DEVELOPMENT OF FLOATING GASTRORETENTIVE DRUG DELIVERY SYSTEM BASED ON A NOVEL EXCIPIENT FOR METFORMIN HYDROCHLORIDE USING MIXTURE DESIGN

2020 ◽  
pp. 62-71
Author(s):  
R. PAWAR ◽  
S. JAGDALE ◽  
D. RANDIVE
Keyword(s):  
Drug Release ◽  
Release Kinetics ◽  
Hydroxypropyl Methylcellulose ◽  
In Vitro Release ◽  
Mixture Design ◽  
Release Profile ◽  
Metformin Hydrochloride ◽  
Matrix Tablet ◽  
Vitro Release

Objective: The present study aimed to develop a new SR metformin hydrochloride (MH) gastroretentive formulation with novel excipient (NE), which has better floatation and can be prepared with more simple pharmaceutical techniques for the treatment of diabetes Mellitus. Methods: A gastro-retentive floating matrix tablet (GFT) formulation of MH was prepared using various concentrations of PEO (Polyox WSR-303) and hydroxypropyl methylcellulose K100M (HPMC K100 M) and Floating agent (novel excipient) to achieve desirable TFT, FLT and drug release. The wet granulation method was selected using isopropyl alcohol as a binder for the preparation of tablets. D-optimal non-simplex mixture design was used for the selection of suitable polymer concentrations and floating agents. Release kinetics was used to determine the mechanism of drug release. Results: It was observed that GFT with optimum quantities of PEO, HPMC K100M, and the floating agent showed 100 % of drug release in 24h with FT up to 24h and minimum FLT of less than 2 min. Formulation with an in vitro release profile slower to the marketed sample was prepared. Conclusion: A sustained-release (GFT) of MH tablets using PEO-, HPMC K100M, and an effervescent system was successfully prepared. AGFT formulation with an in vitro release profile slower to the marketed sample that releases MH for 24h may suitable for once-daily dosing can be prepared.

scholarly journals Design and characterization of metoprolol floating matrix tablet

2017 ◽  
Vol 4 (2) ◽  
pp. 118
Author(s):  
Vasudha Bakshi ◽  
Swapna S. ◽  
Deepa Kumari Choudhary ◽  
Ch. Revanth ◽  
B. Sai KumarCh. Praveen ◽  
...  
Keyword(s):  
Drug Release ◽  
Release Kinetics ◽  
In Vitro Release ◽  
Release Profile ◽  
In Vitro Dissolution ◽  
Matrix Tablet ◽  
Formulation Development ◽  
Drug Release Profile ◽  
Gastric Residence Time

Objective: The objective of the present research was to develop a matrix embedded floating tablet of Metoprolol for the sustained activity and prolongation of gastric residence time to improve the bioavailability of the drug. Metoprolol was chosen as a model drug because it is better absorbed in the stomach than the lower gastro intestinal tract.Methods: The experimental work was divided into pre-formulation studies, formulation development, and evaluation. Standardization of drug and excipients confirmed the authentication of the samples. Floating test were conducted for all formulations, In vitro dissolution studies were carried out in a dissolution testing apparatus-II, FTIR study was performed to interpret the drug ,excipient interaction.Results: Floating tests were also performed for 15 formulations and among them five formulations have passed the floating tests (F1, F3, F5, F7, and F14). The In-vitro release kinetics study of this tablet indicated sustained release for Metoprolol and followed zero order release and 95% drug in 8 h in vitro. The drug release profile of formulated product was compared with marketed product Metolar. The floating tablets extended the drug release up to 8 hours. The drug-polymer interaction was evaluated by fourier transform infrared spectroscopy (FTIR).Conclusions: F3 formulation showed the best floating results. The comparative study between F3 and Metolar (Marketed Product) showed the similar in vitro drug release profile. Thus, the optimzed formulation F-3 can be successfully used for the management of hypertension.

scholarly journals Release Profile of Losartan Potassium from Formulated Sustained Release Matrix Tablet

2015 ◽  
Vol 16 (2) ◽  
pp. 177-183
Author(s):  
Md Ziaur Rahman ◽  
Sayed Koushik Ahamed ◽  
Sujan Banik ◽  
Mohammad Salim Hossain
Keyword(s):  
Drug Release ◽  
Sustained Release ◽  
Release Kinetics ◽  
In Vitro Release ◽  
Methyl Cellulose ◽  
Matrix Tablets ◽  
Losartan Potassium ◽  
Matrix Tablet ◽  
Vitro Release

The present study was undertaken to develop sustained release (SR) matrix tablets of Losartan potassium, an angiotensin-II antagonist for the treatment of hypertension. The tablets were prepared by direct compression method along with Kollidon SR and Methyl Cellulose as release retardant polymers. The evaluation involves two stages- the physical properties studies of tablets and in vitro release kinetics assessment. The USP paddle method was selected to perform the dissolution test and 900 ml phosphate buffer of pH 6.8 was used as dissolution medium at 50 rpm at 370C. The release kinetics were analyzed. All the formulations followed Higuchi release kinetics. When the release data was plotted into Korsmeyer-Peppas equation, then it was confirmed that F-1, F-2, F-3, F-4 and F-5 exhibited non-fickian type drug release whereas F-6 exhibited fickian type drug release from the tablet matrix. The in-vitro release studies revealed that the formulation F-2 can be taken as an ideal or optimized formulation of sustained release tablets for 24 hours release as it fulfills all the requirements for sustained release tablet. Furthermore, when the tablets were preheated at different temperature (300C, 450C, 600C) before dissolution they showed decrease in drug release compared with ambient temperature DOI: http://dx.doi.org/10.3329/bpj.v16i2.22301 Bangladesh Pharmaceutical Journal 16(2): 177-183, 2013

scholarly journals In vitro Release Kinetics Study of Ranolazine from Swellable Hydrophilic Matrix Tablets

1970 ◽  
Vol 8 (1) ◽  
pp. 31-38 ◽  
Author(s):  
Mohammad Nezab Uddin ◽  
Ishtiaq Ahmed ◽  
Monzurul Amin Roni ◽  
Muhammad Rashedul Islam ◽  
Mohammad Habibur Rahman ◽  
...  
Keyword(s):  
Drug Release ◽  
Sustained Release ◽  
Release Kinetics ◽  
In Vitro Release ◽  
High Viscosity ◽  
Matrix Tablets ◽  
Release Studies ◽  
The Matrix ◽  
Vitro Release

The objective of this study was to design oral sustained release matrix tablets of Ranolazine usinghydroxypropyl methylcellulose (HPMC) as the retardant polymer and to study the effect of formulation factors suchas polymer proportion and polymer viscosity on the release of drug. In vitro release studies were performed usingUSP type II apparatus (paddle method) in 900 mL of 0.1N HCl at 100 rpm for 12 hours. The release kinetics wasanalyzed using the zero-order, first order, Higuchi and Korsmeyer-Peppas equations to explore and explain themechanism of drug release from the matrix tablets. In vitro release studies revealed that the release rate decreasedwith increase in polymer proportion and viscosity grade. Mathematical analysis of the release kinetics indicated thatthe nature of drug release from the matrix tablets was dependent on drug diffusion and polymer relaxation andtherefore followed non-Fickian or anomalous release. The developed controlled release matrix tablets of Ranolazineprepared with high viscosity HPMC extended release up to 12 hours.Key words: Ranolazine; Sustained release; Methocel E50 Premium LV; Methocel K100LV CR; Methocel K4M CR;Methocel K15M CR.DOI: 10.3329/dujps.v8i1.5333Dhaka Univ. J. Pharm. Sci. 8(1): 31-38, 2009 (June)

scholarly journals DESIGN AND IN VITRO/IN VIVO EVALUATION OF EXTENDED RELEASE MATRIX TABLETS OF NATEGLINIDE

2018 ◽  
Vol 7 (6) ◽  
Author(s):  
Mohini Sihare ◽  
Rajendra Chouksey
Keyword(s):  
Drug Release ◽  
Release Kinetics ◽  
In Vitro Release ◽  
Release Profile ◽  
Matrix Tablets ◽  
In Vivo Studies ◽  
Release Mechanism ◽  
In Vivo Evaluation

Aim: Nateglinide is a quick acting anti-diabetic medication whose potent activity lasts for a short duration. One of the dangerous side effects of nateglinide administration is rapid hypoglycemia, a condition that needs to be monitored carefully to prevent unnecessary fatalities. The aim of the study was to develop a longer lasting and slower releasing formulation of nateglinide that could be administered just once daily. Methods: Matrix tablets of nateglinide were prepared in combination with the polymers hydroxypropylmethylcellulose (HPMC), eudragits, ethyl cellulose and polyethylene oxide and the formulated drug release patterns were evaluated using in vitro and in vivo studies. Conclusion: Of the seventeen formulated matrix tablets tested, only one formulation labelled HA-2 that contained 15% HPMC K4M demonstrated release profile we had aimed for. Further, swelling studies and scanning electron microscopic analysis confirmed the drug release mechanism of HA-2. The optimized formulation HA-2 was found to be stable at accelerated storage conditions for 3 months with respect to drug content and physical appearance. Mathematical analysis of the release kinetics of HA-2 indicated a coupling of diffusion and erosion mechanisms. In-vitro release studies and pharmacokinetic in vivo studies of HA-2 in rabbits confirmed the sustained drug release profile we had aimed for. Keywords: Hydroxypropylmethylcellulose, Matrix tablets, Nateglinide, Sustained release

scholarly journals DESIGN AND IN VITRO EVALUATION OF EXTENDED RELEASE TABLET OF NATEGLINIDE

2018 ◽  
Vol 8 (5-s) ◽  
pp. 235-239
Author(s):  
NILESH M MAHAJAN ◽  
Kalyanee Wanaskar ◽  
Yogesh Bhutada ◽  
Raju Thenge ◽  
Vaibhav Adhao
Keyword(s):  
Drug Release ◽  
Extended Release ◽  
In Vitro Release ◽  
Matrix Tablet ◽  
Direct Compression ◽  
In Vitro Drug Release ◽  
Release Studies ◽  
Tablet Properties ◽  
Vitro Release

The aim of present study is to formulate and evaluate extended release matrix tablet of Nateglinide by direct compression method using different polymer like HPMC K4 and HPMC K15. Matrix tablet of nateglidine were prepared in combination with the polymer HPMC K4, HPMC K15, along with the excipients and the formulations were evaluated for tablet properties and in vitro drug release studies. Nateglinide matrix tablet prepared by using polymer such as HPMC K4 and HPMC K15,  it was found that HPMC K15 having higher viscosity as compare to HPMC K4 therefore different concentration of polymer were studied to extend the drug release up to 12 h. The tablets of Nateglinide prepared by direct compression had acceptable physical characteristics and satisfactory drug release. The study demonstrated that as far as the formulations were concerned, the selected polymers proved to have an acceptable flexibility in terms of in-vitro release profile. In present the study the percent drug release for optimize batch was found to 94.62%.  Hence it can be conclude that Nateglinide extended release matrix tablet can prepared by using HPMC. The swollen tablet also maintains its physical integrity during the drug release study Keywords: Tablet, in-vitro drug release, Nateglinide, HPMC

scholarly journals SODIUM ALGINATE/GELATIN MICROBEADS-INTERCALATED WITH KAOLIN NANOCLAY FOR EMERGING DRUG DELIVERY IN WILSON’S DISEASE

2019 ◽  
pp. 71-80 ◽  
Author(s):  
O. SREEKANTH REDDY ◽  
M. C. S. SUBHA ◽  
T. JITHENDRA ◽  
C. MADHAVI ◽  
K. CHOWDOJI RAO ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Drug Release ◽  
Ftir Spectroscopy ◽  
Sodium Alginate ◽  
Release Kinetics ◽  
In Vitro Release ◽  
Vitro Release ◽  
Scanning Electron

Objective: The aim of the present study was to fabricate and evaluate the drug release studies using Sodium Alginate (SA) and Gelatin (GE) microbeads intercalated with Kaolin (KA) nanoclay for sustained release of D-Penicillamine (D-PA). Methods: Sodium alginate/gelatin/Kaolin blend microbeads were prepared by an extrusion method by using glutaraldehyde (GA) as a crosslinker. The obtained microbeads were characterized by Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM) and X–ray diffraction (XRD). Drug release kinetics of the microbeads was investigated in simulated intestinal fluid (pH 7.4) at 37 °C. Results: Microbeads formation was confirmed by FTIR spectroscopy. X-RD reveals that the KA should be intercalated with the drug and also it confirms the molecular level dispersion of D-Penicillamine into microbeads. Scanning Electron Microscopy (SEM) studies reveal that the beads were in spherical shape with some wrinkled depressions on the surface. The in vitro release study indicates the D-Penicillamine released in a controlled manner. The in vitro release kinetics was assessed by Korsmeyer-Peppas equation and the ‘n’ value lies in between 0.557-0.693 indicates Non-Fickian diffusion process. Conclusion: The results suggest that the developed KA intercalated microbeads are good potential drug carrier for the controlled release of D-PA.

scholarly journals Response Surface Optimization of Sustained Release Metformin-Hydrochloride Matrix Tablets: Influence of Some Hydrophillic Polymers on the Release

2012 ◽  
Vol 2012 ◽  
pp. 1-10 ◽  
Author(s):  
Amitava Roy ◽  
Kalpana Roy ◽  
Sarbani Roy ◽  
Jyotirmoy Deb ◽  
Amitava Ghosh ◽  
...  
Keyword(s):  
Drug Release ◽  
Sustained Release ◽  
Hydroxypropyl Methylcellulose ◽  
Dissolution Kinetics ◽  
Matrix Tablets ◽  
Metformin Hydrochloride ◽  
Wet Granulation ◽  
Matrix Tablet ◽  
Response Surface Optimization

The aim of the present work was designed to develop a model-sustained release matrix tablet formulation for Metformin hydrochloride using wet granulation technique. In the present study the formulation design was employed to statistically optimize different parameters of Metformin hydrochloride tablets at different drug-to-polymer ratios employing polymers Hydroxypropyl methylcellulose of two grades K4M and K100M as two independent variables whereas the dependent variables studied were X60, X120, T50, T90, n, and b values obtained from dissolution kinetics data. The in vitro drug release studies were carried out at simulated intestinal fluids, and the release showed a non-Fickian anomalous transport mechanism. The drug release was found to reveal zero order kinetics. The granules and the tablets were tested for their normal physical, morphological, and analytical parameters and were found to be within the satisfactory levels. There were no significant drug-polymer interactions as revealed by infrared spectra. It has been found out that on an optimum increased Hydroxypropyl methylcellulose K100M concentration and decreased Hydroxypropyl methylcellulose K4M concentration the formulations were elegant in terms of their release profiles and were found to be statistically significant and generable.

Preparation of letrozole dispersed pHEMA/AAm-g-LDPE drug release system: In-vitro release kinetics for the treatment of endometriosis

2019 ◽  
Vol 179 ◽  
pp. 445-452 ◽  
Author(s):  
Akhtar Jahan Siddiqa ◽  
Nilesh Kumar Shrivastava ◽  
M.E. Ali Mohsin ◽  
Mustufa Haider Abidi ◽  
Tauqeer Ahmed Shaikh ◽  
...  
Keyword(s):  
Drug Release ◽  
Release Kinetics ◽  
In Vitro Release ◽  
Release System ◽  
Drug Release System ◽  
Vitro Release

scholarly journals Formulation and Evaluation of Gabapentin Sustained Release Matrix Tablet Using Hibiscus rosa sinensis Leaves Mucilage as Release Retardant

2021 ◽  
pp. 564-572
Author(s):  
P. Amsa ◽  
G. K. Mathan ◽  
S. Magibalan ◽  
E. K. Velliyangiri ◽  
T. Kalaivani ◽  
...  
Keyword(s):  
Drug Release ◽  
Sustained Release ◽  
Release Kinetics ◽  
In Vitro Release ◽  
Magnesium Stearate ◽  
Matrix Tablets ◽  
Wet Granulation ◽  
Matrix Tablet ◽  
Hibiscus Rosa Sinensis

The major goal of this study was to develop and evaluate Sustained release matrix tablets of Gabapentin with Hibiscus rosa - sinensis leaves mucilage prepared by using wet granulation technique with microcrystalline cellulose as a diluents and magnesium stearate as a lubricant. Pre-compression and post-compression evaluation of physicochemical parameters were carried out and to be within acceptable limits. Drug and polymer compatibility were validated by FTIR measurements. Further, tablets were evaluated for in vitro release study. To get the sustained release of Gabapentin, the concentration of Hibiscus rosa- sinensis mucilage was tuned with a gas-generating agent. The % drug release of all formulation from F1 to F5 showed 91.24%, 80.24%, 70.53%, 62.12% and 49.83% respectively. All the dosage form release kinetics was computed using zero order, first order, Higuchi, and Korsmeyer–Peppas methods. From the above results, it is concluded that the n value of formulation F5 showed 0.78 suggesting anomalous (non-fickian) behavior of the drug. Mucilage from the leaves of Hibiscus rosa-sinensis has a great retarding effect in drug release from sustained release tablets.

Sign in / Sign up

Export Citation Format

Share Document