scholarly journals Formulation and In Vitro Evaluation of Compressed Coated Tablets of Simvastatin for Pulsatile Drug Delivery

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Kumari P.V. Kamala ◽  
Mounica V. ◽  
Rao Y. Srinivasa
Keyword(s):  
Drug Delivery ◽  
Drug Release ◽  
Drug Delivery System ◽  
Delivery System ◽  
Guar Gum ◽  
Lag Time ◽  
Blood Cholesterol ◽  
In Vitro Dissolution ◽  
Pulsatile Drug Delivery

Pulsatile drug delivery system is one type of drug delivery system, where the delivery device is capable of releasing drugs after a predetermined time-delay (i.e. lag time). This system has a peculiar mechanism of delivering the drug rapidly and completely after a "lag time," i.e., a period of "no drug release." These systems are beneficial for drugs having high first-pass effect drugs administered for diseases that follow chrono pharmacological behavior such as drugs having specific absorption sites in GIT, targeting to colon; and cases where nighttime dosing is required. The objective of the present study was to formulate and evaluate a press coated pulsatile drug delivery system of simvastatin in order to attain a time controlled release to lower the blood cholesterol level by releasing the drug with a distinct predetermined lag time of five hrs. Simvastatin is a water insoluble drug and its absorption is dissolution rate limited. The core formulations were composed of simvastatin and disintegrants like lycoat, SSG, ludiflash in different ratios and was coated with xanthan gum, guar gum, HPMC K4M, HPMC K15M as a release modifier. Press coated tablets were evaluated for hardness, friability, drug content, and in vitro drug release. Result of in vitro dissolution study of the prepared tablet suggested that, the release of drug from press coated tablets match with chrono-biological requirement of disease.

scholarly journals FORMULATION AND EVALUATION OF PULSATILE DRUG DELIVERY SYSTEM OF SALBUTAMOL SULFATE FOR THE CHRONOTHERAPY OF ASTHMA

2018 ◽  
Vol 11 (9) ◽  
pp. 305
Author(s):  
Chiranjibi Adhikari ◽  
Gururaj S Kulkarni ◽  
Shivakumar Swamy
Keyword(s):  
Drug Delivery ◽  
Drug Release ◽  
Drug Delivery System ◽  
Delivery System ◽  
Lag Time ◽  
Release Profile ◽  
Salbutamol Sulfate ◽  
Pulsatile Drug Delivery ◽  
Core Tablet

Objective: The main objective of the present study was to design and evaluate a time-controlled single unit oral pulsatile drug delivery system containing salbutamol sulfate for the prevention of nocturnal asthma attacks.Methods: Drug containing core tablets (C1-C10) with different composition of superdisintegrants such as sodium starch glycolate, croscarmellose sodium, and crospovidone were prepared by direct compression technique. The fast disintegrating core tablet formulation was selected, and press-coated tablets (P1-P11) were prepared with different compositions of hydrophobic and hydrophilic polymers: Ethylcellulose-20 (EC-20), hydroxypropyl methylcellulose K4M, and low substituted hydroxypropyl cellulose (L-HPC LH11). The coating polymers were selected and quantified based on in vitro lag time and drug release profile in simulated gastric and intestinal fluids.Results: Formulation C10 with 7.5% crospovidone showed least disintegrating time, i.e., 0.31 min and was selected as the best immediate release core tablet. The press-coated tablet formulation P11 having 360 mg barrier layer of EC-20 and L-HPC LH11 in ratio 14:1 over the core tablet C10 showed rapid and complete drug release nearly after 6 h lag time. Accelerated stability studies of the optimized formulation P11 indicated no significant difference in release profile after a period of 6 months.Conclusion: The in vitro dissolution study showed that lag time before drug release was highly affected by the coating level and nature of coating polymer used. Time-controlled pulsatile release tablets can be prepared using press-coating techniques.

scholarly journals FORMULATION AND EVALUATION OF GASTRORETENTIVE FLOATING TABLETS OF LAFUTIDINE

2018 ◽  
Vol 8 (5) ◽  
pp. 393-399
Author(s):  
Ramdas T. Dolas ◽  
Shalindra Sharma ◽  
Madhuraj Sharma
Keyword(s):  
Drug Delivery ◽  
Drug Release ◽  
Drug Delivery System ◽  
Delivery System ◽  
Active Agent ◽  
Lag Time ◽  
In Vitro Dissolution ◽  
Wet Granulation ◽  
Floating Tablets

The purpose of this research was to develop a novel gastroretentive drug delivery system based on wet granulation technique for sustained delivery of active agent. Quick GI transit could result in incomplete drug release from the drug delivery system above the absorption zone leading to decreased efficacy of the administered dose and thus less patient compliance. Gastroretentive floating tablets, which was designed to provide the desired sustained and complete release of drug for prolonged period of time. Gastroretentive floating tablets of lafutidine were prepared by wet granulation technique using different concentrations of Gum Kondagagu, Gum olibanum and Locust bean Gum. The optimized formulation (LF14) exhibited 99.54% drug release in 12 hrs, while the buoyancy lag time was 33 sec. In-vitro drug release kinetics was found to follow both the Zero order and the possible mechanism of lafutidine release from the optimized formulation might be attributed to super case II transport mechanism. The Optimized formulation (LF14) showed no significant change in physical appearance, drug content, floating lag time, in vitro dissolution studies after 75%±5% RH at 40±20C relative humidity for 6 months. Keyword: Wet granulation, Floating lag Time, Gastroretentive, Lafutidine

Development and Evaluation of Floating Pulsatile Drug Delivery System Using Meloxicam

2017 ◽  
Vol 7 (04) ◽  
Author(s):  
ShirishaG. Suddala ◽  
S. K. Sahoo ◽  
M. R. Yamsani
Keyword(s):  
Rheumatoid Arthritis ◽  
Drug Delivery ◽  
Drug Release ◽  
Drug Delivery System ◽  
Delivery System ◽  
Lag Time ◽  
Oral Dosage ◽  
Lag Phase ◽  
Pulsatile Drug Delivery

Objective: The objective of this research work was to develop and evaluate the floating– pulsatile drug delivery system (FPDDS) of meloxicam intended for Chrono pharmacotherapy of rheumatoid arthritis. Methods: The system consisting of drug containing core, coated with hydrophilic erodible polymer, which is responsible for a lag phase for pulsatile release, top cover buoyant layer was prepared with HPMC K4M and sodium bicarbonate, provides buoyancy to increase retention of the oral dosage form in the stomach. Meloxicam is a COX-2 inhibitor used to treat joint diseases such as osteoarthritis and rheumatoid arthritis. For rheumatoid arthritis Chrono pharmacotherapy has been recommended to ensure that the highest blood levels of the drug coincide with peak pain and stiffness. Result and discussion: The prepared tablets were characterized and found to exhibit satisfactory physico-chemical characteristics. Hence, the main objective of present work is to formulate FPDDS of meloxicam in order to achieve drug release after pre-determined lag phase. Developed formulations were evaluated for in vitro drug release studies, water uptake and erosion studies, floating behaviour and in vivo radiology studies. Results showed that a certain lag time before drug release which was due to the erosion of the hydrophilic erodible polymer. The lag time clearly depends on the type and amount of hydrophilic polymer which was applied on the inner cores. Floating time and floating lag time was controlled by quantity and composition of buoyant layer. In vivo radiology studies point out the capability of the system of longer residence time of the tablets in the gastric region and releasing the drug after a programmed lag time. Conclusion: The optimized formulation of the developed system provided a lag phase while showing the gastroretension followed by pulsatile drug release that would be beneficial for chronotherapy of rheumatoid arthritis and osteoarthritis.

scholarly journals Applicability of Gum Karaya in the Preparation and in Vitro Evaluation of Losartan Potassium as Chronotherapeutic Drug Delivery System

2015 ◽  
Vol 7 (1-2) ◽  
pp. 65-74
Author(s):  
K. Latha ◽  
V. V. Srikanth ◽  
S. A. Sunil ◽  
N. R. Srinivasa ◽  
M. U. Uhumwangho ◽  
...  
Keyword(s):  
Drug Delivery ◽  
Tensile Strength ◽  
Drug Delivery System ◽  
Delivery System ◽  
Lag Time ◽  
Losartan Potassium ◽  
In Vitro Dissolution ◽  
Burst Release ◽  
Gum Karaya

The objective of this investigation is to study the applicability of gum karaya, the natural gum for the preparation and in vitro evaluation of losartan potassium, as Chronotherapeutic Drug Delivery System (ChDDS). The compression-coated timed-release tablets (CCT) containing losartan potassium in the core tablet were prepared by dry coating technique with different ratios of gum karaya as the outer coat. The parameters investigated were tensile strength, friability, in vitro dissolution studies and drug concentration. The optimized formulation was further characterized by powder XRD and FTIR to investigate interactions and no interactions observed. The tensile strength and friability of all the CCT were between 1.06-1.23 MN/m2 and < 0.3% respectively.  All the CCT showed a clear lag time before a burst release of drug. However, the lag time of drug release increased as the amount of gum karaya in the outer layer increased. For instance, the lag time of LGK1, LGK2, LGK3, LGK4, LGK5, LGK6 and LGK7 were 16, 10.5, 5.5, 3, 2, 1.5 and 0.5 hrs respectively.  The drug content of all the CCT was >98%. Formulation LGK3 was taken as an optimized formulation which can be exploited to achieve ChDDS of losartan potassium for the treatment of hypertension. 

scholarly journals Formulation and Development of Gastroretentive Drug Delivery System of Efavirenz

2019 ◽  
Vol 11 (05) ◽  
Author(s):  
Monica RP Rao ◽  
Pooja B. Karanjkar
Keyword(s):  
Drug Delivery ◽  
Drug Release ◽  
Drug Delivery System ◽  
Delivery System ◽  
Solid Dispersion ◽  
In Vitro Release ◽  
Lag Time ◽  
Intrinsic Dissolution ◽  
Drug Content

Efavirenz, a non-nucleotide reverse transcriptase inhibitor is an important drug for treating patients with Human Immunodeficiency Virus infections. It belongs to BCS class II have low solubility and poor intrinsic dissolution rate. It is highly basic (pKa 10.2) which makes it suitable candidate for floating dosage form for continuous delivery in stomach.The study was aimed to improve the solubility by solid dispersion technique.Saturation solubility study and drug content were evaluated for solid dispersion preparation. Saturation solubility shows 8 fold increases in 0.1 N HCL compared to plain drug and drug content was found to be between 95%-102%. Further effervescent floating gastroretentive drug delivery system was prepared by 32 full factorial design with independent variables i.e., concentration of HPMC K100 as matrix forming agent and citric acid as gas generating agent. Lag time, floating time, percent drug release were studied as responses. The optimized batch exhibited floating lag time of 40 sec and the in vitro release studies showed 89.5% drug release in 9 h and tablet remained floating for greater than 8 h. The study thus demonstrated that solubility is increased by solid dispersion technique and floating delivery systems may increase solubility and bioavailability of Efavirenz.

scholarly journals PREPARATION, CHARACTERIZATION AND STABILITY STUDIES OF SOLID SELF EMULSIFYING DRUG DELIVERY SYSTEM OF NIFEDIPINE

2020 ◽  
pp. 94-102
Author(s):  
SABITRI BINDHANI ◽  
SNEHAMAYEE MOHAPATRA ◽  
RAJAT KUMAR KAR
Keyword(s):  
Drug Delivery ◽  
Particle Size ◽  
Drug Release ◽  
Dissolution Rate ◽  
Drug Delivery System ◽  
Delivery System ◽  
Linseed Oil ◽  
Stability Study ◽  
In Vitro Dissolution

Objective: The objective of this work was to improve the solubility and dissolution rate of Nifedipine by preparing a solid-self micro emulsifying drug delivery system (Solid-smedds). Methods: Liquid-self-emulsifying drug delivery system formulations were prepared by using linseed oil as oil, tween 80 as a surfactant and PEG 400 as cosurfactant. Components were selected by solubility screening studies and the self-emulsifying region was identified by the pseudo-ternary phase diagram. Thermodynamic stability study was performed for the determination of stable liquid-smedds formulation. These formulations were evaluated for self-emulsification time, drug content analysis, robustness to dilution test, particle size analysis, in vitro diffusion study, and Stability study. Solid self-micro emulsifying formulations were prepared by using aerosil-200 at a different ratio. Lf9S (0.65:1) was selected due to its highest drug entrapment efficiency and a decrease in particle size. It was selected for further studies into DSC, SEM, FTIR, and XRD analysis. Results: DSC and XRD result shows that the drug within the formulation was in the amorphous state. From the SEM study, it was observed that the drug has been uniformly distributed and having a smooth surface. From the in vitro dissolution study, it improved the dissolution rate of nifedipine which was 98.70% of drug release where pure drug release only 6.72%. Conclusion: In conclusion, a solid self-micro emulsifying drug delivery system is improved the solubility and drug release rate but also improved the stability of the formulation.

scholarly journals Formulation and In vitro Characterization of Hydrochlorothiazide Gastroretentive Floating Drug Delivery System

2016 ◽  
Vol 14 (2) ◽  
pp. 163-170
Author(s):  
Md Asif Hasan ◽  
Sabiha Sultana ◽  
Sabiha Sultana ◽  
Md Masud Kaisar Bhuiyan ◽  
Md Selim Reza ◽  
...  
Keyword(s):  
Drug Delivery ◽  
Drug Release ◽  
Drug Delivery System ◽  
Delivery System ◽  
Lag Time ◽  
Content Uniformity ◽  
Floating Drug Delivery ◽  
Study Results ◽  
Floating Drug Delivery System

The purpose of the study was to develop and optimize floating bioadhesive gastroretentive drug delivery system (GRDDS) exhibiting a unique combination of floatation and bioadhesion to prolong residence in the stomach, using hydrochlorothiazide (HCTZ) as a model drug. Formulated matrix tablets were prepared by direct compression method with two different rate controlling polymer HPMC K4M and Carbopol 971. The formulated tablets were evaluated for physical characterization, floating lag time, swelling index and drug content uniformity. The drug release study was carried out in 0.1N HCl as the medium (pH 1.2) for 8 hours using USP type II dissolution apparatus and investigated the effects of polymers on the drug release profile. In vitro buoyancy study results found to be 10–33 sec and >8 h, floating lag time and total floating time respectively. Simulated drug release pattern in different kinetic models of Korsmeyer-Peppas release suggests that the mechanism controlling of the drug release from all formulations was the anomalous non-Fickian or anomalous release. Polymer with lower viscosity (HMPC K4M) was found to be beneficial than higher viscosity polymer (Carbopol 971) in improving the release properties of gastric floating drug delivery system. Incorporation of Carbopol in formulation also helped in maintaining buoyancy of system with desirable drug release. Further study is necessary in case of in vitro- in vivo relationship, but this study will ready to lend a hand to future scientists working in this field to successfully exploit the potential of this drug delivery system for the advantage of mankind.Dhaka Univ. J. Pharm. Sci. 14(2): 163-170, 2015 (December)

Formulation and Evaluation of Modified Pulsincap as Pulsatile Drug Delivery System for Treatment of Rheumatoid Arthritis

2016 ◽  
Vol 9 (5) ◽  
pp. 3476-3487
Author(s):  
Chavda D Hiral ◽  
Sonpal N Rakshit ◽  
Paresh Prajapati A ◽  
Madhabhai M Patel
Keyword(s):  
Rheumatoid Arthritis ◽  
Drug Delivery ◽  
Drug Release ◽  
Drug Delivery System ◽  
Delivery System ◽  
Phosphate Buffer ◽  
Lag Time ◽  
Contour Plot ◽  
Independent Variables ◽  
Pulsatile Drug Delivery

The aim of the present study was to design and evaluate a modified pulsincap pulsatile drug delivery system of etodolac for treatment of rheumatoid arthritis. Capsule body was made water insoluble by cross linking with formaldehyde vapour. It was filled with drug, osmogen NaCl and super disintegrant sodium starch glycolate to expel the drug after predetermined lag time. A hydro gel plug made of HPMC K4M was placed in the capsule body to achieve desired drug release after lag time for chronotherapy of rheumatoid arthritis. Untreated cap was then fitted to the treated body was sealed. Entire unit was coated with 5% Eudragit S-100 to prevent variable gastric emptying. A 32 full factorial design was used for optimization in which concentration ratio of NaCl and SSG (X1), and the weight of hydrogel plug (X2) were selected as independent variables while lag time and t90% were taken as dependent variables. FTIR and DSC studies confirmed drug excipient compatibility. Developed formulation was evaluated for in-vitro drug release in pH 1.2, phosphate buffer pH 6.8 and phosphate buffer pH 7.4. Statistical analysis confirmed the significance of selected independent variables. Response surface plot and contour plot indicate augmentation of the line toward the weight of hydrogel plug factor indicating greater significance. Formulation with highest desirability containing 34.4 mg of SSG, 137.6 mg of NaCl and 48 mg of HPMC K4M plug was selected as an optimized formulation as it provided the desired lag time of 6 hours and t90% of about 477 mins. Accelerated stability study performed on optimized formulation suggested stable and viable formulation. A stable, efficient formulation modified pulsincap of Etodolac as a pulsatile drug delivery system was developed with proposed increased patient compliance and improved dosage form efficiency.

scholarly journals Formulation and Evaluation of Bio-adhesive Pulsatile Drug Delivery System of Telmisartan

2020 ◽  
Vol 11 (2) ◽  
pp. 1282-1287
Author(s):  
Patil S. V. ◽  
Salokhe P. A. ◽  
Patil S. S. ◽  
Ustad J. Y. ◽  
Shedbale S. S.
Keyword(s):  
Drug Delivery ◽  
Drug Release ◽  
Drug Delivery System ◽  
Delivery System ◽  
Lag Time ◽  
Early Morning ◽  
Pulsatile Drug Delivery ◽  
Hypertensive Drug ◽  
Time Specific ◽  
Core Tablet

The main objective of this study was to formulate and evaluate of Bio-adhesive pulsatile drug delivery system of Telmisartan, an anti-hypertensive drug in order to achieve better therapeutic efficacy and patient compliance. The approach of combination of bio-adhesive pulsatile formulation is suitable for gastro retention and time specific drug delivery. The study was carried by preparation of fast disintegrating core tablet followed by incorporation of core tablet to design bio-adhesive pulsatile tablet by press coating. The press coated tablet was prepared with the polymersethyl cellulose and carbopol. The formulation was evaluated for precompression and post compression parameters, lag time, drug release and bio-adhesive study. All evaluation parameters were found within limits. The lag time expected for this disease was 8 hours as need of drug release for this disease was more likely to act in early morning. The 8 hour lag time was obtained in optimized formulation which has shown muco-adhesion for the same period. Thus bio-adhesive pulsatile drug delivery system could be the best precautionary alternative for the drugs having maximum absorption in stomach and used for diseases which follows circadian rhythm.

Sign in / Sign up

Export Citation Format

Share Document