scholarly journals Effect of organic acid coated phosphatic fertilizer on soil P status, yield and quality of Brinjal

2020 ◽  
Vol 8 (3) ◽  
pp. 47-52
Author(s):  
Anju Mohan ◽  
P Malarvizhi ◽  
RK Kaleeswari ◽  
T Saraswathi
Keyword(s):  
Organic Acid ◽  
Soil P ◽  
Yield And Quality ◽  
Phosphatic Fertilizer

scholarly journals Phosphorus (P) improves industrial tomato quality and yield in soil with high phosphorus content

2020 ◽  
pp. 1335-1341
Author(s):  
Arthur Bernardes Cecílio Filho ◽  
Bruno Trevizaneli ◽  
Sergio Manuel Rugeles Reyes
Keyword(s):  
Soluble Solids ◽  
Tomato Crop ◽  
Nutrient Contents ◽  
Soil P ◽  
Yield And Quality ◽  
P Content ◽  
Tomato Processing ◽  
Commercial Yield ◽  
Solids Content

Soils under intensive and successive cropping with central pivot irrigation tend to present high nutrient contents, especially phosphorus (P), which is a nutrient with a great impact on the yield and quality of agricultural products. Among the rotating crops, the application of high P rates is common in processing tomato, although not supported by research. This work evaluates the effect of phosphate fertilization (0, 200, 400, 600, 800, and 1000 kg ha-1 P2O5) on the yield and quality of industrial tomato ‘Heinz 9553’ grown in a soil with high available P content (145 mg dm-3) resulting of an intensive vegetables cultivation, which have high demand by P. The highest total (127.4 t ha-1) and commercial (108.6 t ha-1) yields were obtained with 413.9 and 384 kg ha-1 P2O5, respectively. The results showed that pH of tomato juice, the percentages of green, red, and commercial fruits were not influenced by the applied P rates. However, nutrient delivery increased the soluble solids content up to 356 kg ha-1 P2O5, which is interesting for tomato processing. After harvesting the fruits, the available soil P content was increased with P supply to the plants. For improvement of commercial yield and soluble solids characteristics, the tomato crop shall be fertilised with P even though the soil has high P content.

scholarly journals Effects of Different Seed Coating Ratios of an Organic Acid Mixture on Yield and Quality of Bread Wheat

2018 ◽  
Vol 6 (11) ◽  
pp. 1662
Author(s):  
Hatun Barut ◽  
Sait Aykanat ◽  
Ali Alpaslan Ezici ◽  
Uğur Sevilmiş
Keyword(s):  
Citric Acid ◽  
Grain Yield ◽  
Organic Acid ◽  
Bread Wheat ◽  
Acid Mixture ◽  
Seed Coating ◽  
Yield And Quality ◽  
Yield Values ◽  
1000 Grain Weight

This research was conducted during 2016-2017 awheat growing season to investigate the effects of different rates of seed coating of an organic acid mixture (citric acid, glutamate, and proline) on yield and quality of wheat. The field experiments were established in Dogankent and Haciali locations of Eastern Mediterranean Agricultural Research Institute in Turkey. Study was carried out with randomised complete block design with 4 replications and Ceyhan-99 bread wheat variety was used as seed material. Before seeding, wheat seeds were coated with organic acid mixture product (0.75% citric acid, 0.25% glutamate, 0.25% proline, 2% Zn and 96.75 water), in three different doses (500 ml ton-1, 1 l ton-1, 1.5 l ton-1) to compare with control (uncoated). There were statistically significant differences at 5% level in 1000 grain weight and grain yield values in Dogankent location and 1000 grain weight, grain yield and number of spikes in Hacialilocation. Highest yield values were obtained from 500 ml t-1 application dose for both locations. With 500 ml t-1 application dose at Dogankent location, grain yield was 11.9 t ha-1 which was 8.97% higher over control. In Hacali location, 500 ml t-1 application dose was increased yield by 15.96% compared to control which resulted with 10.5 t ha-1 grain yield. No statistically significant difference was observed in quality characteristics (protein, gluten, hardiness and sedimentation) in trials.

Evolution of yield and quality of sainfoin (Onobrychis viciifolia Scop.) in the spring growth cycle

Agronomie ◽  
2003 ◽  
Vol 23 (3) ◽  
pp. 193-201 ◽  
Author(s):  
Giorgio Borreani ◽  
Pier Giorgio Peiretti ◽  
Ernesto Tabacco
Keyword(s):  
Growth Cycle ◽  
Onobrychis Viciifolia ◽  
Yield And Quality

Орошение томата F1 Донской в открытом грунте Московской области

2019 ◽  
Author(s):  
D.I. Engalychev ◽  
N.A. Engalycheva ◽  
A.M. Menshikh
Keyword(s):  
Experimental Data ◽  
Agricultural Technology ◽  
Tomato Fruits ◽  
River Floodplain ◽  
Yield And Quality ◽  
Open Ground ◽  
Alluvial Meadow ◽  
Standard Production ◽  
Moscow River

Представлены экспериментальные данные о влиянии капельного орошения на урожайность и качество плодов томата при выращивании культуры в открытом грунте Московской области. На плодородных аллювиальных луговых почвах Москворецкой поймы при соблюдении агротехники без орошения в среднем за три года исследований в полевых условиях получена урожайность томата F1 Донской 31,9 т/га, с орошением 48,5 т/га, в т.ч. стандартной продукции 42,6 т/га.The article presents experimental data on the effect of drip irrigation on the yield and quality of tomato fruits when growing crops in open ground of the Moscow Region. On fertile alluvial meadow soils of the Moscow river floodplain, with the observance of agricultural technology without irrigation, the field yield of tomato hybrid F1 Donskoi on average for three years of research was 31.9 t/ha, with irrigation 48.5 t/ha, incl. standard production 42.6 t/ha.

Агрономическая эффективность промышленной (голландской) технологии возделывания картофеля

2018 ◽  
Author(s):  
C. Coy ◽  
A.V. Shuravilin ◽  
O.A. Zakharova
Keyword(s):  
Heavy Metals ◽  
Regression Analysis ◽  
Positive Response ◽  
Growth Yield ◽  
Correlation And Regression Analysis ◽  
Yield And Quality ◽  
Quality Of Products ◽  
High Degree ◽  
The Impact

Приведены результаты исследований по изучению влияния промышленной технологии возделывания картофеля на развитие, урожайность и качество продукции. Выявлена положительная реакция растений на подкормку K2SO4 в период посадки. Корреляционно-регрессионный анализ урожайности и качества клубней выявил высокую степень достоверности результатов опыта. Содержание нитратов и тяжелых металлов в клубнях было ниже допустимых величин.The results of studies on the impact of industrial technology of potato cultivation on growth, yield and quality of products. There was a positive response of plants to fertilizer K2SO4 in the period of planting. Correlation and regression analysis of yield and quality of tubers revealed a high degree of reliability of the results of experience. The contents of nitrates and heavy metals in tubers was below the permissible values.

Pengaruh Jenis Co-Solvent terhadap Rendemen dan Mutu Biodiesel secara Transesterifikasi In Situ Menggunakan Radiasi Gelombang Mikro

2016 ◽  
Vol 10 (2) ◽  
pp. 119-126
Author(s):  
Mahlinda Mahlinda ◽  
Fitriana Djafar
Keyword(s):  
Catalyst Concentration ◽  
Maximum Yield ◽  
Acid Value ◽  
Experimental Result ◽  
In Situ Transesterification ◽  
Yield And Quality ◽  
Solvent Type ◽  
Biodiesel Quality

The main purpose of this research was to observer effect co-solvent type (n-Hexane, chloroform and without co-solvent)  toward yield and quality of biodiesel via in situ transesterification process using microwave irradiation. The process was studied at microwave power 450 watt, reaction time 4 minutes, methanol to seed ratio 25:1 and catalyst concentration 5%. The physicochemical parameters of the biodiesel produced such as viscosity, density and acid value were analysed and compared with the SNI 7182-2012 standard. The experimental result showed the maximum yield biodiesel 78,32% obtained by using co-solvent chloroform.Test result of physicochemical properties (viscosity, density and acid value) of biodiesel products using co solvent n-Hexane, chloroform and without co solvent showed that these products conform to the SNI 7182-2012 standars. The type of co-solvent only affectedon biodiesel yield dan not affected on biodiesel quality (viscosity, density and acid value).  ABSTRAKTujuan penelitian ini adalah untuk mempelajari pengaruh jenis co-solvent (n-Hexane, chloroform dan tanpa co-solvent) terhadap rendemen dan mutu biodiesel secara trasesterifikasi in situ menggunakan radiasi gelombang mikro. Proses dilakukan pada daya gelombang mikro 450 watt, waktu reaksi 4 menit, perbandingan berat metanol terhadap bahan baku 25:1 dan jumlah katalis 5%. Parameter fisiko kimia dari produk biodiesel seperti viskositas, densitas dan angka asam di analisa dan dibandingkan dengan standar SNI 7182-2012 tentang biodiesel. Hasil penelitian menunjukkan rendemen maksimum biodiesel sebesar 78,32% diperoleh dengan menggunakan co-solvent chloroform. Hasil pengujian  karakteristik fisiko kimia (viskositas, densitas dan angka asam) dari produk biodiesel menggunakan co-solvent n-Hexane, chloroform dan tanpa co-solvent menunjukkan bahwa semua parameter ini masih memenuhi standar SNI 1782-2012 tentang biodiesel. Jenis co-solvent hanya berpengaruh pada rendemen biodiesel dan tidak berpengaruh terhadap mutu biodiesel (viskositas, densitas dan bilangan asam).Kata kunci: co-solvent, in situ transesterifikasi, microwave, rendemen, mutu   

Sign in / Sign up

Export Citation Format

Share Document