scholarly journals A prospective clinical trial of the effects produced by the Connecticut intrusion arch on the maxillary dental arch

2020 ◽  
Vol 90 (4) ◽  
pp. 500-506
Author(s):  
Alessandro Schwertner ◽  
Renato Rodrigues de Almeida ◽  
Renata Rodrigues de Almeida-Pedrin ◽  
Thais Maria Freire Fernandes ◽  
Paula Oltramari ◽  
...  
Keyword(s):  
Correction Method ◽  
Maxillary Incisor ◽  
Dental Arch ◽  
Deep Bite ◽  
Lateral Cephalograms ◽  
Distal Surface ◽  
The Mean ◽  
Maxillary Incisors ◽  
Group 2 ◽  
Group 1

ABSTRACT Objective To assess and compare the effects produced in the maxillary dental arch by means of Connecticut intrusion arch (CIA) with or without a cinch back on the distal end of the tube of the first molars. Materials and Methods This study included 44 patients with a mean age of 13.1 ± 1.8 years treated for deep bite with a CIA randomly divided into two groups: group 1 (G1), 22 patients with initial mean age of 12.72 ± 1.74 years treated with the CIA in the upper arch without a cinch back on the distal surface of the tube of the first molars, and group 2 (G2), 22 patients with an initial mean age of 13.67 ± 2.03 years treated with the CIA with a cinch back. Lateral cephalograms were available before treatment (T1) and after intrusion of maxillary incisors (T2). The mean treatment period was 5.5 ± 1.45 months. Intragroup and intergroup changes in the maxillary incisor and molar positions were analyzed by paired and independent t-tests associated with the Holm-Bonferroni correction method for multiple comparisons (P < .05). Results There were significant differences between groups in terms of maxillary incisor displacement. The maxillary incisors flared labially (2.17°) and proclined (1.68 mm) in group 1, whereas a palatal inclination (−1.99°) and retroclination (−1.13 mm) was observed in group 2. No significant differences were found for the molar positions between the groups. Conclusions The presence or absence of a distal bend in CIA affects incisor tipping and proclination during intrusion mechanics.

scholarly journals Intrusive Arch versus Miniscrew-Supported Intrusion for Deep Bite Correction

2019 ◽  
Vol 7 (11) ◽  
pp. 1841-1846 ◽  
Author(s):  
Manal Mohamed El Namrawy ◽  
Fouad El Sharaby ◽  
Mohamed Bushnak
Keyword(s):  
Maxillary Incisor ◽  
X Rays ◽  
Deep Bite ◽  
Significant Difference ◽  
Skeletal Effects ◽  
The Mean ◽  
Maxillary Incisors ◽  
Group 2 ◽  
Age Range ◽  
Group 1

BACKGROUND: Intrusion of maxillary incisors is the treatment of choice to correct deep bite problem in gummy smile patients. AIM: The objective of this study was to compare the effectiveness and efficiency of miniscrew-supported intrusion versus intrusion arch for treatment of deep bite.METHODS: The study sample consisted of 30 post pubertal patients (21 females and 9 males) with an age range from 17 to 29. They were divided into 2 groups (15 subjects in each group). Group 1 underwent maxillary incisor intrusion using miniscrews, and in group 2 intrusive arch was used. Pre and post-treatment lateral cephalometric x-rays and study models were made to evaluate the demo-skeletal effects. During the study period, no other intervention was attempted. Paired t-test was used to study the changes after treatment.RESULTS: The mean amount of overbite correction was 2.6 ± 0.8 (0.49 mm per month) in the miniscrew-supported intrusion group and 2.9 ± 0.8 (0.60 mm per month) in the intrusive arch group. No statistically significant difference was found in the extent of maxillary incisor intrusion between the two systems. The two intrusion systems were statistically different in the extent of incisor proclination, as an intrusive arch group tended to proline upper incisors more than miniscrews-supported intrusion group.CONCLUSION: Both systems successfully intruded the 4 maxillary incisors almost with no loss to the sagittal and vertical anchorage, although intrusive arch tended to proline upper incisors significantly.

scholarly journals Effects of mandibular incisor intrusion obtained using a conventional utility arch vs bone anchorage

2011 ◽  
Vol 81 (5) ◽  
pp. 767-775 ◽  
Author(s):  
Esen Aydoğdu ◽  
Ömür Polat Özsoy
Keyword(s):  
T Test ◽  
Wilcoxon Test ◽  
Mandibular Incisor ◽  
Deep Bite ◽  
Mini Implants ◽  
The Mean ◽  
Group 2 ◽  
Group 1 ◽  
Mandibular Incisors ◽  
Center Of Resistance

Abstract Objective: To compare the dentofacial effects of mandibular incisor intrusion using mini-implants with those of a conventional incisor intrusion mechanic, the utility arch. Materials and Methods: Twenty-six deep-bite patients were enrolled to one of the two groups. In group 1 the mandibular incisors were intruded using a 0.16 × 0.22–inch stainless-steel segmental wire connected to two mini-implants. In group 2 the mandibular incisor intrusion was performed using a conventional utility arch. Conventional lateral cephalometric radiographs were taken at pretreatment and at the end of intrusion. Thirty landmarks were identified to measure 23 linear and 20 angular measurements. Intragroup comparisons were made using a paired t-test or a Wilcoxon test. Intergroup comparisons were made using a Student's t-test or a Mann-Whitney U-test. Results: The duration of intrusion was 5 months for group 1 and 4 months for group 2. In the implant group, the mean amount of change was 0.4 mm/mo for the incisor tip and 0.3 mm/mo for the center of resistance, and in the utility arch group, the mean amount of change was 0.25 mm/mo for the incisor tip and 0.2 mm/mo for the center of resistance. The mandibular incisors showed an average protrusion of 7° in the implant group and 8° in the utility arch group. Conclusions: Incisor intrusion that was achieved using an implant-supported segmented archwire was no different than the movement achieved with a conventional intrusion utility arch. The only difference between the two methods was in the molar movement.

scholarly journals A comparative study of the effect of the intrusion arch and straight wire mechanics on incisor root resorption: A randomized, controlled trial

2017 ◽  
Vol 88 (1) ◽  
pp. 20-26 ◽  
Author(s):  
Marcio Rodrigues de Almeida ◽  
Aline Siqueira Butzke Marçal ◽  
Thais Maria Freire Fernandes ◽  
Juliana Brito Vasconcelos ◽  
Renato Rodrigues de Almeida ◽  
...  
Keyword(s):  
Root Resorption ◽  
Controlled Trial ◽  
Three Dimensional ◽  
Deep Bite ◽  
Significance Level ◽  
External Apical Root Resorption ◽  
Maxillary Incisors ◽  
Group 2 ◽  
Leveling And Alignment ◽  
Group 1

ABSTRACT Objective: To analyze and compare external apical root resorption (EARR) of maxillary incisors treated by intrusion arch or continuous archwire mechanics. Materials and Methods: This cone-beam computed tomography (CBCT) study analyzed 28 deep bite patients in the permanent dentition who were randomly divided into two groups: Group 1, 12 patients with initial mean age of 15.1 ± 1.6 years and mean overbite of 4.6 ± 1.2 mm treated with the Connecticut intrusion arch (CIA) in the upper arch (Ortho Organizers, Carlsbad, Calif) for a mean period of 5.8 ± 1.27 months. Group 2, 16 patients with initial mean age of 22.1 ± 5.7 years and mean overbite of 4.1 ± 1.1 mm treated with conventional leveling and alignment using continuous archwire mechanics for 6.1 ± 0.81 months. The degree of EARR was detected in 112 maxillary incisors by using CBCT scans and a three-dimensional program (Dolphin 11.7, Dolphin Imaging & Management Solutions, Chatsworth, Calif). The CBCT scans were obtained before (T1) and 6 months after initiation of treatment (T2). Differences between and within groups were assessed by nonpaired and paired t-tests, respectively, with a 5% significance level. Results: Significant differences were found for both groups between T1 and T2 (P < .05) indicating that EARR occurred in both groups. However, there were no significant differences when EARR was compared between group 1 (−0.76 mm) and group 2 (−0.59 mm). Conclusions: The Connecticut intrusion arch did not lead to greater EARR of maxillary incisors when compared with conventional orthodontic mechanics.

scholarly journals Comparison of anterior and posterior mini-implant-assisted maxillary incisor intrusion: Root resorption and treatment efficiency

2016 ◽  
Vol 86 (5) ◽  
pp. 746-752 ◽  
Author(s):  
Isil Aras ◽  
Ali V. Tuncer
Keyword(s):  
Root Resorption ◽  
T Test ◽  
Maxillary Incisor ◽  
Implant Loosening ◽  
Treatment Efficiency ◽  
Deep Bite ◽  
Mini Implants ◽  
Beta Titanium ◽  
The Mean ◽  
Maxillary Incisors

ABSTRACT Objective:  To compare, through cone-beam computed tomography (CBCT), the root resorption and treatment efficiency of two different mini-implant-assisted modalities in intruding the maxillary incisors. Materials and Methods:  Thirty-two adults who had deep bite and elongated maxillary incisors were randomly allocated to two groups: anterior mini-implant group (AMG) and posterior mini-implant group (PMG). In the AMG, approximately 40 g of force was applied per side with elastic chains from mini-implants placed between the lateral incisors and canines and in the PMG, with beta-titanium wires from mini-implants placed between the second premolars and first molars. This study was conducted on CBCT scans taken before intrusion and after 4 months of intrusion. Data were analyzed by means of a paired t-test, independent t-test, and Pearson’s correlation test. Results:  One patient was excluded from the AMG due to mini-implant loosening. While the incisors showed a significant reduction in length and volume, this amount was greater in the AMG, especially in the central incisors (P < .05). Together with the mean intrusion rates of 0.62 and 0.39 mm/mo in the AMG and PMG respectively, the center of resistance of the incisors showed distal movement with labial tipping; these changes were greater in the PMG (P < .001). Volumetric root resorption was correlated with the amount of intrusion (P < .05). Conclusions:  Intrusion anchoring from posterior mini-implants is preferred in cases of upright incisors, as the use of such mechanics directs the roots into the spongiosa where they undergo less root resorption and more labial tipping.

Creation of physiologic rhythm by closed loop stimulation in heart failure patients with severe chronotropic incompetence: worldwide first results of a pilot study

2020 ◽  
Vol 41 (Supplement_2) ◽  
Author(s):  
J Proff ◽  
B Merkely ◽  
R Papp ◽  
C Lenz ◽  
P.J Nordbeck ◽  
...  
Keyword(s):  
Heart Rate ◽  
Closed Loop ◽  
Funding Source ◽  
Chronotropic Incompetence ◽  
First Results ◽  
The Mean ◽  
Group 2 ◽  
Group 1

Abstract Background The prevalence of chronotropic incompetence (CI) in heart failure (HF) population is high and negatively impacts prognosis. In HF patients with an implanted cardiac resynchronisation therapy (CRT) device and severe CI, the effect of rate adaptive pacing on patient outcomes is unclear. Closed loop stimulation (CLS) based on cardiac impedance measurement may be an optimal method of heart rate adaptation according to metabolic need in HF patients with severe CI. Purpose This is the first study evaluating the effect of CLS on the established prognostic parameters assessed by the cardio-pulmonary exercise (CPX) testing and on quality of life (QoL) of the patients. Methods A randomised, controlled, double-blind and crossover pilot study has been performed in CRT patients with severe CI defined as the inability to achieve 70% of the age-predicted maximum heart rate (APMHR). After baseline assessment, patients were randomised to either DDD-CLS pacing (group 1) or DDD pacing at 40 bpm (group 2) for a 1-month period, followed by crossover for another month. At baseline and at 1- and 2-month follow-ups, a CPX was performed and QoL was assessed using the EQ-5D-5L questionnaire. The main endpoints were the effect of CLS on ventilatory efficiency (VE) slope (evaluated by an independent CPX expert), the responder rate defined as an improvement (decrease) of the VE slope by at least 5%, percentage of maximal predicted heart rate reserve (HRR) achieved, and QoL. Results Of the 36 patients enrolled in the study, 20 fulfilled the criterion for severe CI and entered the study follow-up (mean age 68.9±7.4 years, 70% men, LVEF=41.8±9.3%, 40%/60% NYHA class II/III). Full baseline and follow-up datasets were obtained in 17 patients. The mean VE slope and HRR at baseline were 34.4±4.4 and 49.6±23.8%, respectively, in group 1 (n=7) and 34.5±12.2 and 54.2±16.1% in group 2 (n=10). After completing the 2-month CPX, the mean difference between DDD-CLS and DDD-40 modes was −2.4±8.3 (group 1) and −1.2±3.5 (group 2) for VE slope, and 17.1±15.5% (group 1) and 8.7±18.8% (group 2) for HRR. Altogether, VE slope improved by −1.8±2.95 (p=0.31) in DDD-CLS versus DDD-40, and HRR improved by 12.9±8.8% (p=0.01). The VE slope decreased by ≥5% in 47% of patients (“responders to CLS”). The mean difference in the QoL between DDD-CLS and DDD-40 was 0.16±0.25 in group 1 and −0.01±0.05 in group 2, resulting in an overall increase by 0.08±0.08 in the DDD-CLS mode (p=0.13). Conclusion First results of the evaluation of the effectiveness of CLS in CRT patients with severe CI revealed that CLS generated an overall positive effect on well-established surrogate parameters for prognosis. About one half of the patients showed CLS response in terms of improved VE slope. In addition, CLS improved quality of life. Further clinical research is needed to identify predictors that can increase the responder rate and to confirm improvement in clinical outcomes. Funding Acknowledgement Type of funding source: Private company. Main funding source(s): Biotronik SE & Co. KG

Comparison of the ATRIA, CHA2DS2-VASc, and Modified Scores ATRIA-HSV, CHA2DS2-VASc-HS, for the Prediction of Coronary Artery Disease Severity

Angiology ◽  
2021 ◽  
pp. 000331972199141
Author(s):  
Arafat Yildirim ◽  
Mehmet Kucukosmanoglu ◽  
Fethi Yavuz ◽  
Nermin Yildiz Koyunsever ◽  
Yusuf Cekici ◽  
...  
Keyword(s):  
Coronary Artery Disease ◽  
Coronary Artery ◽  
Vascular Disease ◽  
Operating Characteristics ◽  
Coronary Artery Disease Severity ◽  
Group 3 ◽  
The Mean ◽  
Group 2 ◽  
Artery Disease ◽  
Group 1

Many parameters included in the Anticoagulation and Risk Factors in Atrial Fibrillation (ATRIA) and CHA2DS2-VASc (congestive heart failure, hypertension, age ≥75 years, diabetes mellitus, stroke, vascular disease, age 65-74 years, sex category) scores also predict coronary artery disease (CAD). We modified the ATRIA score (ATRIA-HSV) by adding hyperlipidemia, smoking, and vascular disease and also male sex instead of female. We evaluated whether the CHA2DS2-VASc, CHA2DS2-VASc-HS, ATRIA, and ATRIA-HSV scores predict severe CAD. Consecutive patients with coronary angiography were prospectively included. A ≥50% stenosis in ≥1epicardial coronary artery (CA) was defined as severe CAD. Patient with normal CA (n = 210) were defined as group 1, with <50% CA stenosis (n = 178) as group 2, and with ≥50% stenosis (n = 297) as group 3. The mean ATRIA, ATRIA-HSV, CHA2DS2-VASc, and CHA2DS2VASc-HS scores increased from group 1 to group 3. A correlation was found between the Synergy between PCI with Taxus and Cardiac Surgery score and ATRIA ( r = 0.570), ATRIA-HSV ( r = 0.614), CHA2DS2-VASc ( r = 0.428), and CHA2DS2-VASc-HS ( r = 0.500) scores ( Ps < .005). Pairwise comparisons of receiver operating characteristics curves showed that ATRIA-HSV (>3 area under curve [AUC]: 0.874) and ATRIA (>3, AUC: 0.854) have a better performance than CHA2DS2-VASc (>1, AUC: 0.746) and CHA2DS2-VASc-HS (>2, AUC: 0.769). In conclusion, the ATRIA and ATRIA-HSV scores are simple and may be useful to predict severe CAD.

Does Presurgical Nasoalveolar Molding Have a Long-Term Effect on Nasal and Upper Airway Dimensions?

2020 ◽  
pp. 105566562098023
Author(s):  
Ashwina S. Banari ◽  
Sanjeev Datana ◽  
Shiv Shankar Agarwal ◽  
Sujit Kumar Bhandari
Keyword(s):  
Upper Airway ◽  
P Value ◽  
Airway Patency ◽  
The Mean ◽  
Group 2 ◽  
Acoustic Pharyngometry ◽  
Nasoalveolar Molding ◽  
Area And Volume ◽  
Group 1

Objectives: To compare nasal and upper airway dimensions in patients with cleft lip and palate (CLP) who underwent nasoalveolar molding (NAM) with those without NAM during infancy using acoustic pharyngometry and rhinometry. Materials and Methods: Eccovision acoustic pharyngometry and rhinometry (Sleep Group Solutions) was used for assessment of mean area and volume of nasal and upper airway in patients with complete unilateral CLP (age range 16-21 years) treated with NAM (group 1, n = 19) versus without NAM (group 2, n = 22). Results: The mean nasal cross-sectional areas and volume were higher in group 1 compared to group 2 on both cleft ( P value <.001) and noncleft side ( P value >.05). The mean area and volume of upper airway were also significantly higher in group 1 compared to group 2 ( P value <.05). Conclusions: Nasoalveolar molding being one of the first interventions in chronology of treatment of patients with CLP, its long-term outcome on nasal and upper airway patency needs to be ascertained. The results of the present study show that the patients with CLP who have undergone NAM during infancy have better improvement in nasal and upper airway patency compared with those who had not undergone NAM procedure. The basic advantages of being noninvasive, nonionizing and providing dynamic assessment of nasal and upper airway patency make acoustic pharyngometry and rhinometry a diagnostic tool of choice to be used in patients with CLP.

scholarly journals Comparison of Bite Force in Patients After Treatment of Mandibular Fractures With 3-Dimensional Locking Miniplate and Standard Miniplates

2019 ◽  
Vol 1 (1) ◽  
pp. 7-10
Author(s):  
Gaurav Singh ◽  
Madan Mishra ◽  
Amit Gaur ◽  
Dhritiman Pathak
Keyword(s):  
Treatment Strategies ◽  
Bite Force ◽  
Mandibular Fractures ◽  
Time Intervals ◽  
Experimental Conditions ◽  
3 Dimensional ◽  
The Mean ◽  
Group 2 ◽  
Drilling Conditions ◽  
Group 1

Background: Fractures of the mandible can be studied and described in anatomic terms, functional considerations, treatment strategies, and outcome measures. The performance of any fixation system depends on multiple factors including plate adaptation, screw placement, bone quality, drilling conditions, and postoperative patient compliance. Bite force assesses masticatory muscle function under clinical and experimental conditions. Method: 30 patients with isolated, noncomminuted mandibular fractures were randomly divided into two equal groups. Group 1 patients were treated using 3-dimensional locking miniplates and group 2 patients were treated with standard miniplates. The bite forces were recorded at definite time intervals: preoperatively, and second week, sixth week, third month, and sixth month postoperatively. Result: At 6 weeks postoperative, 3 month postoperative, and 6 month postoperative, the mean bite force was found to be significantly higher among group 1 patients as compared to those in group 2 in all the sites. While at 2 week postoperative, the mean bite force was found to be significantly higher in Group 2 as compared to Group 1 at incisor region. Conclusion: The overall results of the present study show better performance in bite force for the 3-dimensional locking miniplate when compared with standard miniplates.

scholarly journals Repair Integrity and Functional Outcomes Between Knot-Tying and Knotless Suture-Bridge Arthroscopic Rotator Cuff Repair: A Prospective Randomized Clinical Trial

2021 ◽  
Vol 9 (4) ◽  
pp. 232596712110024
Author(s):  
Koray Şahin ◽  
Fatih Şentürk ◽  
Mehmet Ersin ◽  
Ufuk Arzu ◽  
Mechmet Chodza ◽  
...  
Keyword(s):  
Rotator Cuff ◽  
Constant Score ◽  
Knot Tying ◽  
Suture Bridge ◽  
Significant Difference ◽  
The Mean ◽  
Group 2 ◽  
Cuff Repair ◽  
Group 1

Background: Knot-tying suture-bridge (SB) rotator cuff repair may compromise the vascularity of the repaired tendon, causing tendon strangulation and medial repair failure. The knotless SB repair technique has been proposed to overcome this possibility and decrease retear rates. Purpose: To compare clinical and structural outcomes and retear patterns between the knot-tying and knotless SB techniques. We hypothesized that the knotless technique would result in lower retear rates owing to the preservation of intratendinous vascularity. Study Design: Randomized controlled trial; Level of evidence, 1. Methods: A total of 104 patients with full-thickness rotator cuff tears were randomly and prospectively allocated to undergo knot-tying (group 1) or knotless (group 2) SB repair. Clinical outcome measures included range of motion, the visual analog scale (VAS) for pain, and the Constant score for function. Repair integrity was evaluated on magnetic resonance imaging scans using the Sugaya classification. Retears were also classified according to their pattern as type 1 (lateral) or type 2 (medial). Results: Overall, 88 patients (group 1: n = 42 [mean ± SD age, 54.3 ± 9.8 years]; group 2: n = 46 [mean ± SD age, 55.8 ± 8.2 years]) were included in the final analysis. The mean ± SD follow-up period was 25.4 ± 8.3 and 23.3 ± 7.2 months for groups 1 and 2, respectively. From preoperatively to postoperatively, the mean VAS pain score improved significantly in both groups (group 1: from 7.4 ± 1.7 to 1.0 ± 1.7; group 2: from 7.1 ± 1.9 to 1.3 ± 2.0; P < .0001 for both), as did the mean ± SD Constant score (group 1: from 51.7 ± 13.4 to 86.0 ± 11.5; group 2: from 49.4 ± 18.4 to 87.2 ± 14.8; P < .0001 for both). There was no significant difference between the groups for the postoperative VAS or Constant score. The retear rate was not significantly different between the groups (19.0% [8/42] in group 1 and 28.3% [13/46] in group 2; P > .05). There was a significant difference in the type 2 failure rate (75.0% [6/8] in group 1 and 23.1% [3/13] in group 2; P = .03). Conclusion: Both techniques showed excellent improvement and comparable clinical outcomes, and there was no significant difference in retear rates. Consistent with previously published data, the type 2 failure rate was significantly higher with the knot-tying technique. Registration: NCT03982108 ( ClinicalTrials.gov identifier).

TO ASSESS THE IDEAL TIME OF LAPAROSCOPIC CHOLECYSTECTOMY AFTER ENDOSCOPIC RETROGRADE CHOLANGIOPANCREATOGRAPHY IN CASES OF CHOLELITHIASIS WITH CHOLEDOCHOLITHIASIS

2021 ◽  
Vol 5 (4) ◽  
Author(s):  
Dhirendra Godara ◽  
Vineet Choudhary ◽  
Nitish Soni
Keyword(s):  
Laparoscopic Cholecystectomy ◽  
Endoscopic Retrograde Cholangiopancreatography ◽  
Medical Sciences ◽  
Early Recovery ◽  
Endoscopic Retrograde ◽  
The Mean ◽  
Group 2 ◽  
Late Group ◽  
Group 1 ◽  
The Ideal

Background: Aims of this study was assess the ideal time of laparoscopic cholecystectomy after endoscopic retrograde cholangiopancreatography in cases of cholelithiasis with Choledocholthiasis Methods: The present study was carried out on 150 patients admitted in Department of General surgery National Institute of Medical Sciences and Research, Jaipur, diagnosed with cholelithiasis along with choledocholithiasis  from 1stJanuary 2019 to 30thJune, 2020. Results: In group 1 out of 75 patients 7 patients developed complications in post operative period compared to 35 patients out of 75 patients developed complications in group 2. The The mean hospital stay (in day) in group 1 patients was 2.26, median 2 and the mean of group 2 was 5.26, median 5. Conclusion: To conclude in our study there has been found significant advantage of early laparoscopic cholecystecomy following ERCP over the late group to minimize complications and promote early recovery of the patients. Keywords: ERCP, Cholecystectomy, Endoscopic retrograde cholangiopancreatography

Sign in / Sign up

Export Citation Format

Share Document