0.05) oils absorption capacity (OAC) and bulk density (BD). However, cooking on embers decreased significantly (P <0.05) oils absorption capacity (OAC) but not affected significantly (P <0.05) bulk density (BD). The steaming time (30 min) is recommended to considerably influence the physico-functional parameters of the yam (D. bulbifera) flours cv Dougou-won.

scholarly journals Comparative nutritional and functional properties of selected underutilized legumes

2020 ◽  
Vol 45 (3) ◽  
Author(s):  
K. O. Soetan ◽  
A. A. Adeola
Keyword(s):  
Water Absorption ◽  
Bulk Density ◽  
Functional Properties ◽  
Absorption Capacity ◽  
Phaseolus Lunatus ◽  
International Institute ◽  
Oil Absorption ◽  
Water Absorption Capacity ◽  
Crude Fibre ◽  
Emulsion Capacity

Underutilized and neglected legumes have numerous nutritional potentials with great contributions to food security but they are usually excluded from research and development agenda. This study evaluates the nutritional and functional properties of six different underutilized and neglected legumes; Lima bean (LB) (Phaseolus lunatus) (2006-009), Bambara groundnut (BG) (Vigna subterranea) (TVSU- 1482), winged bean (WB) (Psophocarpus tetragonolobus) (Tpt-48), jack bean (JB) (Canavalia ensiformis) (Tce-4), sword bean (SB) (Canavalia gladiata) (Tcg-4) and African yam bean (AYB) (Sphenostylis stenocarpa) (TSS-95) from the Genetic Resources Unit (GRU), International Institute of Tropical Agriculture (IITA), Ibadan, Oyo State, Nigeria. Nutritional and functional properties were evaluated using proximate composition, mineral analyses and functional properties like bulk density, water absorption capacity, oil absorption capacity, emulsion capacity and dispersibility. All the procedures were carried out using standard protocols. Statistical analysis was done using descriptive statistics. Results of proximate analysis showed that crude protein ranged from18.88 0.15%(WB) to 26.60±0.14%(AYB), crude fat ranged from 1.84 0.02% (JB) to 6.39 0.03% (BG), crude fibre ranged from 3.70 ±0.00% (AYB) to 5.04 0.03% (SB), ash ranged from 3.10 ± 0.14% (AYB) to 4.66 0.02% (LB), nitrogen free extract ranged from 55.60 0.04% (SB) to 62.97 0.12% (WB), moisture content ranged from 5.75 0.48% (AYB) to 10.77 0.03% (JB), dry matter ranged from 89.23 0.03% (JB) to 94.25 ± 0.488% (AYB) and gross energy ranged from 4.39 0.003 kcal/g (SB) to 4.66 0.00 (BG). Mineral content results revealed that calcium varied from 0.14 0.000% (LB) to 0.23 0.0003% (AYB), phosphorus varied from 0.20 0.0001% (AYB) to 0.38 0.00% (BG), sodium varied from 0.12 0.00% (LB and WB) to 0.35 0.0006% (AYB), potassium varied from 0.69 0.00% (LB) to 1.12 0.00% (BG), magnesium varied from 0.15 0.0002% (AYB) to 0.27 0.000% (BG) and iron varied from 44.84 0.03 (mg/g) (WB) to 80.98 0.0007(mg/g) (AYB). Results of functional properties showed that bulk density ranged from 0.45±0.04 g/mL (WB) to 0.77±0.08 g/mL (SB), water absorption capacity ranged from 168.33±0.03 g/100g (LB) to 183.62±0.01 g/100g (SB), oil absorption capacity ranged from 146.54 ±0.02 g/100g (LB) to 161.55±0.02 g/100g (JB), emulsion capacity ranged from 79.67 ±0.02 g/100g (LB) to 89.46±0.02 g/100g (SB) and dispersibility ranged from81.0±1.41%(SB) to 86.5±0.71% (BG). The study concluded that all the underutilized legumes have varying nutritional and functional properties, which should be exploited for nutritional benefits and industrial applications, as a solution to the problem of food shortage, especially in the developing countries.

scholarly journals Characterization of Two Chickpea Varieties and the Effect of Cooking on their Physico-chemical and Functional Properties of Flours

2016 ◽  
Vol 5 (5) ◽  
pp. 67
Author(s):  
Victoria G. Aguilar-Raymundo ◽  
Jorge F. Vélez-Ruíz
Keyword(s):  
Functional Properties ◽  
Wide Distribution ◽  
Pasting Properties ◽  
Absorption Capacity ◽  
Water Absorption Capacity ◽  
Moisture Contents ◽  
Physico Chemical ◽  
Significant Difference ◽  
Physicochemical And Functional Properties

Considering the nutritional and functional characteristics of chickpea, flours of two varieties of chickpea (“Blanco Noroeste” and “Costa 2004”) were prepared to know the effect of cooking. Thus the objective of this study was to compare their physicochemical and functional properties in both, raw and cooked flours. Physical properties of the grain, for the two varieties were similar, whereas the physicochemical and functional properties of the flours exhibited differences as a function of the variety and the processing. The chickpea cooked flours showed lower lightness and higher redness and yellowness with respect to raw flours. The proximal composition of cooked flours presented significant differences in fat (5.98% - 6.09%) and moisture contents (0.48% - 0.54%) with respect to raw flours. The particle size distribution determined for the raw and cooked flours samples, indicated a unimodal behavior with a wide distribution. The water absorption capacity and oil capacity showed significant difference among flour varieties. For pasting properties, a higher viscosity was measured for Costa 2004 (380 cP) and Blanco Noroeste (272 cP) raw flours, raw flour exhibited better pasting properties than cooked flours. 

Effect of Fermentation on Antinutritional Factors and Functional Properties of Fermented Bambara Nut Flour

2019 ◽  
pp. 1-5
Author(s):  
O. I. Ola ◽  
S. O. Opaleye
Keyword(s):  
Water Absorption ◽  
Functional Properties ◽  
Trypsin Inhibitor ◽  
Antinutritional Factors ◽  
Absorption Capacity ◽  
Composite Flour ◽  
Local Market ◽  
Water Absorption Capacity ◽  
Swelling Power ◽  
University Of Technology

Bambara nut (Vigna subterrenean) is a cheap source of leguminous protein that can be a good substitute for relatively expensive animal protein to reduce malnutrition. Despite its potentials, it remains underutilized owing in part to long cooking time, presence of antinutritional factors and drudgery in dehulling. In this regard, this study determined effects of fermentation on antinutritional and functional properties of bambara nut flour. Bambara nut was procured from local market in Abeokuta while pure culture of Rhizopus oligosporous was obtained at the Department of Food Science and Engineering, Ladoke Akintola University of Technology. Bambara nut was fermented for 12, 24, 36, 48, 60 and 72h at 32ºC and dried in oven (55ºC/24 h). The antinutritional (tannin, oxalate, phytate, and trypsin inhibitor) and functional properties (water-absorption-capacity, solubility and swelling power) of the composite flour were determined. The data obtained were subjected to descriptive and inferential statistics and significance established at P=.05. Respective range of values for tannin, oxalate, phytate and trypsin inhibitor were 0.08 - 0.32, 0.72 - 1.49, 0.15 - 3.64 and 0.42 - 3.25 mg/g, respectively. Water absorption capacity, solubility and swelling power ranged from 8.67 - 11.04, 52.59 - 53.07, 9.20 - 10.16 and 9.14 9.16%,  respectively. The fermentation process reduced the antinutritional factors and increased the protein content.

Effects of Extraction Conditions on the Functional Properties of Bambara Bean Protein Concentrates

2016 ◽  
Vol 12 (2) ◽  
pp. 195-201 ◽  
Author(s):  
Martin A. Mune Mune ◽  
Armand A. Bouba ◽  
Samuel R. Minka
Keyword(s):  
Functional Properties ◽  
Water Solubility ◽  
Protein Extraction ◽  
Absorption Capacity ◽  
Water Absorption Capacity ◽  
Emulsifying Activity ◽  
Protein Concentrates ◽  
Nacl Concentration ◽  
Maximum Water ◽  
Bean Protein

Abstract Functional properties of Bambara bean protein concentrates (BPCs), as a function of extraction pH and NaCl concentration, were investigated. The results showed that protein content of the concentrates ranged between 69.27% and 74.40%. The addition of NaCl during protein extraction favourably affected water solubility index particularly at pH 10–11. Moreover, the maximum water absorption capacity (4.28 g/g) and oil-holding capacity (OHC) (2.50 g/g) were recorded at extraction pH 11 and in the absence of NaCl. It was also noticed that protein extraction at pH 8–10 was not recommended for applications where high OHC is required. BPCs presenting high emulsifying activity were prepared at NaCl concentration of 0.5 M and pH 7, and at pH 11 without NaCl. Finally, foaming ability (FA) increased with NaCl concentration, and the maximum FA was recorded at pH 7 (114%).

scholarly journals Nutrient Composition and Functional Properties of Fonio (Digetaria exilis) and Amaranth (Amaranthus cruentus) Flour Blends

2020 ◽  
pp. 53-62
Author(s):  
J. A. Ayo ◽  
E. Okoye
Keyword(s):  
Functional Properties ◽  
Absorption Capacity ◽  
Nutrient Composition ◽  
Vitamin B3 ◽  
Crude Fibre ◽  
Amaranthus Cruentus ◽  
Swelling Capacity ◽  
Amaranth Flour ◽  
Flour Blends ◽  
Flour Blend

This study investigated the nutrient composition and functional properties of flour blend of acha and amaranth grains. The amaranth flour was substituted into acha flour at 5, 10, 15, and 20% and to produce acha-amaranth flour blend. The chemical composition and functional properties of the flour blend were determined. The protein, crude fibre, fat and ash content ranged from 7.66 - 12.93, 0.44 - 0.59, 0.15 - 1.01, and 0.11 - 0.96% with increase in added amaranth grain flour (0-20%). The moisture content and carbohydrate ranged from 12.46 – 11.7, 77.41 - 4.33% and decreased with increasing added amaranth flour.   The potassium, magnesium, phosphorus, vitamin B3, vitamin E and vitamin B6 content ranged from 0.09 - 0.14, 0.06 - 0.12, 0.19 - 0.34.14 - 0.24,  0.39 - 0.75 and 0.54- 0.69 mg/100 g increase with increasing in amaranth flour. The bulk density, swelling capacity ranged from 0.79 - 0.76 g/cm3 and 295.00 -275.00 ml/g, respectively with increases in added amaranth flour. The water absorption capacity, oil absorption capacity and foaming capacity ranged from  120.00  – 145.00, 110.00  – 135.00,  0.06  - 0.09, ml/g, respectively, with increasing acha substitution using amaranth flour. the 20% amaranth flour addition had the highest values of protein, fat, ash and crude fiber at 7.66 - 12.93, 0.44 - 0.59, 0.15 - 1.01, and 0.11 - 0.96% respectively. Amaranth incorporation had significant effects and contributed to the improvement of the flour blend. 

Sign in / Sign up

Export Citation Format

Share Document