scholarly journals Design and characterization of metoprolol floating matrix tablet

2017 ◽  
Vol 4 (2) ◽  
pp. 118
Author(s):  
Vasudha Bakshi ◽  
Swapna S. ◽  
Deepa Kumari Choudhary ◽  
Ch. Revanth ◽  
B. Sai KumarCh. Praveen ◽  
...  
Keyword(s):  
Drug Release ◽  
Release Kinetics ◽  
In Vitro Release ◽  
Release Profile ◽  
In Vitro Dissolution ◽  
Matrix Tablet ◽  
Formulation Development ◽  
Drug Release Profile ◽  
Gastric Residence Time

Objective: The objective of the present research was to develop a matrix embedded floating tablet of Metoprolol for the sustained activity and prolongation of gastric residence time to improve the bioavailability of the drug. Metoprolol was chosen as a model drug because it is better absorbed in the stomach than the lower gastro intestinal tract.Methods: The experimental work was divided into pre-formulation studies, formulation development, and evaluation. Standardization of drug and excipients confirmed the authentication of the samples. Floating test were conducted for all formulations, In vitro dissolution studies were carried out in a dissolution testing apparatus-II, FTIR study was performed to interpret the drug ,excipient interaction.Results: Floating tests were also performed for 15 formulations and among them five formulations have passed the floating tests (F1, F3, F5, F7, and F14). The In-vitro release kinetics study of this tablet indicated sustained release for Metoprolol and followed zero order release and 95% drug in 8 h in vitro. The drug release profile of formulated product was compared with marketed product Metolar. The floating tablets extended the drug release up to 8 hours. The drug-polymer interaction was evaluated by fourier transform infrared spectroscopy (FTIR).Conclusions: F3 formulation showed the best floating results. The comparative study between F3 and Metolar (Marketed Product) showed the similar in vitro drug release profile. Thus, the optimzed formulation F-3 can be successfully used for the management of hypertension.

DEVELOPMENT OF FLOATING GASTRORETENTIVE DRUG DELIVERY SYSTEM BASED ON A NOVEL EXCIPIENT FOR METFORMIN HYDROCHLORIDE USING MIXTURE DESIGN

2020 ◽  
pp. 62-71
Author(s):  
R. PAWAR ◽  
S. JAGDALE ◽  
D. RANDIVE
Keyword(s):  
Drug Release ◽  
Release Kinetics ◽  
Hydroxypropyl Methylcellulose ◽  
In Vitro Release ◽  
Mixture Design ◽  
Release Profile ◽  
Metformin Hydrochloride ◽  
Matrix Tablet ◽  
Vitro Release

Objective: The present study aimed to develop a new SR metformin hydrochloride (MH) gastroretentive formulation with novel excipient (NE), which has better floatation and can be prepared with more simple pharmaceutical techniques for the treatment of diabetes Mellitus. Methods: A gastro-retentive floating matrix tablet (GFT) formulation of MH was prepared using various concentrations of PEO (Polyox WSR-303) and hydroxypropyl methylcellulose K100M (HPMC K100 M) and Floating agent (novel excipient) to achieve desirable TFT, FLT and drug release. The wet granulation method was selected using isopropyl alcohol as a binder for the preparation of tablets. D-optimal non-simplex mixture design was used for the selection of suitable polymer concentrations and floating agents. Release kinetics was used to determine the mechanism of drug release. Results: It was observed that GFT with optimum quantities of PEO, HPMC K100M, and the floating agent showed 100 % of drug release in 24h with FT up to 24h and minimum FLT of less than 2 min. Formulation with an in vitro release profile slower to the marketed sample was prepared. Conclusion: A sustained-release (GFT) of MH tablets using PEO-, HPMC K100M, and an effervescent system was successfully prepared. AGFT formulation with an in vitro release profile slower to the marketed sample that releases MH for 24h may suitable for once-daily dosing can be prepared.

Formulation and Evaluation of Transdermal patch of Methimazole

2021 ◽  
pp. 4667-4672
Author(s):  
Nani Tadhi ◽  
Himansu Chopra ◽  
Gyanendra Kumar Sharma
Keyword(s):  
Drug Release ◽  
Release Kinetics ◽  
In Vitro Release ◽  
Transdermal Patch ◽  
Formulation Development ◽  
In Vitro Drug Release ◽  
Drug Release Study ◽  
Percent Moisture ◽  
Release Study

Transdermal patch is a drug delivery device in which the drugs are incorporated and is design in such a way that it releases the drug in sustained and at predetermined rate to deliver the drug through the skin to the systemic circulation painlessly. The aim of this research study was to formulate a controlled and sustained release transdermal matrix type patch of Methimazole. The matrix patch was prepared by solvent casting method using a various polymer in different concentration, HPMC (hydrophilic), Eudragit RL100 and Ethyl cellulose (hydrophobic) polymer. Total 9 prototype formulation were prepared and it was subjected for various evaluation test; weight uniformity, Folding endurance, thickness, Drug content, percent moisture content, percent Moisture uptake and In-vitro drug release study using Franz diffusion cell. The in-vitro CDR% data was fit into kinetics model to see the release kinetics from the patches. The Formulation F5 was choosen as a best formulation according to in-vitro drug release study. The in-vitro release was found 81.12 % in 12 hours, it followed zero order kinetics. The nature of polymer and concentration ratio of polymers plays a crucial role for obtaining a good transdermal patch design; therefore optimisation is very important step to formulate a desired TDDS. Therefore the result of the study encourages a further study and is hopeful that the present study would contribute to the recent pharmaceutical research for formulation development.

scholarly journals DESIGN AND IN VITRO/IN VIVO EVALUATION OF EXTENDED RELEASE MATRIX TABLETS OF NATEGLINIDE

2018 ◽  
Vol 7 (6) ◽  
Author(s):  
Mohini Sihare ◽  
Rajendra Chouksey
Keyword(s):  
Drug Release ◽  
Release Kinetics ◽  
In Vitro Release ◽  
Release Profile ◽  
Matrix Tablets ◽  
In Vivo Studies ◽  
Release Mechanism ◽  
In Vivo Evaluation

Aim: Nateglinide is a quick acting anti-diabetic medication whose potent activity lasts for a short duration. One of the dangerous side effects of nateglinide administration is rapid hypoglycemia, a condition that needs to be monitored carefully to prevent unnecessary fatalities. The aim of the study was to develop a longer lasting and slower releasing formulation of nateglinide that could be administered just once daily. Methods: Matrix tablets of nateglinide were prepared in combination with the polymers hydroxypropylmethylcellulose (HPMC), eudragits, ethyl cellulose and polyethylene oxide and the formulated drug release patterns were evaluated using in vitro and in vivo studies. Conclusion: Of the seventeen formulated matrix tablets tested, only one formulation labelled HA-2 that contained 15% HPMC K4M demonstrated release profile we had aimed for. Further, swelling studies and scanning electron microscopic analysis confirmed the drug release mechanism of HA-2. The optimized formulation HA-2 was found to be stable at accelerated storage conditions for 3 months with respect to drug content and physical appearance. Mathematical analysis of the release kinetics of HA-2 indicated a coupling of diffusion and erosion mechanisms. In-vitro release studies and pharmacokinetic in vivo studies of HA-2 in rabbits confirmed the sustained drug release profile we had aimed for. Keywords: Hydroxypropylmethylcellulose, Matrix tablets, Nateglinide, Sustained release

scholarly journals Application of Mathematical Models in Drug Release Kinetics of Cyanocobalamine Fast Dissolving Sublingual Film

2021 ◽  
pp. 72-81
Author(s):  
Adil Patel ◽  
Ami Kalsariya ◽  
Srushti Patel ◽  
Chandni Patel ◽  
Shreya Patel
Keyword(s):  
Drug Release ◽  
Mathematical Models ◽  
Release Kinetics ◽  
Release Profile ◽  
Suitable Model ◽  
Order Model ◽  
Drug Release Profile ◽  
Casting Technique ◽  
Kinetics Of

The aim of present work is to determine and analyse the kinetics of drug release from the fast dissolving sublingual by employing various mathematical models. A study was done with Cyanocobalamine fast dissolving sublingual films, 1.5 mg/film by employing solvent casting technique using dehydrated banana starch and Gelatin. The in-vitro drug release profile was carried out in pH 6.8 phosphate buffer (900 mL) using USP dissolution apparatus I (Basket) at 50 rpm for 20 mins. The drug release data was obtained, quantitatively correlated and interpreted with various mathematical models viz. Zero order model, first order model, Higuchi model, Hixson-Crowell model and Korsmeyer-Peppas model and evaluated to understand the kinetics of drug release. The criterion for the most suitable model was based on the high degree of coefficient of correlation of drug release profile of Cyanocobalamine fast dissolving sublingual films.

scholarly journals Formulation and Evaluation of Gabapentin Sustained Release Matrix Tablet Using Hibiscus rosa sinensis Leaves Mucilage as Release Retardant

2021 ◽  
pp. 564-572
Author(s):  
P. Amsa ◽  
G. K. Mathan ◽  
S. Magibalan ◽  
E. K. Velliyangiri ◽  
T. Kalaivani ◽  
...  
Keyword(s):  
Drug Release ◽  
Sustained Release ◽  
Release Kinetics ◽  
In Vitro Release ◽  
Magnesium Stearate ◽  
Matrix Tablets ◽  
Wet Granulation ◽  
Matrix Tablet ◽  
Hibiscus Rosa Sinensis

The major goal of this study was to develop and evaluate Sustained release matrix tablets of Gabapentin with Hibiscus rosa - sinensis leaves mucilage prepared by using wet granulation technique with microcrystalline cellulose as a diluents and magnesium stearate as a lubricant. Pre-compression and post-compression evaluation of physicochemical parameters were carried out and to be within acceptable limits. Drug and polymer compatibility were validated by FTIR measurements. Further, tablets were evaluated for in vitro release study. To get the sustained release of Gabapentin, the concentration of Hibiscus rosa- sinensis mucilage was tuned with a gas-generating agent. The % drug release of all formulation from F1 to F5 showed 91.24%, 80.24%, 70.53%, 62.12% and 49.83% respectively. All the dosage form release kinetics was computed using zero order, first order, Higuchi, and Korsmeyer–Peppas methods. From the above results, it is concluded that the n value of formulation F5 showed 0.78 suggesting anomalous (non-fickian) behavior of the drug. Mucilage from the leaves of Hibiscus rosa-sinensis has a great retarding effect in drug release from sustained release tablets.

scholarly journals Formulation development and evaluation of Luliconazole Topical Emulgel

2021 ◽  
pp. 79-87
Author(s):  
Naga sai divya K ◽  
T Malyadri ◽  
Ch.saibabu
Keyword(s):  
Drug Release ◽  
In Vitro Release ◽  
Formulation Development ◽  
Drug Release Profile ◽  
In Vitro Drug Release ◽  
Zero Order Kinetics ◽  
Diffusion Controlled ◽  
Carbopol 940 ◽  
Vitro Release

The purpose of the present study was to develop and optimize the emulgel system for Luliconazole using different types of gelling agents: HPMCK15M, Carbopol 940, and Xanthan Gum. The prepared emulgels were evaluated in terms of appearance, pH, spreadability, viscosity, drug content, and in-vitro drug release. In-vitro release study demonstrated diffusion-controlled release of Luliconazole from formulation up to 12 hours. The drug release profile exhibited zero-order kinetics. All the prepared emulgels showed acceptable physical properties concerning color, homogeneity, consistency, spreadability, and higher drug release. In the case of all evaluation parameters, carbopol based formulation showed better properties so, as a general conclusion, it was suggested that the Luliconazole emulgel formulation prepared with carbopol (F6) was the formula of choice.

scholarly journals Investigation of certain varieties of carbopol in ketorolac tromethamine hydrophilic matrix tablet formulations and evaluation of the kinetics of its in vitm release

2002 ◽  
Vol 70 (2) ◽  
pp. 189-198
Author(s):  
Genç Lütfi ◽  
Hegazy Nahed ◽  
Arica Betül
Keyword(s):  
Release Kinetics ◽  
In Vitro Release ◽  
Controlled Drug Release ◽  
Matrix Tablets ◽  
In Vitro Dissolution ◽  
Matrix Tablet ◽  
Compression Technique ◽  
Tablet Formulations ◽  
Kinetics Of

Matrix tablets of ketorolac trometharnine (KT) were prepared by direct compression technique and Carbopol 934, 940 and 1342 have been used as polymers in different concentrations (5-15 % ). For the quality control of tablets; physical tests as crushing strength, diameter-height ratio and fkiability, KT amount assay and in vitro dissolution techniques were performed and dissolution profiles were plotted and evaluated kinetically. The in vitro release kinetics of ten different formulations of KT matrix tablet were studied at pH 1.2 and pH 7.0 using the USP dissolution technique and apparatus with basket assembly. Dissolution results were evaluated kinetically and statistically. According to our results, different types and concentrations of carbopol to tablet formulations may effect in controlled drug release.

Development of Multiple-Unit Floating Drug Delivery System of Clarithromycin: Formulation, in vitro Dissolution by Modified Dissolution Apparatus, in vivo Radiographic Studies in Human Volunteers

Drug Research ◽  
2017 ◽  
Vol 67 (07) ◽  
pp. 412-418 ◽  
Author(s):  
Arun Reddy ◽  
Narendar Reddy
Keyword(s):  
Drug Release ◽  
Residence Time ◽  
Release Kinetics ◽  
In Vitro Dissolution ◽  
Physical Parameters ◽  
Gastric Residence Time ◽  
Human Volunteers ◽  
Multiple Unit

AbstractClarithromycin (CM), a broad spectrum macrolide antibiotic used to eradicate H. pylori in peptic ulcer. Clarithromycin (CM) is well absorbed from the gastrointestinal tract, but has a bioavailability of 50% due to rapid biodegradation. The aim of this investigation was to increase the gastric residence time, and to control the drug release of clarithromycin by formulating into multiple unit floating mini-tablets. Floating tablets were prepared by using direct compression method with HPMC K4M and Polyox WSR 1105 as release retarded polymers and sodium bicarbonate as gas generating agent. The prepared mini-tablets were evaluated for thickness, weight variation, friability, hardness, drug content, in vitro buoyancy, swelling studies, in vitro dissolution studies by using modified Rossett-Rice test and in vivo radiographic studies in healthy human volunteers in fasting conditions. DSC analysis revealed that no interaction between drug and excipients. All the physical parameters of the tablets were within the acceptable limits. The optimized formulation (F6) had showed controlled drug release of 99.16±3.22% in 12 h, by zero-order release kinetics, along with floating lag time of 9.5±1.28 s and total floating time of 12±0.14 h. X-ray imaging studies revealed that in vivo gastric residence time of clarithromycin floating mini-tablet in the stomach was about 3.5 h. The results demonstrated that the developed floating mini-tablets of clarithromycin caused significant enhancement in gastric retention time along with sustained effect and increased oral bioavailability.

scholarly journals Formulation Development and in vitro Evaluation of Drug Release Kinetics from Sustained Release Aceclofenac Matrix Tablets using Hydroxypropyl Methyl Cellulose

2012 ◽  
Vol 11 (1) ◽  
pp. 37-43 ◽  
Author(s):  
Abul Kalam Lutful Kabir ◽  
Shimul Halder ◽  
Madhabi Lata Shuma ◽  
Abu Shara Shamsur Rouf
Keyword(s):  
Drug Release ◽  
Sustained Release ◽  
Release Kinetics ◽  
Methyl Cellulose ◽  
In Vitro Dissolution ◽  
Matrix Tablet ◽  
Drug Content ◽  
Compressibility Index ◽  
Originator Brand

The objective of the present study was to develop a once-daily sustained release matrix tablet of Aceclofenac using hydroxypropyl methyl cellulose (Methocel K 100M CR) as release controlling factor and to  evaluate drug release parameters as per various release kinetic models. The tablets were prepared by direct  compression method. The powder blends were evaluated for angle of repose, loose bulk density, tapped bulk density,  compressibility index, total porosity and drug content etc. The tablets were subjected to thickness, weight variation test, drug content, hardness, friability and in vitro release studies. The in vitro dissolution study was carried out for 24  hours using United States Pharmacopoeia (USP) 22 paddle-type dissolution apparatus in phosphate buffer (pH 7.4). The powder blends showed satisfactory flow properties, compressibility index and drug content etc. All the tablet formulations showed acceptable pharmacotechnical properties and complied with pharmacopoeial specifications. The results of dissolution studies indicated that the formulation F-3 (40% Methocel K100M CR of total weight of tablet) could extend the drug release up to 24 hours and the total release pattern was very close to the theoretical release profile. By comparing the dissolution profiles with the originator brand of Arrestin SR, the formulation F-3 exhibited drug release profile like originator brand. From this study, a decrease in release kinetics of the drug was observed by  increasing the polymer concentration. Kinetic modeling of in vitro dissolution profiles revealed the drug release mechanism ranges from diffusion controlled or Fickian transport to anomalous type or non-Fickian transport, which  was only dependent on the type and amount of polymer used. The drug release followed both diffusion and erosion  mechanism in all cases. The drug release from the formulation (F-3) was satisfactory after 3 months storage in 400C  and 75% RH. Besides, this study explored both of the optimum concentration and effect of polymer(s) on  Aceclofenac release pattern from the tablet matrix for 24 hour period. The matrix tablet of Aceclofenac using HPMC  with molecular weight of K100M controlled the drug release effectively for 24 hours; hence the formulation can be  considered as a once daily sustained release tablet of Aceclofenac in order to improve patient compliance. DOI: http://dx.doi.org/10.3329/dujps.v11i1.12485 Dhaka Univ. J. Pharm. Sci. 11(1): 37-43, 2012 (June)

Development of colon targeted matrix tablets of Metformin HCl using various concentration of selected polymers

2017 ◽  
Vol 1 (1) ◽  
pp. 01-02
Author(s):  
Swathi Goli
Keyword(s):  
Drug Release ◽  
Guar Gum ◽  
In Vitro Release ◽  
Release Profile ◽  
Matrix Tablets ◽  
Release Mechanism ◽  
Drug Release Profile ◽  
Physical Changes ◽  
Metformin Hcl

The aim of the present study was to develop colon targeted matrix tablets of Metformin HCl using various conc. of selected polymers such as HPMC, Ethyl Cellulose Guar gum and combination of the same. Tablets were prepared by direct compression method and both pre-compression and post- compression parameters for all batches shows in the acceptable ranges. Short term accelerated stability studies was performed according to ICH guidelines temperature of 400±20 and relative humidity of 75%±5% RH to study any physical changes and chemical decomposition of drug, no formulation shown any physical or chemical changes. The compatibility of drugs, polymers and excipients were determined by FT-IR Spectroscopy results showed that the drug was compatible with polymers and all excipients. Dissolution studies were performed for 12 hours study in 1.2 pH for first 2 hrs then in 7.4 pH for next 3hrs followed by 6.8pH phosphate buffer at the temperature of 37±0.50C at 100rpm. The dissolution data so obtained was fitted to various mathematical kinetic models and the drug release followed mixed order and Higuchi’s model. To study release mechanism of drug from matrices the data were fitted to Koresmeyer-Peppas model and the release. In –vitro release profile of Metformin HCl from various polymers showed that drug increasing the conc. of polymers resulted in reduction in the release rate of drug (MTF1 to MTF12). Formulation containing combination of E.C-G.G, HPMC-G.G and E.C-HPMC showed drug release profile for MTF-12 about 38.72% after 12 hrs, MTF-11 about 40.66% after 12 hrs, for MTF-10 about 45.45% after 12 hrs. This is an indicative of retardation of drug release when polymer combination was changed. Results showed that the tablets with higher binding concentration showed minimum drug release. Combination of polymers shows greater retarding of drug release.

Sign in / Sign up

Export Citation Format

Share Document