scholarly journals SODIUM ALGINATE/GELATIN MICROBEADS-INTERCALATED WITH KAOLIN NANOCLAY FOR EMERGING DRUG DELIVERY IN WILSON’S DISEASE

2019 ◽  
pp. 71-80 ◽  
Author(s):  
O. SREEKANTH REDDY ◽  
M. C. S. SUBHA ◽  
T. JITHENDRA ◽  
C. MADHAVI ◽  
K. CHOWDOJI RAO ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Drug Release ◽  
Ftir Spectroscopy ◽  
Sodium Alginate ◽  
Release Kinetics ◽  
In Vitro Release ◽  
Vitro Release ◽  
Scanning Electron

Objective: The aim of the present study was to fabricate and evaluate the drug release studies using Sodium Alginate (SA) and Gelatin (GE) microbeads intercalated with Kaolin (KA) nanoclay for sustained release of D-Penicillamine (D-PA). Methods: Sodium alginate/gelatin/Kaolin blend microbeads were prepared by an extrusion method by using glutaraldehyde (GA) as a crosslinker. The obtained microbeads were characterized by Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM) and X–ray diffraction (XRD). Drug release kinetics of the microbeads was investigated in simulated intestinal fluid (pH 7.4) at 37 °C. Results: Microbeads formation was confirmed by FTIR spectroscopy. X-RD reveals that the KA should be intercalated with the drug and also it confirms the molecular level dispersion of D-Penicillamine into microbeads. Scanning Electron Microscopy (SEM) studies reveal that the beads were in spherical shape with some wrinkled depressions on the surface. The in vitro release study indicates the D-Penicillamine released in a controlled manner. The in vitro release kinetics was assessed by Korsmeyer-Peppas equation and the ‘n’ value lies in between 0.557-0.693 indicates Non-Fickian diffusion process. Conclusion: The results suggest that the developed KA intercalated microbeads are good potential drug carrier for the controlled release of D-PA.

scholarly journals Biodegradable microparticulate drug delivery system of diltiazem HCl

2012 ◽  
Vol 48 (4) ◽  
pp. 699-709 ◽  
Author(s):  
Manish Kumar Gupta ◽  
Deepak Prakash ◽  
Brahmeshwar Mishra
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Particle Size ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Diltiazem Hcl ◽  
Vitro Release ◽  
Scanning Electron

The efficacy of a drug in a specific application requires the maintenance of appropriate drug blood level concentration during a prolonged period of time. Controlled release delivery is available for many routes of administration and offers many advantages (as microparticles and nanoparticles) over immediate release delivery. These advantages include reduced dosing frequency, better therapeutic control, fewer side effects, and, consequently, these dosage forms are well accepted by patients. Advances in polymer material science, particle engineering design, manufacture, and nanotechnology have led the way to the introduction of several marketed controlled release products and several more are in pre-clinical and clinical development. The objective of this work is to prepare and evaluate diltiazem HCl loaded albumin microparticles using a factorial design. Albumin (natural polymer) microparticles were prepared by emulsion heat-stabilization method. Selected formulations were characterized for their entrapment efficiency, particle size, surface morphology, and release behavior. Analysis of variance for entrapment efficiency indicates that entrapment efficiency is best fitted to a response surface linear model. Surface morphology was studied by scanning electron microscopy. Scanning electron microscopy of the microparticles revealed a spherical, nonporous and uniform appearance, with a smooth surface. The geometric mean diameter of the microparticles was found to be 2-9 µm, which more than 75% were below 3.5 µm and drug incorporation efficiency of 59.74 to 72.48% (w/w). In vitro release profile for formulations containing diltiazem HCl loaded BSA microparticles with heat stabilization technique shows slow controlled the release of the drug up to 24 hours. The release pattern was biphasic, characterized by an initial burst effect followed by a slow release. All selected microparticles exhibited a prolonged release for almost 24 hours. On comparing regression-coefficient (r²) values for Hixson Crowel, Higuchi and Peppas kinetic models, different batches of microparticles showed Fickian, non-Fickian, and diffusion kinetics. The release mechanism was regulated by D:P ratio. From the statistical analysis it was observed that as the drug:polymer (D:P) ratio increased, there was a significant increase in the encapsulation efficiency. Based on the particle size, entrapment efficiency and physical appearance, DTM-3 formulations were selected for in vivo release study and stability study. The in vivo result of drug loaded microparticles showed preferential drug targeting to liver followed by lungs, kidneys and spleen. Stability studies showed that maximum drug content and closest in vitro release to initial data were found in the formulation stored at 4 ºC. In present study, diltiazem HCl loaded BSA microparticles were prepared and targeted to various organs to satisfactory level and were found to be stable at 4 ºC.

scholarly journals Synthesis and Evaluation of AlgNa-g-poly(QCL-co-HEMA) Hydrogels as Platform for Chondrocyte Proliferation and Controlled Release of Betamethasone

2021 ◽  
Vol 22 (11) ◽  
pp. 5730
Author(s):  
Jomarien García-Couce ◽  
Marioly Vernhes ◽  
Nancy Bada ◽  
Lissette Agüero ◽  
Oscar Valdés ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Controlled Release ◽  
Biomedical Applications ◽  
Release Kinetics ◽  
Cell Types ◽  
Tissue Engineering Scaffolds ◽  
Almost All ◽  
Scanning Electron

Hydrogels obtained from combining different polymers are an interesting strategy for developing controlled release system platforms and tissue engineering scaffolds. In this study, the applicability of sodium alginate-g-(QCL-co-HEMA) hydrogels for these biomedical applications was evaluated. Hydrogels were synthesized by free-radical polymerization using a different concentration of the components. The hydrogels were characterized by Fourier transform-infrared spectroscopy, scanning electron microscopy, and a swelling degree. Betamethasone release as well as the in vitro cytocompatibility with chondrocytes and fibroblast cells were also evaluated. Scanning electron microscopy confirmed the porous surface morphology of the hydrogels in all cases. The swelling percent was determined at a different pH and was observed to be pH-sensitive. The controlled release behavior of betamethasone from the matrices was investigated in PBS media (pH = 7.4) and the drug was released in a controlled manner for up to 8 h. Human chondrocytes and fibroblasts were cultured on the hydrogels. The MTS assay showed that almost all hydrogels are cytocompatibles and an increase of proliferation in both cell types after one week of incubation was observed by the Live/Dead® assay. These results demonstrate that these hydrogels are attractive materials for pharmaceutical and biomedical applications due to their characteristics, their release kinetics, and biocompatibility.

scholarly journals In vitro Release Kinetics Study of Ranolazine from Swellable Hydrophilic Matrix Tablets

1970 ◽  
Vol 8 (1) ◽  
pp. 31-38 ◽  
Author(s):  
Mohammad Nezab Uddin ◽  
Ishtiaq Ahmed ◽  
Monzurul Amin Roni ◽  
Muhammad Rashedul Islam ◽  
Mohammad Habibur Rahman ◽  
...  
Keyword(s):  
Drug Release ◽  
Sustained Release ◽  
Release Kinetics ◽  
In Vitro Release ◽  
High Viscosity ◽  
Matrix Tablets ◽  
Release Studies ◽  
The Matrix ◽  
Vitro Release

The objective of this study was to design oral sustained release matrix tablets of Ranolazine usinghydroxypropyl methylcellulose (HPMC) as the retardant polymer and to study the effect of formulation factors suchas polymer proportion and polymer viscosity on the release of drug. In vitro release studies were performed usingUSP type II apparatus (paddle method) in 900 mL of 0.1N HCl at 100 rpm for 12 hours. The release kinetics wasanalyzed using the zero-order, first order, Higuchi and Korsmeyer-Peppas equations to explore and explain themechanism of drug release from the matrix tablets. In vitro release studies revealed that the release rate decreasedwith increase in polymer proportion and viscosity grade. Mathematical analysis of the release kinetics indicated thatthe nature of drug release from the matrix tablets was dependent on drug diffusion and polymer relaxation andtherefore followed non-Fickian or anomalous release. The developed controlled release matrix tablets of Ranolazineprepared with high viscosity HPMC extended release up to 12 hours.Key words: Ranolazine; Sustained release; Methocel E50 Premium LV; Methocel K100LV CR; Methocel K4M CR;Methocel K15M CR.DOI: 10.3329/dujps.v8i1.5333Dhaka Univ. J. Pharm. Sci. 8(1): 31-38, 2009 (June)

scholarly journals DESIGN AND DEVELOPMENT OF RILPIVIRINE NANOPARTICLE CONTAINING CHITOSAN USING IONIC GELATION METHOD FOR HIV INFECTIONS

2020 ◽  
pp. 113-118
Author(s):  
MONTUKUMAR PATEL ◽  
NIRAV V. PATEL ◽  
TEJAS B. PATEL
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
In Vitro Release ◽  
Amorphous State ◽  
Hiv Infections ◽  
Spherical Particles ◽  
Ionic Gelation ◽  
Scanning Calorimetry ◽  
Scanning Electron

Objective: The primary objective of the current research was to prepare rilpivirine loaded Nanoparticles containing Chitosan using the ionic gelation method for HIV infections. Methods: The nanoparticles of rilpivirine were prepared using the ionic gelation technique. Further, nanoparticles were characterized by Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), scanning electron microscopy (SEM) and in vitro drug release. Results: The optimized nanoparticles were found with a particle size of 130.30±5.29 nm (mean±SD) and entrapment efficiency (% EE) of 77.10±0.50%. Scanning electron microscopy technique exposed spherical particles with uniform size. It was observed that the nanoparticles created showed the absence of the crystalline nature of the drug and its switch to the amorphous state. Results showed that more than 45% of the pure drug is released in 50 min and after 90 min almost about 95% of the drug is released. Conclusion: The research study concluded that the in vitro release profile of nanoparticles was found to be sustained up to 24 hr. Sustained release of the rilpivirine could improve patient obedience to drug regimens, growing action effectiveness. 

Preparation of letrozole dispersed pHEMA/AAm-g-LDPE drug release system: In-vitro release kinetics for the treatment of endometriosis

2019 ◽  
Vol 179 ◽  
pp. 445-452 ◽  
Author(s):  
Akhtar Jahan Siddiqa ◽  
Nilesh Kumar Shrivastava ◽  
M.E. Ali Mohsin ◽  
Mustufa Haider Abidi ◽  
Tauqeer Ahmed Shaikh ◽  
...  
Keyword(s):  
Drug Release ◽  
Release Kinetics ◽  
In Vitro Release ◽  
Release System ◽  
Drug Release System ◽  
Vitro Release

Development and Characterization of Triple Action-Dental Mold

2020 ◽  
Vol 2 (1) ◽  
pp. 60-69
Author(s):  
Soma Sengupta ◽  
Shounak Sarkhel ◽  
Biswajit Mukherjee
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Drug Release ◽  
Dental Pain ◽  
Drug Action ◽  
Lidocaine Hydrochloride ◽  
Surface Ph ◽  
Amoxicillin Trihydrate ◽  
Scanning Electron

Aim: The aim of the present study was the preparation and in vitro evaluation of polymeric molds with amoxicillin trihydrate, lidocaine hydrochloride, and metronidazole for sustained drug release for prolonged local action on an affected tooth (during carries and gum problems). Background : Periodontal diseases with infection and inflammation cause dental pain. For the treatment of dental problems such as dental pain, analgesics with antibiotics are prescribed at the initial stage. Objective: The main objective of the present study was to develop polymer-based dental mold containing three drugs (amoxicillin trihydrate, lidocaine hydrochloride, and metronidazole) to provide local drug action on the affected tooth or gingiva for a prolonged period of time. Methods: Dental molds were prepared with drugs and the optimum combination of polymers (determined by initial screening) such as corn zein, carbopol 934 P, gum acacia powder and poloxamer 407 by mixing together in ethanol (95%) followed by solvent evaporation. The developed dental molds were evaluated using different in vitro physio-chemical methods such as tooth adhesion test, percent swelling, surface pH, scanning electron microscopy, drug content and drug-release study by simultaneous UV spectroscopy. Results: The mean adhesive strength obtained in our formulation was 46.5 g-wt with a surface pH value of 6.5. The percentage of swelling of the dental molds varied from 43% to 73% in 4 h. Scanning electron microscopy (SEM) showed very small and uniformly distributed drug particles in the matrix. Drug loading was high and reproducible. The cumulative percentage release of lidocaine hydrochloride, amoxicillin trihydrate and metronidazole in vitro was about 93.81%, 59.67%, and 48.7%, respectively, over 24 h. Conclusion: The developed dental mold containing three drugs may be applied to the affected tooth for prolonged drug action locally and an easy option to relieve from dental pain and infection by local drug action.

Development of Mucoadhesive Patches for Buccal Administration of Prochlorperazine: Evaluation of In Vitro Release and Mechanical Properties

1970 ◽  
Vol 1 (1) ◽  
pp. 64-70
Author(s):  
Chandra Sekhar Kolli ◽  
Ramesh Gannu ◽  
Vamshi Vishnu Yamsani ◽  
Kishan V ◽  
Madhsudan Rao Yamsani
Keyword(s):  
Mechanical Properties ◽  
Drug Release ◽  
Moisture Absorption ◽  
Release Kinetics ◽  
In Vitro Release ◽  
Work Of Adhesion ◽  
Casting Technique ◽  
Vitro Release

The aim of this investigation was to develop and evaluate mucoadhesive buccal patches of prochlorperazine (PCPZ). Permeation of PCPZ was calculated in vitro using porcine buccal membrane. Buccal formulations were developed by solvent-casting technique using hydroxy propylmethyl cellulose (HPMC) as mucoadhesive polymer. The patches were evaluated for in vitro release, moisture absorption and mechanical properties. The optimized formulation, based on in vitro release and moisture absorption studies, was subjected for bioadhesion studies using porcine buccal membrane. In vitro flux of PCPZ was calculated to be 2.14 ± 0.01 µg. h–1.cm–2 and buccal absorption was also demonstrated in vivo in human volunteers.             In vitro drug release and moisture absorbed was governed by HPMC content. Increasing concentration of HPMC delayed the drug release. All formulations followed Zero order release kinetics whereas the release pattern was non-Fickian. The mechanical properties, tensile strength (10.28 ± 2.27 kg mm–2 for formulation P3) and elongation at break reveal that the formulations were found to be strong but not brittle. The peak detachment force and work of adhesion for formulation P3 were 0.68 ± 0.15 N and 0.14 ± 0.08 mJ, respectively. The results indicate that suitable bioadhesive buccal patches of PCPZ with desired permeability and suitable mechanical properties could be prepared

Kinetic Evaluation of Anti-tumor Chlorambucil Release from O-stearoyl Mannose PLGA Nanoparticles

2020 ◽  
Vol 10 (1) ◽  
pp. 63-75
Author(s):  
Antonio O. Costa ◽  
Claure N. Lunardi ◽  
Anderson J. Gomes
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Light Scattering ◽  
In Vitro Release ◽  
Plga Nanoparticles ◽  
Diffusion Models ◽  
Kinetic Evaluation ◽  
First Order ◽  
Scanning Electron

Purpose: This study assesses the kinetics of the anti-tumor drug chlorambucil (CLB) incorporated into PLGA nanoparticles (NP-CLB) with and without the presence of the O-stearoyl mannose (OEM) functionalizing agent (NP-CLBMAN). Methods: OEM was synthesized and used in the NP-CLB-MAN formulation. The nanoparticles were characterized by dynamic light scattering, electrophoretic light scattering, scanning electron microscopy, and Fourier-transform infrared spectroscopy. Results: The nanoparticles presented an encapsulation efficiency greater than 61% and a PdI between 0.186–0.217. The mean size was 185 nm for NP-CLB and 220 nm for NPCLB- MAN, and the zeta potential values were -17.7 mV for NP-CLB and -14.2 mV for NP- CLB-MAN. Scanning electron microscopy showed that NPs with OEM have a surface with a different shape, and FTIR analyses showed binding of CLB to the drug delivery system, as well as functionalization with OEM. In vitro release studies showed a biphasic release profile for both systems, and they were analyzed considering the mathematical Korsmeyer-Peppas, first-order, and Fick diffusion models, and the combination of the first-order and Fick diffusion models. Conclusion: The experimental results obtained for the release of CLB were better described using a combination of the first order and Fick diffusion mathematical models.

Development and Evaluation of Floating Tablets of Lamivudine

2021 ◽  
pp. 2593-2597
Author(s):  
Chinmaya Keshari Sahoo ◽  
Amiyakanta Mishra ◽  
Amaresh Prusty ◽  
S. Ram Mohan Rao ◽  
Jimidi Bhaskar
Keyword(s):  
Drug Release ◽  
Release Kinetics ◽  
In Vitro Release ◽  
Stability Study ◽  
Compression Method ◽  
Short Term ◽  
In Vitro Drug Release ◽  
Floating Tablets ◽  
Vitro Release

The present study was undertaken to develop floating tablets of lamivudine. The tablets were prepared by direct compression method. The prepared tablets were evaluated for pre compression parameters, post compression parameters, in vitro drug release study and in vitro buoyancy study. Among the prepared formulations F4 batch show 90.98% drug release in 12 h. The in vitro release kinetics were analyzed for different batches by different pharmacokinetic models such as zero order, first order, Higuchi, and Korsmeyer Peppas. The result of optimized formulation releases drug up to 12 h in a controlled manner and follows Higuchi kinetics. Short term stability study at 40±2ºC/75±5% RH for three months on the best formulation was performed showing no significant changes in thickness, hardness, friability, drug content and in vitro drug release.

DEVELOPMENT OF FLOATING GASTRORETENTIVE DRUG DELIVERY SYSTEM BASED ON A NOVEL EXCIPIENT FOR METFORMIN HYDROCHLORIDE USING MIXTURE DESIGN

2020 ◽  
pp. 62-71
Author(s):  
R. PAWAR ◽  
S. JAGDALE ◽  
D. RANDIVE
Keyword(s):  
Drug Release ◽  
Release Kinetics ◽  
Hydroxypropyl Methylcellulose ◽  
In Vitro Release ◽  
Mixture Design ◽  
Release Profile ◽  
Metformin Hydrochloride ◽  
Matrix Tablet ◽  
Vitro Release

Objective: The present study aimed to develop a new SR metformin hydrochloride (MH) gastroretentive formulation with novel excipient (NE), which has better floatation and can be prepared with more simple pharmaceutical techniques for the treatment of diabetes Mellitus. Methods: A gastro-retentive floating matrix tablet (GFT) formulation of MH was prepared using various concentrations of PEO (Polyox WSR-303) and hydroxypropyl methylcellulose K100M (HPMC K100 M) and Floating agent (novel excipient) to achieve desirable TFT, FLT and drug release. The wet granulation method was selected using isopropyl alcohol as a binder for the preparation of tablets. D-optimal non-simplex mixture design was used for the selection of suitable polymer concentrations and floating agents. Release kinetics was used to determine the mechanism of drug release. Results: It was observed that GFT with optimum quantities of PEO, HPMC K100M, and the floating agent showed 100 % of drug release in 24h with FT up to 24h and minimum FLT of less than 2 min. Formulation with an in vitro release profile slower to the marketed sample was prepared. Conclusion: A sustained-release (GFT) of MH tablets using PEO-, HPMC K100M, and an effervescent system was successfully prepared. AGFT formulation with an in vitro release profile slower to the marketed sample that releases MH for 24h may suitable for once-daily dosing can be prepared.

Sign in / Sign up

Export Citation Format

Share Document