scholarly journals High-Speed Twin Roll Casting of Thin Aluminum Alloy Strips Containing Fe Impurities

2005 ◽  
Vol 46 (12) ◽  
pp. 2596-2601 ◽  
Author(s):  
Toshio Haga ◽  
Masaaki Ikawa ◽  
Hisaki Watari ◽  
Kenta Suzuki ◽  
Shinji Kumai
Keyword(s):  
Aluminum Alloy ◽  
High Speed ◽  
Twin Roll Casting ◽  
Roll Casting ◽  
Thin Aluminum ◽  
Twin Roll ◽  
Fe Impurities

Microstructural Evolution of Al-Mn Based Alloy Fabricated by Vertical-Type High-Speed Twin-Roll Casting

2016 ◽  
Vol 877 ◽  
pp. 51-55 ◽  
Author(s):  
Ram Song ◽  
Yohei Harada ◽  
Shinji Muraishi ◽  
Shinji Kumai
Keyword(s):  
Aluminum Alloy ◽  
Grain Boundaries ◽  
High Speed ◽  
Cooling System ◽  
Central Area ◽  
Eutectic Structure ◽  
Chemical Compositions ◽  
Twin Roll Casting ◽  
Roll Casting ◽  
Twin Roll

For decades, twin-roll casting has been applied for manufacturing aluminum alloy sheets. This conventional process contributes to make thin aluminum sheets from the molten metal directly. Recently, vertical-type high-speed twin-roll casting (HSTRC) has been developed with much higher casting speed rather than the horizontal-type. Some modifications such as feeding nozzle and water-cooling system of copper rolls contribute to increase cooling rates. This characteristic leads to many metallurgical advantages like grain refinement, super-saturation of alloying elements and fine distribution of secondary particles. The objective of this study is to investigate the constituent particles in HSTRC aluminum alloy. The commercial Al-Mn alloy strip was successfully fabricated by HSTRC. Clearly different microstructure was found in thickness direction. Many constituent particles observed along the grain boundaries/cell boundaries as well as inside of Al matrix on the surface area, while eutectic structure around globular grain boundaries was observed in mid-central area. The morphology as well as chemical compositions of the constituent particles were investigated.

Application of Vertical-Type High-Speed Twin-Roll Casting for Up-Grade Recycling and Clad Sheets Fabrication of Aluminum Alloys

2016 ◽  
Vol 877 ◽  
pp. 56-61 ◽  
Author(s):  
Shinji Kumai ◽  
Yusuke Takayama ◽  
Ryoji Nakamura ◽  
Daisuke Shimosaka ◽  
Yohei Harada ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Aluminum Alloy ◽  
High Speed ◽  
Cast Aluminum Alloy ◽  
Cast Aluminum ◽  
Casting Method ◽  
Twin Roll Casting ◽  
Roll Casting ◽  
Twin Roll Cast ◽  
Twin Roll

A horizontal-type twin roll casting method has been popular for producing aluminum alloy strips, however, it is characterized by a relatively low productivity (1~6 m/min). In contrast, a vertical-type high-speed twin-roll casting method possesses an extremely high productivity (60~120 m/min (1~2 m/s)) and an excellent heat extraction ability. The rapid cooling effect provided significant microstructure refinement and mechanical properties improvement in various kinds of cast aluminum alloy products. Not only “product to product recycling” but also “up-grade recycling” can be achieved by making good use of these merits. Two examples of application showing the potential of vertical-type high-speed twin roll casting method are presented. (1) Several kinds of Al-Si base alloy were cast into the strips. Not only strength and toughness but also formability was increased in the twin roll cast products. In particular, great improvement in deformability shows the potential of the twin-roll cast aluminum alloy products as substitutes for some wrought aluminum alloy products. (2) The vertical-type tandem twin-roll caster was able to fabricate a clad strip by single step. The A4045/A3003/A4045 aluminum alloy clad sheets produced by the twin-roll casting showed better mechanical properties than the conventional hot-roll bonded clad sheets.

Inline Rolling of 5182 Aluminum Alloy Strip Cast by a Vertical Type High Speed Twin Roll Caster

2010 ◽  
Vol 139-141 ◽  
pp. 477-480
Author(s):  
Ryoji Nakamura ◽  
Shuya Hanada ◽  
Shinji Kumai ◽  
Hisaki Watari
Keyword(s):  
Aluminum Alloy ◽  
High Speed ◽  
Rolling Speed ◽  
Center Line ◽  
Alloy Strip ◽  
Ripple Mark ◽  
Roll Casting ◽  
Strip Cast ◽  
Twin Roll Caster ◽  
Twin Roll

An inline hot rolling was operated on 5182 aluminum alloy strip cast using a vertical type high speed caster (VHSTRC) at the speed of 60 m/min. A porosity existing at center line of the thickness and a ripple mark on the surface, these are typical defects of the strip cast by the VHSTRC, could be improved by the inline rolling. The rolling speed was as same as the roll-casting-speed of 60m/min. The temperature of the strip, when the inline rolling was operated, was 450oC. The reduction of the strip of the inline rolling was 35%.

Effect of Magnetostatic Field on Microstructure of 7075 Aluminum Alloy Strip Manufactured by Twin-Roll Casting

2013 ◽  
Vol 652-654 ◽  
pp. 2427-2431 ◽  
Author(s):  
Xin Su ◽  
G M Xu ◽  
Y H Feng
Keyword(s):  
Electromagnetic Field ◽  
Aluminum Alloy ◽  
Central Zone ◽  
Alloy Strip ◽  
7075 Aluminum Alloy ◽  
Magnetostatic Field ◽  
Dendritic Crystal ◽  
Twin Roll Casting ◽  
Roll Casting ◽  
Twin Roll

In this paper, the effect of magnetostatic field on the microstructure and microsegregation of 7075 aluminum alloy strip by twin-roll casting is researched , and the result shows that when no electromagnetic field is applied during the process of roll-casting , the microstructure of 7075 strip is most composed of coarse columnar and dendritic crystal , the direction of grains is equal to roll-casting direction. When the magnetostatic field with 0.13T intensity is applied during the twin-roll casting, the microstructural of strip becomes uniform ,refined and equiaxed at the central zone of strip, and the dendritic crystal at the surficial is disordered and refined significantly.

scholarly journals A Novel Approach to Improve the Microstructure and Mechanical Properties of Al–Mg–Si Aluminum Alloys during Twin-Roll Casting

Materials ◽  
2020 ◽  
Vol 13 (7) ◽  
pp. 1713 ◽  
Author(s):  
Yong Li ◽  
Chen He ◽  
Jiadong Li ◽  
Zhaodong Wang ◽  
Di Wu ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Aluminum Alloy ◽  
Crystallization Front ◽  
Alloying Elements ◽  
Cast Slab ◽  
Energy Dispersion Spectroscopy ◽  
Twin Roll Casting ◽  
Roll Casting ◽  
Twin Roll Cast ◽  
Twin Roll

The main purpose of this present study was to investigate the different processing conditions on the microstructure, segregation behavior of alloying elements, and mechanical properties of Al−Mg−Si alloy twin-roll cast slab prepared using a novel twin-roll casting technology. The simulation of temperature field, distribution of alloying elements, tensile properties, hardness, and conductivity were examined by a Leica optical microscope, scanning electron microscopy, energy dispersion spectroscopy, electron probe microanalysis, and tensile tests. The results indicated that when the traditional twin-roll casting method was used to produce aluminum alloy strip, there are obvious centerline segregation defects due to the deep crystallization front depth and symmetrical solidification characteristics. When the forced-cooling technology was applied in the twin-roll casting process, by virtue of the changing of crystallization front depth and crystallization front shape, the segregation defects are obviously suppressed. Suggesting that this method can significantly improve the uniformity of alloying elements in the thickness direction of the twin-roll cast slab, ultimately improve the mechanical properties of AA6022 aluminum alloy.

High Speed Twin-Roll Casting of Al-Mg Alloys

2010 ◽  
Vol 154-155 ◽  
pp. 1544-1548 ◽  
Author(s):  
Kosuke Komeda ◽  
Ryoji Nakamura ◽  
Shinji Kumai
Keyword(s):  
Heat Transfer ◽  
Aluminum Alloy ◽  
High Speed ◽  
Aluminum Alloy 5182 ◽  
Roll Casting ◽  
Twin Roll Caster ◽  
Deep Drawing Test ◽  
Study Heat Transfer ◽  
Twin Roll ◽  
Steel Rolls

The disadvantages of the conventional twin-roll caster for aluminum alloy are low casting speeds and limited choices of alloys that are castable by this processing. It is known that strip casting of aluminum alloy 5182 is very difficult because of their wider freezing zones. The vertical-type high-speed twin-roll caster used in the present study was devised to overcome these disadvantages. Features of the high speed twin roll casters are as below. Mild steel rolls were used in order to increase the casting speed and to be made at a lower equipment cost. Roll coating is produced in casting of Al-Mg alloy. Therefore lubricant, that resists heat transfer, was not used in the present study. Heat transfer between melt and the roll was improved by hydrostatic pressure of the melt. Low superheat casting was carried out in order to improve microstructure of the strip. In the present study, effectiveness of a high-speed twin roll caster for recycling aluminum alloy was investigated. The effects of the high-speed twin roll caster on alleviating the deterioration of mechanical properties by impurities were investigated. Properties of the cast strip were investigated by metalography, a tension test, and a deep drawing test.

Sign in / Sign up

Export Citation Format

Share Document