Shear coefficient of spin viscosity estimation through velocity profiles of a ferrofluid under the effect of an external rotating magnetic field of low amplitude and frequency

2021 ◽  
Vol 57 (2) ◽  
pp. 139-160
Keyword(s):  
Magnetic Field ◽  
Mathematical Model ◽  
Numerical Solution ◽  
Rotating Magnetic Field ◽  
Shear Coefficient ◽  
Definition Of ◽  
Low Amplitude ◽  
The Mathematical Model ◽  
Numerical Strategy

The present article describes a numerical strategy for the estimation of the shear coefficient of spin viscosity for a ferrofluid sample confined to a cylindrical container and exposed to the effect of an external rotating magnetic field with a low amplitude and frequency. As far as we know, there are no experimental measurements of such coefficient. Furthermore, the few analytical values reported differ in several orders of magnitude. First, we describe briefly the mathematical model of the system and its numerical solution. Then, the definition of the direct and inverse problems is given as a part of the methodology for estimating such coefficient. Finally, we solve the inverse problem using simulated measurements and two global optimization algorithms. We generate this type of measurements by adding white Gaussian noise signals to the numerical solution of the ferrohydrodynamic mathematical model. Several noise levels in the range of 10 to 40 dB were used to increase the number of scenarios for validation purpose. Results showed an excellent agreement between the estimated values and those used in the numerical solution of the mathematical model. A statistical analysis revealed a normal distribution that was dependent on the noise level. This variation did not affect the results, but showed instead the validity of the proposed method. Additionally, this strategy stands as a computational tool for validating experimental results of the future in situ measurements. Tables 7, Figs 11, Refs 17.

The Function of Magnetic Field in a Magnetic-Electrochemical Compound Polishing

2010 ◽  
Vol 97-101 ◽  
pp. 4141-4145 ◽  
Author(s):  
Li Min Shi ◽  
Er Liang Liu ◽  
Yong Jiang Niu ◽  
Yu Quan Chen
Keyword(s):  
Magnetic Field ◽  
Mathematical Model ◽  
Concentration Polarization ◽  
Electrochemical Reaction ◽  
Charged Particles ◽  
Polishing Process ◽  
Electrical Field ◽  
Movement Model ◽  
The Mathematical Model ◽  
The Magnetic Field

Traditionally, the magnetic field is always vertical to the electrical field in a magnetic-electrochemical compound polishing.The magnetic field is set to parallel the electrical field in this paper. The mathematical model of the charged particles movement in a magnetic field is established through the analysis of its movement process when using Coulomb laws and Lorentz force. Through constructing the velocity formulation and loci formulation, the function of the magnetic field is proved. Because of the magnetic field, the concentration polarization of electrochemical reaction can be reduced more and the electrochemical reaction can be accelerated easily than the traditional polishing in which the magnetic field is vertical to the electrical field. Finally, to verify the model, the magnetic-electrochemical compound polishing process has been tested and the results, compared with those obtained from the model, have shown the movement model is reasonable and the analysis to function of magnetic field is correct.

scholarly journals Mathematical Modeling of Pollution Transfer in Open Channel

2019 ◽  
pp. 49-50
Author(s):  
Petro Martyniuk ◽  
Oksana Ostapchuk ◽  
Vitalii Nalyvaiko
Keyword(s):  
Mathematical Modeling ◽  
Mathematical Model ◽  
Numerical Solution ◽  
Boundary Problem ◽  
Water Flow ◽  
Numerical Experiments ◽  
Open Channel ◽  
Computational Algorithm ◽  
The Mathematical Model

The problem of pollution transfer by water flow in open channel was considered. The mathematical model of the problem was constructed. The numerical solution of the onedimensional boundary problem was obtained. The computational algorithm for solving the problem was programmed to implement. A series of numerical experiments with their further analysis was conducted.

Mathematical model of the artificial muscle with two actuators

2020 ◽  
pp. 095440622094156
Author(s):  
Ljubinko B Kevac ◽  
Mirjana M Filipovic ◽  
Ana M Djuric
Keyword(s):  
Mathematical Model ◽  
Control Structure ◽  
Artificial Muscle ◽  
Parallel Robot ◽  
Simulation Results ◽  
Proportional Derivative Controller ◽  
Definition Of ◽  
The Mathematical Model ◽  
The Given ◽  
Very High

Characteristic construction of cable-suspended parallel robot of artificial muscle, which presents an artificial forearm, is analyzed and synthesized. Novel results were achieved and presented. Results presented in this paper were initially driven to recognize and mathematically define undefined geometric relations of the artificial forearm since it was found that they strongly affect the dynamic response of this system. It gets more complicated when one has more complex system, which uses more artificial muscle subsystems, since these subsystems couple and system becomes more unstable. Unmodeled or insufficiently modeled dynamics can strongly affect the system’s instability. Because of that, the construction of this system and its new mathematical model are defined and presented in this paper. Generally, it can be said that the analysis of geometry of selected mechanism is the first step and very important step to establish the structural stability of these systems. This system is driven with two actuators, which need to work in a coordinated fashion. The aim of this paper is to show the importance of the geometry of this solution, which then strongly affects the system’s kinematics and dynamics. To determine the complexity of this system, it was presumed that system has rigid cables. Idea is to show the importance of good defined geometry of the system, which gives good basis for the definition of mathematical model of the system. Novel program package AMCO, artificial muscle contribution, was defined for the validation of the mathematical model of the system and for choice of its parameters. Sensitivity of the system to certain parameters is very high and hence analysis of this system needs to be done with a lot of caution. Some parameters are very influential on the possible implementation of the given task of the system. Only after choosing the parameters and checking the system through certain simulation results, control structure can be defined. In this paper, proportional–derivative controller was chosen.

Studi Perpindahan Panas Material pada Sistem Koordinat Segitiga

2017 ◽  
Vol 1 ◽  
pp. 114
Author(s):  
Imam Basuki ◽  
C Cari ◽  
A Suparmi
Keyword(s):  
Heat Transfer ◽  
Mathematical Model ◽  
Heat Conduction ◽  
Partial Differential Equations ◽  
Finite Difference ◽  
Finite Difference Method ◽  
Numerical Solution ◽  
Difference Method ◽  
The Finite Difference Method ◽  
The Mathematical Model

<p class="Normal1"><strong><em>Abstract: </em></strong><em>Partial Differential Equations (PDP) Laplace equation can be applied to the heat conduction. Heat conduction is a process that if two materials or two-part temperature material is contacted with another it will pass heat transfer. Conduction of heat in a triangle shaped object has a mathematical model in Cartesian coordinates. However, to facilitate the calculation, the mathematical model of heat conduction is transformed into the coordinates of the triangle. PDP numerical solution of Laplace solved using the finite difference method. Simulations performed on a triangle with some angle values α and β</em></p><p class="Normal1"><strong><em> </em></strong></p><p class="Normal1"><strong><em>Keywords:</em></strong><em>  heat transfer, triangle coordinates system.</em></p><p class="Normal1"><em> </em></p><p class="Normal1"><strong>Abstrak</strong> Persamaan Diferensial Parsial (PDP) Laplace  dapat diaplikasikan pada persamaan konduksi panas. Konduksi panas adalah suatu proses yang jika dua materi atau dua bagian materi temperaturnya disentuhkan dengan yang lainnya maka akan terjadilah perpindahan panas. Konduksi panas pada benda berbentuk segitiga mempunyai model matematika dalam koordinat cartesius. Namun untuk memudahkan perhitungan, model matematika konduksi panas tersebut ditransformasikan ke dalam koordinat segitiga. Penyelesaian numerik dari PDP Laplace diselesaikan menggunakan metode beda hingga. Simulasi dilakukan pada segitiga dengan beberapa nilai sudut  dan  </p><p class="Normal1"><strong> </strong></p><p class="Normal1"><strong>Kata kunci :</strong> perpindahan panas, sistem koordinat segitiga.</p>

scholarly journals Modeling and Analysis of Magnetic Nanoparticles Injection in Water-Oil Two-Phase Flow in Porous Media under Magnetic Field Effect

Geofluids ◽  
2017 ◽  
Vol 2017 ◽  
pp. 1-12 ◽  
Author(s):  
Mohamed F. El-Amin ◽  
Ahmed M. Saad ◽  
Amgad Salama ◽  
Shuyu Sun
Keyword(s):  
Magnetic Field ◽  
Mathematical Model ◽  
Porous Media ◽  
Magnetic Nanoparticles ◽  
Additional Term ◽  
Flow In Porous Media ◽  
Phase System ◽  
Two Phase ◽  
The Mathematical Model ◽  
Nanoparticles Suspension

In this paper, the magnetic nanoparticles are injected into a water-oil, two-phase system under the influence of an external permanent magnetic field. We lay down the mathematical model and provide a set of numerical exercises of hypothetical cases to show how an external magnetic field can influence the transport of nanoparticles in the proposed two-phase system in porous media. We treat the water-nanoparticles suspension as a miscible mixture, whereas it is immiscible with the oil phase. The magnetization properties, the density, and the viscosity of the ferrofluids are obtained based on mixture theory relationships. In the mathematical model, the phase pressure contains additional term to account for the extra pressures due to fluid magnetization effect and the magnetostrictive effect. As a proof of concept, the proposed model is applied on a countercurrent imbibition flow system in which both the displacing and the displaced fluids move in opposite directions. Physical variables, including water-nanoparticles suspension saturation, nanoparticles concentration, and pore wall/throat concentrations of deposited nanoparticles, are investigated under the influence of the magnetic field. Two different locations of the magnet are studied numerically, and variations in permeability and porosity are considered.

MATHEMATICAL MODELING OF BLOOD FLOW IN A POROUS VESSEL HAVING DOUBLE STENOSES IN THE PRESENCE OF AN EXTERNAL MAGNETIC FIELD

2011 ◽  
Vol 04 (02) ◽  
pp. 207-225 ◽  
Author(s):  
J. C. MISRA ◽  
A. SINHA ◽  
G. C. SHIT
Keyword(s):  
Mathematical Modeling ◽  
Magnetic Field ◽  
Mathematical Model ◽  
Blood Flow ◽  
Shear Stress ◽  
External Magnetic Field ◽  
Volumetric Flow Rate ◽  
Hematocrit Level ◽  
Flow Through ◽  
The Mathematical Model

In this paper, a mathematical model has been developed for studying blood flow through a porous vessel with a pair of stenoses under the action of an externally applied magnetic field. Blood flowing through the artery is considered to be Newtonian. This model is consistent with the principles of ferro-hydrodynamics and magnetohydrodynamics. Expressions for the velocity profile, volumetric flow rate, wall shear stress and pressure gradient have been derived analytically under the purview of the model. The above said quantities are computed for a specific set of values of the different parameters involved in the model analysis. This serves as an illustration of the validity of the mathematical model developed here. The results estimated on the basis of the computation are presented graphically. The obtained results for different values of the parameters involved in the problem under consideration, show that the flow is appreciably influenced by the presence of magnetic field and the rise in the hematocrit level.

Sign in / Sign up

Export Citation Format

Share Document