scholarly journals Sistem Pendukung Keputusan Model Fuzzy AHP Dalam Pemilihan Kualitas Perdagangan Batu Mulia

Author(s):  
Sri Wahyuni ◽  
Sri Hartati

AbstrakPemilihan kualitas batu mulia membutuhkan kemampuan khusus untuk memilih dan menilai kualitas batu mulia yang akan diperdagangkan. Keberagaman jenis batu mulia dan konsumen menjadi kendala tersendiri ketika pengetahuan dan kemampuan individu dalam menganalisis kualitas batu mulia sangatlah minim.Penelitian ini menggunakan metode kuantitatif dengan menggunakan model Fuzzy AHP. Pengumpulan data dilakukan dengan cara konsultasi dengan Direktur Kantor Pusat Promosi Batu Mulia Indonesia GEM-AFIA GROUP  di Bandung sehingga dihasilkan kriteria-kriteria terbaik dalam pemilihan kualitas perdagangan batu mulia. Kriteria-kriteria tersebut kemudian disusun berdasarkan literatur, observasi dan wawancara, selanjutnya diberi penilaian perbandingan berpasangan dengan AHP untuk mencari bobot informasional dan menggunakan TFN untuk mencari upper excepted value.Hasil yang didapat dengan menggunaan model Fuzzy AHP dalam pemilihan kualitas perdagangan batu mulia menunjukkan bahwa kriteria berat jenis, warna, kekerasan, pemotongan, dan kejernihan merupakan kriteria utama dalam pemilihan kualitas perdagangan batu mulia. Fuzzy AHP dalam penilaian tingkat kosistensi dilakukan pada level struktur hierarki dan mampu mengakomodir ketidak konsistenan dalam penilaian. Kata kunci—AHP (Analysis Hierarchy Process), Fuzzy AHP, TFN (Triangular Fuzzy Number), upper eecepted upper. AbstractThe selection process of Precious stone quality requires particular ability in selecting and assessing the quality of traded Precious stones . The diversity types of Precious stoneand consumers in choosing it become an obstacle since the limited knowledge and ability to analyze needs of individuals.This research applied quantitative method by employing Fuzzi AHP model. The data was collected by consulting the director of  Kantor Promosi Batu Mulia Indonesia GEMAFIA GROUP located in Bandung that gives some criteria in the selection of Precious stonetrade quality. Further, these criteria are formulated based on AHP pair comparison to find out the informational quality and upper expected values using TFT (triangular Fuzzy Number).The result that is based on Fuzzy AHP method show that density, color, hardness, cutting and clarity criteria are the criteria in selecting Precious stonetrade quality.  This method in the assessment of consistency level is done in the hierarchy structure level and is able to accommodate the assessment inconsistency. Keywords—AHP (Analysis Hierarchy Process), Fuzzy AHP, TFN (Triangular Fuzzy Number),  upper eecepted upper.

2018 ◽  
Vol 2018 ◽  
pp. 1-6 ◽  
Author(s):  
Mochammad Sobandi Dwi Putra ◽  
Septi Andryana ◽  
Fauziah ◽  
Aris Gunaryati

The selection of quality gemstones requires a special ability to select and assess the quality of gemstones to be traded. The diversity of types of gemstones and consumers becomes an obstacle in itself when the knowledge and ability of individuals to analyze the quality of gemstones is minimal. The decision-making method used is Fuzzy Analytical Hierarchy Process (F-AHP) method which is widely used in various sectors. F-AHP is easy to adapt to many decision issues; the research proposes a decision-making system using the F-AHP algorithm to analyze the quality of gemstones. The results obtained with the use of F-AHP model in the selection of quality gemstones show the highest quality of gemstones of all stones compared, Rubi 1, with a weight value of 0.152942.


2011 ◽  
Vol 243-249 ◽  
pp. 4302-4306
Author(s):  
Ji Feng Liang ◽  
Xie Dong Zhang ◽  
Lei Wu

Based on a comprehensive analysis of the influencing factors and special features of cement concrete pavement overlaying technology, a fuzzy analytic hierarchy process (AHP) model is constructed for the comparison and selection of overlaying schemes. At first, the numerical weight for each criterion of the hierarchy is derived and tested. Then the feature matrices of all the schemes are constructed based on experts’ evaluation. The optimal scheme is chosen according to the numerical priorities of each scheme yielded by fuzzy calculation.


Author(s):  
Putu Praba Santika ◽  
I Putu Susila Handika

To get good employees, a good selection process is needed. From the results of the interview, PT. Global Retailindo Pratama uses four criteria for the selection of new employees, education, intelligence, experience, and interviews. All prospective employees must take an exam to measure the criteria of education and intelligence and also have to send a photocopy of proof of their experience. The first stage selection is done to determine the prospective applicants who will take part in the interview. The second stage is conducted to determine the prospective employees who are accepted. The process of assessment and selection is still done by humans, so it takes a lot of time and energy. This problem can be solved by providing an information system for submitting applications and conducting examinations online. All documents are sent in digital form, also automaticlly checking answers from prospective employees. To select prospective employees, a method is needed that can recommend potential prospective employees based on specified criteria. The TOPSIS method is a decision support method that can provide recommendations in accordance with the criteria. The disadvantage of the TOPSIS method is that it requires weighting in the ranking process. The Analytical Hierarchy Process (AHP) method can be used to determine the criteria weight. Combining AHP and TOPSIS methods can produce more objective ranking results. Combining the AHP and TOPSIS methods can produce better recommendations.


Author(s):  
Agus Salim ◽  
Baginda Oloan Lubis

Rice is one of the staple foods of society in general, the need for rice supply is increasing every year. The increasing population in the Jababeka area is a threat to staple food supplies. To determine the selection of Rice Brands, it takes rice criteria in order to determine the best quality of rice, and increase sales. So that it can meet consumer needs for rice. In the selection of rice brands at CV Beras Alami  uses a voting system, this is clearly less valid in its election because it is subjective. Analytical Hierarchy Process (AHP) method is used as a method for decision making, as a solution in selecting rice brands in CV Beras Alami. The Expert Choice application is used as a support system to facilitate the selection of rice brands that are in demand by consumers. The results can be known during the 2018 period that rice is widely consumed is Garuda Utama.


2011 ◽  
Vol 181-182 ◽  
pp. 987-992 ◽  
Author(s):  
Jian Cao ◽  
Feng Tang ◽  
Qing Xu

To solve partner selection problems under enterprise’s green operation strategy nowadays, a new fuzzy-AHP method based on the AHP and basic theory of the triangular fuzzy number was given. Moreover, the evaluation hierarchy structure and corresponding evaluation process were described. Compared with traditional AHP approach, the proposed model combines subjective analysis with quantitative analysis more reasonably, synthesizes group opinions more adequately. The method can be practiced easily and widely, mainly because of the model’s simple, normative arithmetic formulas and the consistency of triangular-fuzzy-number-based judgment matrices. The results of a case study on selecting fabric suppliers in a middle-scale clothing enterprise indicate that, by applying the method-based software system, fair and reasonable conclusions under group decision-making environment can be acquired clearly.


Author(s):  
Rajbir Singh Bhatti ◽  
Pradeep Kumar ◽  
Dinesh Kumar

Selection of service providers in the global supply chains of today has been recognized as having a very important effect on the competitiveness of the entire supply chain. It results in achieving high quality end results (products and/or services), at reasonable cost coupled with high customer satisfaction. This article discusses the use of Fuzzy Analytic Hierarchy Process (FAHP) to effectively manage the qualitative and quantitative decision factors which are involved in the selection of providers of 3PL services under Lead Logistics Provider (LLP) environments of today. Lead logistics providers (LLP) are increasingly being banked upon to integrate the best of 3PL service providers and allow for synchronized and optimized operations. In the asset free environments of today, many a times, the LLP uses the services of the 3PL and hence the issue of reliably choosing them assumes increasingly greater significance. The fuzzy-AHP has been adequately demonstrated in literature to be an effective tool which can be used to factor-in the fuzziness of data. Triangular Fuzzy Numbers (TFN) have been deployed to make over the linguistic comparisons of criteria, sub-criteria and the alternatives. The FAHP based model formulated in this chapter is applied to a case study in the Indian context using data from three leading LSPs with significant operating leverages in the province of Uttrakhand (India). The proposed model can provide the guidelines and directions for the decision makers to effectively select their global service providers in the present day competitive logistics markets.


2011 ◽  
Vol 421 ◽  
pp. 595-600 ◽  
Author(s):  
Zhi Tao Xu ◽  
X. G Ming ◽  
Zhen Yong Wu ◽  
Wen Yan Song ◽  
Li Na He ◽  
...  

The paper put forward a method for the evaluation of multi-supplier quality competitiveness (MSQC) based on Triangular Fuzzy Number-Analytic Hierarchy Process (TFN-AHP) method with the purpose of distinguishing the evaluation between new material of new supplier, new material of old supplier, old material of new supplier and old material of old supplier and in the index configuration, the index weight and the unique evaluation results analysis. The method borrowed can not only used for MSQC comparison, but also for strengths and weaknesses analysis of MSQC. It is a dynamic evaluation method aiming for continuous improvement of supply quality management.


2020 ◽  
Vol 9 (1) ◽  
pp. 32-43
Author(s):  
Rifa Nurafifah Syabaniah ◽  
Agung Wibowo ◽  
Eva Marsusanti

The process of selecting a drawing coloring tool in one of the Cianjur city painting studios takes a long time, because the child must first try each type of drawing coloring tool. based on this problem discussed about the selection of coloring tools for beginners by using the Analytic Hierarchy Process (AHP) and Product Weight (WP) methods.  AHP test results obtained five criteria, namely comfort, convenience, safety, color quality and product quality of the ten recommended criteria based on observations and interviews. The five criteria are used as criteria for determining the selection of drawing tools for crayons, colored pencils, watercolors, markers, and oil pastels. the final result of the calculation of the Analytical Hierarchy Process (AHP) method shows that crayons are the most important alternative with a weight value of 0.20. while the test results of the Weighted Product (WP) method conclude that the brand code V4 is the crayon product brand chosen because the brand code V4 has the highest alternative value of the other ten products namely V4 = 0.118.  


Author(s):  
M. MAHAPUTRA HIDAYAT ◽  
SYARIFUL ALIM ◽  
DHANU BUDI PANGESTU

For the selection of employees, there are usually many factors in fulfilling the assessment in order to get a maximum target. Especially in the field of call centers, it is required to have qualified skills which can solve problems complained of by customers. So that as a call center who receives incoming calls or can be called inbound calls, it must be the key to solving problems and be able to convey good suggestions. However, to get the value of the agent so that its performance is good, there are parameters that must be achieved, namely acd call, acd time, aux time, available time, staffed time and agent skill. best. By doing this, the monitoring system is very easy and more efficient to find out which agents are underperforming or agents who have reached the performance target. For this reason, an application with a case study was created in order to achieve the maximum target. This application will greatly help the team, namely Teamleader, Taber, Spv, Manager as they play an important role in evaluating agents in their performance.


Author(s):  
Awaluddin Awaluddin ◽  
Retantyo Wardoyo

Abstrak— Tingginya jumlah kematian ibu dan anak menempatkan Indonesia di rangking teratas kawasan Asia Tenggara.Penelitian yang dilakukan untuk mengurangi jumlah angka kematian ibu dan anak yaitu penyedian sarana dalam hal ini klinik bersalin disuatu daerah, demi tercapainya Milenium Development Goals (MDGs) di tahun 2015.Pengumpulan data yang mendukung penelitian ini, yaitu melakukan  konsultasi dengan kepala Dinas Kesehatan Sulawesi Selatan sehingga dihasilkan kriteria-kriteria terbaik dalam pendirian klinik bersalin. Kriteria-kriteria tersebut disusun berdasarkan studi literatur, observasi, dan wawacara.Selanjutnya kriteria tersebut diberi penilaian perbandingan berpasangan dengan AHP untuk mencari bobot prior dengan skala penilaian antara 1 – 9, sedangkan untuk mencari bobot informasional dan upper excepted value menggunakan TFN (Triangular Fuzzy Number).Hasil yang didapat dengan menggunakan Fuzzy AHP non-additive dalam pendirian klinik bersalin menunjukkan bahwa kriteria prevalensi, penduduk, kesakitan, petugas, dan sarana merupakan kriteria utama dalam pendirian klinik besalin. Metode Fuzzy AHP non-additive didalam penilaian tingkat konsistensi dilakukan pada setiap level struktur hirarki dan mampu mengakomodir ketidak konsistenan dalam penilaian.Kata Kunci— AHP(Analitycal Hierarchy Process), non-additive, TFN (Triangular Fuzzy Number), upper excepted value.


Sign in / Sign up

Export Citation Format

Share Document