scholarly journals Mandibular vertical asymmetry in adult orthodontic patients with different vertical growth patterns: A cone beam computed tomography study

2015 ◽  
Vol 86 (2) ◽  
pp. 271-277 ◽  
Author(s):  
Salih Celik ◽  
Mevlut Celikoglu ◽  
Suleyman K. Buyuk ◽  
A. Ercan Sekerci
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Asymmetry Index ◽  
Growth Patterns ◽  
Cone Beam ◽  
High Angle ◽  
Vertical Growth ◽  
Significant Difference ◽  
Orthodontic Patients ◽  
Normal Angle

ABSTRACT Objective:  To evaluate condylar and ramal vertical asymmetry in adult orthodontic patients with different vertical growth patterns and a clinically normal sagittal skeletal pattern using cone-beam computed tomography (CBCT). Materials and Methods:  The study sample consisted of 101 adult orthodontic patients (48 men and 53 women) divided into three groups according to their vertical growth patterns: high- (33 patients; mean age, 25.06 ± 6.05 years), low- (34 patients; mean age, 24.88 ± 5.22 years), and normal-angle (34 patients; mean age, 24.14 ± 4.26 years) groups. Condylar, ramal, condylar plus ramal height, and index measurements were performed using CBCT images and analyzed using one-way analysis of variance and post hoc Tukey tests. Results:  There was no statistically significant difference in height measurements between right and left sides in each group, except a slight difference of approximately 0.5 mm for condylar height (CH) in the low-angle group (P < .05). No statistically significant gender differences were found for the values (P > .05). In the high-angle group, the ramal height (RH) and condylar plus ramal height (CH + RH) on both sides were found to be less than those of the low- (P < .001) and normal-angle groups (P < .017 and P > .017, respectively), and the asymmetry index values were slightly higher than those of the low- and normal-angle groups (P > .05). Conclusions:  The high-angle group showed statistically significantly smaller values of RH and CH + RH on both sides and statistically insignificantly higher asymmetry index values than the low- and normal-angle groups.

scholarly journals Dehiscence and fenestration in patients with different vertical growth patterns assessed with cone-beam computed tomography

2012 ◽  
Vol 82 (5) ◽  
pp. 868-874 ◽  
Author(s):  
Sukru Enhos ◽  
Tancan Uysal ◽  
Ahmet Yagci ◽  
İlknur Veli ◽  
Faruk Izzet Ucar ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Growth Patterns ◽  
Cone Beam ◽  
Vertical Growth

scholarly journals Temporomandibular Joint Osseous Morphology of Class I and Class II Malocclusions in the Normal Skeletal Pattern: A Cone-Beam Computed Tomography Study

Diagnostics ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 541
Author(s):  
Xiao-Chuan Fan ◽  
Lin-Sha Ma ◽  
Li Chen ◽  
Diwakar Singh ◽  
Xiaohui Rausch-Fan ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Temporomandibular Joint ◽  
Cone Beam Computed Tomography ◽  
Class Ii ◽  
Class I ◽  
Cone Beam ◽  
Glenoid Fossa ◽  
Linear Measurements ◽  
Significant Difference ◽  
Skeletal Pattern

(1) Background—The aim of the present study was to evaluate the correlation between the temporomandibular joint (TMJ) osseous morphology of normal skeletal pattern individuals with different dental malocclusions by using cone-beam computed tomography (CBCT). (2) Methods—The CBCT images of bilateral TMJs in 67 subjects with skeletal class I and average mandibular angle (26 males and 41 females, age range 20–49 years) were evaluated in this study. The subjects were divided into class I, class II division 1, and class II division 2 according to the molar relationship and retroclination of the maxillary incisors. Angular and linear measurements of TMJ were evaluated and the differences between the groups were statistically analyzed. (3) Results—Intragroup comparisons showed statistical differences for articular eminence inclination, the width of the glenoid fossa, the ratio of the width of the glenoid fossa to the depth of the glenoid fossa, the condylar angle, and the intercondylar angle between the malocclusion groups. The measurements of the glenoid fossa shape showed no significant difference between the left and right sides. Females showed more differences in the morphological parameters of TMJ between the three malocclusion groups than the males. (4) Conclusion—The present study revealed differences in the TMJ osseous morphology between dental class I and class II malocclusions in the normal skeletal pattern.

scholarly journals Knowledge Level of Iranian Dental Practitioners Towards Digital Radiography And Cone-Beam Computed Tomography

2021 ◽  
Vol 24 (2) ◽  
Author(s):  
Fatemeh Salemi ◽  
Abbas Shokri ◽  
Maryam Foroozandeh ◽  
Maryam Farhadian ◽  
Ayoub Yeganeh
Keyword(s):  
Computed Tomography ◽  
Radiation Dose ◽  
Digital Radiography ◽  
Cone Beam Computed Tomography ◽  
Work Experience ◽  
Further Education ◽  
Cone Beam ◽  
Knowledge Level ◽  
Dental Practitioners ◽  
Significant Difference

Objective: This study aimed to assess the knowledge level of Iranian dental practitioners about digital radiography(DR) andcone-beamcomputedtomography (CBCT). Material and Methods: In this crosssectional study, a researcher-designed questionnaire was administered among 180 general dentists and specialists. The questionnaire had three main domains of demographic information, fifteen questions about knowledge of DR (advantages, disadvantages, physical properties) and twenty six questions about knowledge of CBCT (indications, applications, advantages, route of knowledge acquisition). Data were analyzed using descriptive statistics, t-test and Pearson’s correlation coefficient. Results: Of 180 participants, 76 (42.2%) were females. The minimum, maximum and mean± standard deviation scores obtained in DR were 4, 14, and 9.031 ± 1.85 and in CBCT were 0,26 and 18.56 ± 4.81, respectively. In the CBCT domain, the participants had maximum knowledge about “low radiation dose” (72.8%) and minimum knowledge about the “role of CBCT in determination of bone density” (45%). In DR domain, the participants had maximum knowledge about “no need for radiographic films” (75.6%) and minimum knowledge about “not requiring manual processing” (15.6%). Overall, participants had higher level of knowledge about CBCT than DR. An inverse correlation was noted between age and work experience with the number of correct answers. However, no significant difference was noted in the knowledge level of males and females regarding CBCT or DR (p = 0.233 and p = 0.227, respectively). Conclusions: further education seem imperative for dentists in this respect for more efficient diagnosis and treatment planning, minimize patient radiation dose and save time and cost.   Keywords Digital radiography; Cone-Beam computed tomography; Knowledge; Dentists.

scholarly journals Comparison of the Hounsfield Unit Values Obtained From Cone-Beam Computed Tomography (CBCT) and Multidetector Computed Tomography (MDCT) Images for Different Bone Densities

2021 ◽  
Vol 7 (2) ◽  
Author(s):  
Atefeh Khavid ◽  
Mojgan Sametzadeh ◽  
Mostafa Godiny ◽  
Mohammad Mehdi Moarrefpour
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Pearson Correlation ◽  
Hounsfield Unit ◽  
Cone Beam ◽  
Ct Scanner ◽  
Significance Level ◽  
Dental Practitioners ◽  
Significant Difference ◽  
The Mean

Background and objective: In recent years, cone-beam computed tomography (CBCT) has become a key diagnostic tool in dentistry. CBCT can provide 3D images of the maxillofacial area to help dental practitioners in diagnosis and treatment, especially implant placement and treatment of pathogenic lesions. This study aimed to compare the Hounsfield Unit (HU) values obtained from CBCT images for bones of different densities with the corresponding HU values from MDCT images. Materials and methods: cube-shaped bone blocks of identical size were cut from the middle section of the cow ribs and femur area such that they had a layer of cortical bone in their buccal, lingual, and top surfaces and trabecular bone in the middle. MDCT scans were performed using a Somatom Sensation Ct Scanner. After determining HU from the results of these scans, nine suitable specimens from different ranges of HU were chosen for comparison. HU of the CBCT images was computed by the dedicated software of the CBCT machine. Finally, HU values obtained from MDCT and CBCT were compared. Data analysis was performed using SPSS version 25 at the 0.05 significance level. Results: The results showed a statistically significant difference between the mean HU from MDCT images and the mean HU from CBCT images (P<0.05). For similar specimens, CBCT produced higher mean HU values than MDCT. The Pearson correlation test detected a significant direct relationship between the HU values of specimens in MDCT and CBCT (P<0.05). Conclusion: For the tools and software used in this study, there was no significant difference between the HU values obtained from MDCT and CBCT, but the mean HU obtained from CBCT was higher than that from MDCT.

scholarly journals Evaluation of the Prevalence of Concha Bullosa in Cone-Beam Computed Tomography Images

2020 ◽  
Vol 12 (3) ◽  
pp. 93-96
Author(s):  
Nasim Shams ◽  
Bahareh Shams ◽  
Zahra Sajadi
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Middle Turbinate ◽  
Cone Beam ◽  
P Value ◽  
Concha Bullosa ◽  
Computed Tomography Images ◽  
Significant Difference ◽  
And Gender ◽  
Sinus Ostium

Background: The ostiomeatal complex (OMC) is not a separate anatomical structure although it is a functional unit of structures, including the middle meatus, uncinate process, infundibulum, maxillary sinus ostium, ethmoidal bulla, anterior ethmoid sinus ostium, and frontal recess. Concha bullosa is the pneumatization of the concha, which is one of the most common anatomical variations in the middle turbinate. Methods: This study was conducted using the cone-beam computed tomography (CBCT) images of 172 patients in the archives of the Department of Oral and Maxillofacial Radiology, Dentistry School, Ahvaz Jundishapur. Patient information including age and gender, presence or absence of concha bullosa, the involved side (left or right), and its type (i.e., extensive, lamellar, and bulbous) were collected in the information form. Finally, the chi-square test (with SPSS, version 22) was used to analyze the data, and P value less than 0.05 was considered statistically significant. Results: Patients with and without concha bullosa were 39.1 and 41.7 years, respectively, but it was no significant difference in terms of age (P = 0.321). Out of 52 patients with concha bullosa, 19 (36.5%) cases were males and 33 (63.5%) of them were females. The prevalence of concha bullosa was higher for the bilateral side (20 patients, 38.5%, P = 0.000). The prevalence of bulbulsand lamellar-shape was nearly the same (32.7% and 30.8%, respectively). Eventually, the extensive shape with 36.5% was more frequent for the shape of concha bullosa (P = 0.000). Conclusions: The prevalence of concha bullosa was high. There was no significant difference in terms of age (P = 0.321) and gender (P = 0.058) of patients with concha bullosa. The extensive type and the bilateral appearance of concha bullosa were more significant (P = 0.000).

Mandibular ramus height and condyle distance asymmetries in individuals with different facial growth patterns: a cone-beam computed tomography study

2020 ◽  
Author(s):  
Christian Reis Lemes ◽  
Carolina Fernandes Tozzi ◽  
Saulo Gribel ◽  
Bruno Frazão Gribel ◽  
Giovana Cherubini Venezian ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Growth Patterns ◽  
Cone Beam ◽  
Facial Growth ◽  
Mandibular Ramus ◽  
Ramus Height

3D Evaluation of the Relationship between Different Vertical Growth Patterns and Cranial Base Angulations

2020 ◽  
Author(s):  
Mehmet Ugurlu ◽  
Rıdvan Oksayan ◽  
Ibrahim Sevki Bayrakdar ◽  
Fatih Kahraman ◽  
Ilhan Metin Dagsuyu ◽  
...  
Keyword(s):  
Statistical Tests ◽  
Three Dimensional ◽  
Cranial Base ◽  
Growth Patterns ◽  
High Angle ◽  
Facial Growth ◽  
Vertical Growth ◽  
Study Results ◽  
Kolmogorov Smirnov ◽  
Normal Angle

Abstract Objectives This study aimed to compare cranial base angulations in subjects with high-angle, low-angle, and normal-angle vertical growth patterns using cone beam computed tomography (CBCT). Design This study is a retrospective clinical research. Settings This study was carried out at the Dentistry Faculty of Eskisehir Osmangazi University. Participants According to skeletal vertical face growth patterns, 78 subjects (48 females and 30 males, average age: 13.19 ± 1.73 years) were divided equally into three groups: high angle, low angle, and normal angle groups. Main Outcome Measures Cephalometric images were derived from CBCT, and patients were classified according to the SN-GoGn angle (sella-nasion, gonion gnathion angle). Sagittal, axial, and coronal cranial base angulations were measured in three-dimensional (3D) CBCT images. Data were analyzed using the Kolmogorov–Smirnov normality, Kruskal–Wallis, and Mann-Whitney U statistical tests. Results There were statistically significant differences between the low-angle and high-angle groups according to sagittal cranial base angulation parameters (p = 0.01). Conversely, there were no statistically significant differences between vertical facial growth patterns according to coronal and axial cranial angle variables (p > 0.05). Conclusion According to the study results, there were no effects of cranial base angulations in two planes (coronal and axial) on different vertical skeletal growth patterns. In the sagittal cranial base angulation parameter, the high-angle group showed greater angulation values than the low-angle group. CBCT may be helpful for evaluating, diagnosing, and predicting 3D cranial base differences.

Sign in / Sign up

Export Citation Format

Share Document