scholarly journals AN EVALUATION OF ROCK SLOPE STABILITY USING LIMIT EQUILIBRIUM ANALYSES

2015 ◽  
Vol 6 (2) ◽  
Author(s):  
Faridha Aprilia ◽  
I Gde Budi Indrawan
Keyword(s):  
Slope Stability ◽  
Rock Slope ◽  
Limit Equilibrium ◽  
Rock Slope Stability ◽  
Rock Slopes ◽  
Plane Failure ◽  
General Limit ◽  
The Stability ◽  
Equilibrium Analyses ◽  
Limit Equilibrium Analyses

The stability of rock slopes is controlled by several factors, such as the intact rock strength, discontinuity characteristics, groundwater condition, and slope geometry. Limit equilibrium (LE) analyses have been commonly used in geotechnical practice to evaluate the stability of rock slopes. A number of methods of LE analyses, ranging from simple to sophisticated methods, have been developed. This paper presents stability analyses of rock slopes at the Batu Hijau open mine in Sumbawa Barat using various methods of LE analyses. The LE analyses were conducted at three cross sections of the northern wall of the open mine using the Bishop Simplified, Janbu Simplified, Janbu Generalised, and General Limit Equilibrium (GLE) methods in Slide slope stability package. In addition, a Plane Failure (PF) analysis was performed manually. Shear strength data of the discontinuity planes used in the LE analyses were obtained from back analyses of previous rock slope failures. The LE analysis results showed that the rock slopes were likely to have shallow non-circular critical failure surfaces. The factor of safety (Fs) values obtained from the Bishop Simplified, Janbu Simplified, Janbu Generalised, and GLE methods were found to be similar, while the Fs values obtained from the PF method were higher than those obtained from the more rigorous methods. Keywords: Batu Hijau mine, Bishop Simplified, Janbu Simplified, Janbu Generalised, limit equilibrium analyses, general limit equilibrium, rock slope stability, plane failure.

APPLICATION OF BLOCK THEORY MODELING ON SPATIAL BLOCK TOPOLOGICAL IDENTIFICATION TO ROCK SLOPE STABILITY ANALYSIS

2013 ◽  
Vol 11 (01) ◽  
pp. 1350044 ◽  
Author(s):  
SHUHONG WANG ◽  
PENGPENG NI
Keyword(s):  
Stability Analysis ◽  
Slope Stability ◽  
Rock Slope ◽  
Limit Equilibrium ◽  
Slope Stability Analysis ◽  
Rock Slope Stability ◽  
Rock Slopes ◽  
Block Theory ◽  
Joint Plane ◽  
Identification Techniques

Rock slopes stability has been one of the fundamental issues facing geotechnical engineering researchers. Due to the pre-existing joints, the intactness of the rock is weakened. The mechanical characteristics are changed correspondingly along with joint-induced stress redistribution within the rock mass if the sliding limit at the joint or part of it is exceeded. In this study, spatial block topological identification techniques are applied to distinguish all blocks cut by 3D finite random or fixed discontinuities. Based on the available photographic information of rock slopes, the sliding forces and the corresponding factor of safety are evaluated through limit equilibrium conditions by the classic block theory. The rock slope stability analysis software, GeoSMA-3D (Geotechnical Structure and Model Analysis), satisfying the requirements of spatial block modeling, joint plane simulation, key block identification and analysis and sliding process display, was developed. The application of such a software on the analysis of a rock slope, which is located near the inlet of Daiyuling No. 1 tunnel on the Zhuanghe–Gaizhou highway networks, was performed. The assessed results were compared with the monitored data to validate the effectiveness of such software.

scholarly journals Stability Assessment of High and Steep Cutting Rock Slopes with the SSPC Method

2021 ◽  
Vol 2021 ◽  
pp. 1-10
Author(s):  
Hongliang Tao ◽  
Guangli Xu ◽  
Jingwen Meng ◽  
Ronghe Ma ◽  
Jiaxing Dong
Keyword(s):  
Slope Stability ◽  
Rock Slope ◽  
Equilibrium Analysis ◽  
Rock Slope Stability ◽  
Rock Slopes ◽  
Evaluation Indexes ◽  
Weathering Degree ◽  
Slope Rock ◽  
The Stability

The stability of high rock slopes has become a key engineering geological problem in the construction of important projects in mountainous areas. The original slope stability probability classification (SSPC) system, presented by Hack, has made obvious progress and been widely used in rock slope stability analysis. However, the selection and determination of some evaluation indexes in the original SSPC method are usually subjective, such as intact rock strength and weathering degree. In this study, the SSPC method based on geological data obtained in the prospecting tunnels was presented and applied. According to the field survey and exploration of the prospecting tunnels, the weathering degree of the slope rock mass was evaluated. The empirical equation for the maximum stable height of the slope was applied to the slope stability evaluation in the presented SSPC method. Then, the slope stability probability of numerous cutting slopes in the sandstone unit was evaluated using the presented system. Results of the Geostudio software based on the limited equilibrium analysis of the investigated slopes were compared with the results obtained by the SSPC method. The results indicate that the SSPC method is a useful tool for the stability prediction of high and steep rock slopes.

scholarly journals ENGINEERING GEOLOGICAL ASSESSMENT OF THE ROCK SLOPE STABILITY ALONG THE PROPOSED LERABIRE ROAD IN THE MERGASUR CITY, KURDISTAN, IRAQ

2020 ◽  
Vol 53 (2F) ◽  
pp. 65-82
Author(s):  
Rebaz Qader
Keyword(s):  
Slope Stability ◽  
Rock Slope ◽  
Slope Angle ◽  
Rock Slope Stability ◽  
Rock Slopes ◽  
Stability Of Slopes ◽  
The Stability ◽  
High Degree ◽  
Marly Limestone ◽  
Failure Possibility

The study of slope stability along the proposed Lerabire road in the Mergasur town, in Erbil city, Kurdistan region of NE-Iraq is carried out. To evaluate the stability of slopes, twenty stations were selected along the mentioned road, two stations in the rock slopes of the Shiranish Formation, eleven stations in the Bekhme Formation, six stations in the Qamchuqa Formation, and one station in the Sarmord Formation. In this study, the stability of rock slopes has been evaluated by the Landslide Possibility Index system. The results of the Landslide Possibility Index category in the rock slopes along the proposed Lerabire road ranges from a very low to low for rock slopes in stations 1 and 2 (marl and marly limestone of the Shiranish Formation, Moderate for rock slopes in stations 3, 4 and 19 (limestone of the Bekhme Formation), High for rock slopes in the stations 5, 6, 7, 8, 9, 10, 11 (limestone of the Bekhme Formation), stations 12, 17 (limestone and marly limestone of the Qamchuqa Formation), station 20 (limestone of the Sarmord Formation and very high for rock slopes in the stations 13, 14, 15, 16 (limestone and marly limestone of the Qamchuqa Formation), station 18 (limestone of the Bekhme Formation). According to Landslide Possibility Index category, the hazard category is Low in station 1 in the Shiranish Formation, but in station 2, 3, 4 and 19 are Moderate, moreover, in the station 5, 11, 12, 17, 18 and 20 are high. The rock slope assessment indicated that the height of the slope face, slope angle, a high degree of weathering, and discontinuities spacing are the factors that increase the failure possibility. To prevent landslide the ditch method is used in the Shiranish Formation rock slopes, the reinforcement techniques are used in the Behkme Formation rock slopes and rock removal methods are used in Qamchuqa and Sarmord Formation rock slopes.

scholarly journals Assessment of Slope Instability and Risk Analysis of Road Cut Slopes in Lashotor Pass, Iran

2014 ◽  
Vol 2014 ◽  
pp. 1-12 ◽  
Author(s):  
Mohammad Hossein Taherynia ◽  
Mojtaba Mohammadi ◽  
Rasoul Ajalloeian
Keyword(s):  
Rock Mass ◽  
Risk Analysis ◽  
Rock Slope ◽  
Classification Systems ◽  
Slope Instability ◽  
Rock Slope Stability ◽  
Rock Slopes ◽  
The Stability ◽  
Cut Slopes ◽  
Road Cut Slopes

Assessment of the stability of natural and artificial rock slopes is an important topic in the rock mechanics sciences. One of the most widely used methods for this purpose is the classification of the slope rock mass. In the recent decades, several rock slope classification systems are presented by many researchers. Each one of these rock mass classification systems uses different parameters and rating systems. These differences are due to the diversity of affecting parameters and the degree of influence on the rock slope stability. Another important point in rock slope stability is appraisal hazard and risk analysis. In the risk analysis, the degree of danger of rock slope instability is determined. The Lashotor pass is located in the Shiraz-Isfahan highway in Iran. Field surveys indicate that there are high potentialities of instability in the road cut slopes of the Lashotor pass. In the current paper, the stability of the rock slopes in the Lashotor pass is studied comprehensively with different classification methods. For risk analyses, we estimated dangerous area by use of the RocFall software. Furthermore, the dangers of falling rocks for the vehicles passing the Lashotor pass are estimated according to rockfall hazard rating system.

scholarly journals Stability assessment of degrading permafrost rock slopes based on a coupled thermo-mechanical model

2020 ◽  
Author(s):  
Philipp Mamot ◽  
Samuel Weber ◽  
Saskia Eppinger, ◽  
Michael Krautblatter
Keyword(s):  
Slope Stability ◽  
Rock Slope ◽  
Fracture Network ◽  
Slope Instability ◽  
Rock Slope Stability ◽  
Permafrost Degradation ◽  
Rock Slopes ◽  
High Mountains ◽  
Permafrost Rock ◽  
Wide Range

Abstract. In the last two decades, permafrost degradation has been observed to be a major driver of enhanced rock slope instability and associated hazards in high mountains. While the thermal regime of permafrost degradation in high mountains has already been intensively investigated, the mechanical consequences on rock slope stability have so far not been reproduced in numerical models. Laboratory studies and conceptual models argue that warming and thawing decrease rock and discontinuity strength and promote deformation. This study presents the first general approach for a temperature-dependent numerical stability model that simulates the mechanical response of a warming and thawing permafrost rock slope. The proposed procedure is applied to a rockslide at the permafrost-affected Zugspitze summit crest. Laboratory tests on frozen and unfrozen rock joint and intact rock properties provide material parameters for the discontinuum model developed with the Universal Distinct Element Code (UDEC). Geophysical and geotechnical field surveys deliver information on the permafrost distribution and fracture network. The model demonstrates that warming decreases rock slope stability to a critical level, while thawing initiates failure. A sensitivity analysis of the model with a simplified geometry and warming trajectory below 0 °C shows that progressive warming close to the melting point initiates instability above a critical slope angle of 50–62°, depending on the orientation of the fracture network. The increase in displacements intensifies for warming steps closer to zero degree. The simplified and generalised model can be applied to permafrost rock slopes (i) which warm above −4 °C, (ii), with ice-filled joints, (iii) with fractured limestone or probably most of the rock types relevant for permafrost rock slope failure, (iv) with a wide range of slope angles (30–70°) and orientations of the fracture network (consisting of three joint sets). The presented model is the first one capable of assessing the future destabilisation of degrading permafrost rock slopes.

scholarly journals Discontinuous rock slope stability analysis by limit equilibrium approaches – a review

2021 ◽  
pp. 1-24
Author(s):  
Mohammad Azarafza ◽  
Haluk Akgün ◽  
Akbar Ghazifard ◽  
Ebrahim Asghari-Kaljahi ◽  
Jafar Rahnamarad ◽  
...  
Keyword(s):  
Stability Analysis ◽  
Slope Stability ◽  
Rock Slope ◽  
Limit Equilibrium ◽  
Slope Stability Analysis ◽  
Rock Slope Stability ◽  
Discontinuous Rock

scholarly journals Stability Assessment of the Excavated Rock Slope at the Dagangshan Hydropower Station in China Based on Microseismic Monitoring

2018 ◽  
Vol 2018 ◽  
pp. 1-16 ◽  
Author(s):  
K. Ma ◽  
N. W. Xu ◽  
Z. Z. Liang
Keyword(s):  
Rock Mass ◽  
Slope Stability ◽  
Monitoring System ◽  
Rock Slope ◽  
Rock Slope Stability ◽  
Hydropower Station ◽  
Bank Slope ◽  
The Stability ◽  
The Right ◽  
Dagangshan Hydropower Station

A high-resolution microseismic (MS) monitoring system was implemented at the right bank slope of the Dagangshan hydropower station in May 2010 to analyse the slope stability subjected to continuous excavation. The MS monitoring system could real-time capture a large number of seismic events occurring inside the rock slope. The identification and delineation of rock mass damage subject to excavation and consolidation grouting can be conducted based on the analysis of tempospatial distribution of MS events. However, how to qualitatively evaluate the stability of the rock slope by utilizing these MS data remains challenging. A damage model based on MS data was proposed to analyse the rock mass damage, and a 3D finite element method model of the rock slope was also established. The deteriorated mechanical parameters of rock mass were determined according to the model elements considering the effect of MS damage. With this method, we can explore the effect of MS activities, which are caused by rock mass damage subjected to excavation and strength degradation to the dynamic instability of the slope. When the MS damage effect was taken into account, the safety factor of the rock slope was reduced by 0.18 compared to the original rock slope model without considering the effect. The simulated results show that MS activities, which are subjected to excavation unloading, have only a limited effect on the stability of the right bank slope. The proposed method is proven to be a better approach for the dynamical assessment of rock slope stability and will provide valuable references for other similar rock slopes.

Rock slope stability and distributed joint systems

1992 ◽  
Vol 29 (1) ◽  
pp. 53-60 ◽  
Author(s):  
Bruce J. Carter ◽  
Emery Z. Lajtai
Keyword(s):  
Factor Of Safety ◽  
Rock Slope ◽  
Limit Equilibrium ◽  
Slope Angle ◽  
Probability Of Failure ◽  
Cumulative Distribution ◽  
Rock Slope Stability ◽  
Sensitivity Analyses ◽  
The Stability ◽  
Rock Wedge

A deterministic (GEOSLIDE) and a probabilistic (PROSLIDE) microcomputer code are introduced to aid in performing rock wedge analyses based on the limit equilibrium method. The deterministic code evaluates the stability of a single rock wedge formed by discontinuities in rock through three-dimensional vector algebra, GEOSLIDE undertakes a full kinematic analysis (daylighting and obstruction), analyzes both wedge and plane sliding, and provides for anchor designs and sensitivity analyses (cohesion, friction, and water forces). Through multiple stability analyses, PROSLIDE evaluates the probability of failure for a rock slope by examining the distribution of the factors of safety from all the potential sliding wedges formed by the discontinuities of the rock mass. The probability of failure is expressed as the ratio of kinematically free wedges that have a factor of safety less than unity to the total number of wedges, PROSLIDE can form and analyze as many as 2000 different pairs of discontinuities in less than 30 min using a 25 MHz 486 IBM-compatible computer. In a worked example, the probability of failure for a fixed slope strike and loading condition is shown to vary with the slope angle, following the characteristic 'S' shape of a cumulative distribution function. The effect of an anchor force is to spread the distribution over a wider range of the factor of safety (SF), pushing many wedges into a potential upslide situation and splitting the distribution about the failure zone of the stability diagram (−1 < SF < 1). Key words : rock slope, rock wedge, stability analysis, factor of safety, probability of failure, Monte Carlo simulation.

Sign in / Sign up

Export Citation Format

Share Document