scholarly journals Third Eye for Blind

Author(s):  
Mr. Sachin Tyagi

People with visual impairments often depend on outside help that can be provided by the following agencies Humans, well-trained dogs, or special electronic devices are used as decision support systems. Principal The problem for blind people is how to navigate where they want to go. Those people need Help from other people with good eyesight. As described by the World Health Organization, 10% of people with visual impairment have There is no functional vision to help them move safely without assistance. This article is Designed to help blind people overcome visual defects through the use of other senses, such as sound and Touch. The system uses the Atmega328 microcontroller, which is a high performance 8-bit AVR RISC microcontroller. To detect the distance, the system uses HCSR04, an ultrasonic range Finder distance sensor module. The sensor module is designed to use sensors to measure distance The SONAR or RADAR principle uses ultrasound to determine the distance of an object. This The system also includes a buzzer that generates an alarm sound and a motor that generates vibration. Sign. The system uses audio and vibration signals to notify users of upcoming obstacles. What The distance between the glove and the obstacle, the frequency of the audio signals and vibration is reduced Increase. Therefore, the system helps to simplify the navigation process for those who need it. The system provides a Low-cost, reliable, portable, energy-efficient and powerful navigation solutions Response time is short.

Author(s):  
Ramiz Salama ◽  
Ahmad Ayoub

Nowadays, blind or impaired people are facing a lot of problems in their daily life since it is not easy for them to move, which is very dangerous. There are about 37 million visually impaired people across the globe according to the World Health Organization. People with these problems mostly depend on others, for example, a friend, or their trained dog while movıng outside. Thus, we were motivated to develop a smart stick to solve this problem. The smart stick, integrated with an ultrasonic sensor, buzzer and vibrator, can detect obstacles in the path of the blind people. The buzzer and vibration motor are activated when any obstacle is detected to alert the blind person. This work proposes a low-cost ultrasonic smart blind stick for blind people so that they can move from one place to another in an easy, safe and independent manner. The system was designed and programmed using C language. Keywords: Arduino Uno, Arduino IDE, ultrasonic sensor, buzzer, motor.


2021 ◽  
Vol 11 (8) ◽  
pp. 3495
Author(s):  
Shabir Hussain ◽  
Yang Yu ◽  
Muhammad Ayoub ◽  
Akmal Khan ◽  
Rukhshanda Rehman ◽  
...  

The spread of COVID-19 has been taken on pandemic magnitudes and has already spread over 200 countries in a few months. In this time of emergency of COVID-19, especially when there is still a need to follow the precautions and developed vaccines are not available to all the developing countries in the first phase of vaccine distribution, the virus is spreading rapidly through direct and indirect contacts. The World Health Organization (WHO) provides the standard recommendations on preventing the spread of COVID-19 and the importance of face masks for protection from the virus. The excessive use of manual disinfection systems has also become a source of infection. That is why this research aims to design and develop a low-cost, rapid, scalable, and effective virus spread control and screening system to minimize the chances and risk of spread of COVID-19. We proposed an IoT-based Smart Screening and Disinfection Walkthrough Gate (SSDWG) for all public places entrance. The SSDWG is designed to do rapid screening, including temperature measuring using a contact-free sensor and storing the record of the suspected individual for further control and monitoring. Our proposed IoT-based screening system also implemented real-time deep learning models for face mask detection and classification. This module classified individuals who wear the face mask properly, improperly, and without a face mask using VGG-16, MobileNetV2, Inception v3, ResNet-50, and CNN using a transfer learning approach. We achieved the highest accuracy of 99.81% while using VGG-16 and the second highest accuracy of 99.6% using MobileNetV2 in the mask detection and classification module. We also implemented classification to classify the types of face masks worn by the individuals, either N-95 or surgical masks. We also compared the results of our proposed system with state-of-the-art methods, and we highly suggested that our system could be used to prevent the spread of local transmission and reduce the chances of human carriers of COVID-19.


2016 ◽  
Vol 36 (3) ◽  
pp. 239-243
Author(s):  
Grisel Marrero ◽  
Lilian P. Delgado ◽  
Humberto Caroll ◽  
Neise Ortiz ◽  
Alexis Musacchio ◽  
...  

Abstract A rapid, specific and sensible polystyrene latex-based reagent has been developed to detect rheumatoid factor (RF) in human sera. Detection of RF is one of the criteria for rheumatoid arthritis (RA) diagnosis. RF includes immunoglobulins IgG, IgM or IgA targeting human-IgG Fc region, found in sera of 70–90% of patients with RA. Spherical, clean polystyrene particles of 480±80 nm with a Z-potential of -28 mV were synthesized. Purified gamma-globulin human blood fraction, used as IgG source, was adsorbed on particles in glycine-buffered saline with a fivefold excess of the immunoglobulins needed to saturate the calculated total surface area of the particles. The reagent was calibrated against the World Health Organization international serum reference preparation and tested with commercial positive and negative RF controls. Reactivity of the developed diagnostic reagent with human sera, either positive or negative for RF, was evaluated. The sera were tested both intact and following complement inactivation. When complement-inactivated sera were used, our reagent showed 100% coincidence of results with a commercial diagnostic kit of specificity of 80% and sensibility of 93%. The in-house reagent developed in the present work is easy to prepare and at relatively low cost, making it ideal for RF detection in low-income settings.


Author(s):  
Yukiko Takahashi

Governments in developed countries specify water quality standards to be applied in their own countries. Recently the allowance values of harmful metals are getting tighter for environmental water and industrial wastewater throughout the world. For example, World Health Organization (WHO) recommends the criterion value of 3 ppb for cadmium for protection of human health, furthermore, governments of some countries provide the wastewater standard for zinc for conservation of aquatic life. High-performance analytical instruments such as AAS, ICP, and ICP-MS have been employed as official analytical methods of ultra-trace elements. Besides the costly initial and running expenses and the material and energy consuming of the instruments, specific technical skills and long analytical time are required for sample pre-treatment. Therefore, simple yet highly sensitive and eco-friendly on-site methods have been demanded for quick judgment of industrial and environmental water in developed countries as well as evaluation of drinking water in developing countries.


2019 ◽  
Vol 12 (4) ◽  
pp. 253-263
Author(s):  
Don Jethro Mavungu Landu ◽  
Michel Frédérich ◽  
Joseph Manzambi Kuwekita ◽  
Christian Bongo-Pasi Nswe ◽  
J K Mbinze ◽  
...  

Abstract Background In the context of old pharmaceutical legislation and regulations not adapted to current realities, the aim of the present study was to evaluate the existing pharmaceutical system in peri-urban areas of Kinshasa. Methods A prospective study was carried out during the period 2016–2018. The most used antimalarial medicines were identified through household and pharmaceutical establishment surveys. The samples of the obtained medicines were assayed with generic separation methods using the high-performance liquid chromatography technique coupled to a diode array detector. The registration status was checked for 126 antimalarial brand names. A characterization was carried out in 196 pharmaceutical establishments on the basis of standards set out by the Ministry of Health. Results Of the 75 samples assayed, 19% (14/75) were non-compliant. Of the 124 brand names, 46.0% (57/124) were unlicensed and 14.5% (18/124) had an expired licence. Of the 196 pharmaceutical establishments, only 2 (1.0%) had an authorization to practice, none met all the Ministry of Health minimum standards and 24.5% (48/196) met the World Health Organization Guidelines for the Storage of Essential Medicines and Other Health Commodities. Conclusions More resources should be mobilized to apply regulator sanctions.


2018 ◽  
Vol 49 (3) ◽  
pp. 201-212
Author(s):  
Ana Carolina Amaya Arias ◽  
Óscar Zuluaga ◽  
Douglas Idárraga ◽  
Javier Hernando Eslava Schmalbach

Introduction: Most maternal deaths that occur in developing countries are considered unfair and can be avoided. In 2008, The World Health Organization (WHO) proposed a checklist for childbirth care, in order to assess whether a simple, low-cost intervention had an impact on maternal and neonatal mortality in low-income countries. Objective: To translate, adapt and validate the content of the WHO Safe Childbirth Checklist (SCC) for its use in Colombia Methods: The checklist was translated and adapted to the Colombian context. It was subsequently validated by a panel of experts composed of 17 health workers with experience in maternal and neonatal care and safety. Reliability among judges was estimated (Rwg) and items were modified or added to each section of the list according to the results. Results: Modifications were made to 28 items, while 19 new items were added, and none was removed. The most important modifications were made to the management guidelines included in each item, and the items added refer to risks inherent to our environment. Conclusion: The Colombian version of the SCC will be a useful tool to improve maternal and neonatal care and thereby contribute to reducing maternal and neonatal morbidity and mortality in our country.


2018 ◽  
Vol 64 (11) ◽  
pp. 876-886 ◽  
Author(s):  
Daniela Maizel ◽  
Pilar Balverdi ◽  
Barry Rosen ◽  
Adriana M. Sales ◽  
Marcela A. Ferrero

Arsenic-hypertolerant bacteria were isolated from arsenic-contaminated well water from the village of Los Pereyra in Tucumán province, Argentina. Microorganisms that biotransform arsenic are a major factor in arsenic mobilization in contaminated aquifers. Groundwater analyses showed a level of arsenic contamination (mean concentration of 978 μg·L−1) that exceeds the safe drinking water limit of 10 μg·L−1recommended by the World Health Organization and the Argentine Food Code. There was considerable spatial variability in the concentration of arsenic in each of the wells analyzed and in the distribution of the major anions HCO3–, SO42–, and Cl–. Eighteen bacterial strains were characterized. Six strains belonging to the Actinobacteria phylum were able to grow in media with 20 mmol·L–1As(III) or 200 mmol·L–1As(V) and were also highly resistant to Cr, Cd, and Cu. Their ability to biotransform arsenic was examined by speciation of the products by high-performance liquid chromatography inductively coupled plasma mass spectrometry. In addition, two strains, Brevibacterium sp. strain AE038-4 and Microbacterium sp. strain AE038-20, were capable of aerobic arsenate reduction, which suggests that these strains could increase the mobility of arsenic by formation of more mobile As(III).


2014 ◽  
Vol 5 (1) ◽  
pp. 28-38 ◽  
Author(s):  
L. Guerrero-Latorre ◽  
M. Rusiñol ◽  
A. Hundesa ◽  
M. Garcia-Valles ◽  
S. Martinez ◽  
...  

Household-based water treatment (HWT) is increasingly being promoted to improve water quality and, therefore, health status in low-income countries. Ceramic water filters (CWFs) are used in many regions as sustainable HWT and have been proven to meet World Health Organization (WHO) microbiological performance targets for bacterial removal (2–4 log); however, the described viral removal efficiencies are insufficient to significantly reduce the associated risk of viral infection. With the objective of improving the viral removal efficiencies of ceramic water filters, new prototypes with different oxide compositions and firing atmospheres have been developed and evaluated. For removal efficiencies human adenoviruses, MS2 bacteriophage and Escherichia coli were quantified in all prototypes. A new model of CWF that was fired in a reductive atmosphere presented virus and bacteria removal efficiencies greater than 3.0 log and 2.5 log, respectively, which would fulfill the viral targets that are recommended by the WHO. Ceramic characterization of the selected filters, which were fired in a reductive atmosphere, showed that a larger specific surface area than those of control filters and higher fraction of a positive Z-potential fraction are the most likely explanations for this increase in virus removal.


2020 ◽  
Vol 12 (11) ◽  
pp. 206
Author(s):  
José Paulo Lousado ◽  
Sandra Antunes

The pandemic declared by the World Health Organization due to the SARS-CoV-2 virus (COVID-19) awakened us to a reality that most of us were previously unaware of—isolation, confinement and the massive use of information and communication technologies, as well as increased knowledge of the difficulties and limitations of their use. This article focuses on the rapid implementation of low-cost technologies, which allow us to answer a fundamental question: how can near real-time monitoring and follow-up of the elderly and their health conditions, as well as their homes, especially for those living in isolated and remote areas, be provided within their care and protect them from risky events? The system proposed here as a proof of concept uses low-cost devices for communication and data processing, supported by Long-Range (LoRa) technology and connection to The Things Network, incorporating various sensors, both personal and in the residence, allowing family members, neighbors and authorized entities, including security forces, to have access to the health condition of system users and the habitability of their homes, as well as their urgent needs, thus evidencing that it is possible, using low-cost systems, to implement sensor networks for monitoring the elderly using the LoRa gateway and other support infrastructures.


2017 ◽  
Vol 2 ◽  
pp. 78 ◽  
Author(s):  
Kebede Deribe ◽  
Jorge Cano ◽  
Emanuele Giorgi ◽  
David M. Pigott ◽  
Nick Golding ◽  
...  

Background: In 2011, the World Health Organization recognized podoconiosis as one of the neglected tropical diseases. Nonetheless, the number of people with podoconiosis and the geographical distribution of the disease is poorly understood. Based on a nationwide mapping survey and geostatistical modelling, we predict the prevalence of podoconiosis and estimate the number of cases across Ethiopia. Methods: We used nationwide data collected in Ethiopia between 2008 and 2013. Data were available for 141,238 individuals from 1,442 villages in 775 districts from all nine regional states and two city administrations. We developed a geostatistical model of podoconiosis prevalence among adults (individuals aged 15 years or above), by combining environmental factors. The number of people with podoconiosis was then estimated using a gridded map of adult population density for 2015. Results: Podoconiosis is endemic in 345 districts in Ethiopia: 144 in Oromia, 128 in Southern Nations, Nationalities and People’s [SNNP], 64 in Amhara, 4 in Benishangul Gumuz, 4 in Tigray and 1 in Somali Regional State. Nationally, our estimates suggest that 1,537,963 adults (95% confidence intervals, 290,923-4,577,031 adults) were living with podoconiosis in 2015. Three regions (SNNP, Oromia and Amhara) contributed 99% of the cases. The highest proportion of individuals with podoconiosis resided in the SNNP (39%), while 32% and 29% of people with podoconiosis resided in Oromia and Amhara Regional States, respectively. Tigray and Benishangul Gumuz Regional States bore lower burdens, and in the remaining regions, podoconiosis was almost non-existent.  Discussion: The estimates of podoconiosis cases presented here based upon the combination of currently available epidemiological data and a robust modelling approach clearly show that podoconiosis is highly endemic in Ethiopia. Given the presence of low cost prevention, and morbidity management and disability prevention services, it is our collective responsibility to scale-up interventions rapidly.


Sign in / Sign up

Export Citation Format

Share Document