scholarly journals Influence of procedural noise on the glossiness of 2.5D printed patches

2021 ◽  
Vol 2021 (29) ◽  
pp. 105-110
Author(s):  
Abigail Trujillo Vazquez ◽  
Donatela Šarić ◽  
Susanne Klein ◽  
Carinna Parraman
Keyword(s):  
High Resolution ◽  
Low Cost ◽  
Surface Structures ◽  
Uv Curable ◽  
Procedural Approach ◽  
Perlin Noise ◽  
Elevation Data ◽  
Specular Gloss ◽  
Printing Method ◽  
Effect Of Surface

Perlin noise, a type of procedural noise, was used for the design of elevation files for 2.5D printing. This printing method uses elevation data from a height map to create physical relief by superimposing layers of ink. In this experiment, the grayscale values of noise functions were used as elevation values to build different surface structures in UV curable ink by 2.5D printing. Printed samples with varying levels of Perlin noise were created and their reflectance properties were studied by measuring the values of specular gloss. The roughness and specular gloss of the printed surfaces were effectively influenced when varying the persistence and octaves of the noise functions. The aim of implementing the procedural approach to a high-resolution printing method has been to explore the reflectance properties of custom noise functions when transferred to the physical realm. This might contribute to better understand the effect of surface structure on the appearance of materials. Potentially, this approach will enable the use of relief printing to produce structures with a more natural appearance and a desired gloss value by using a low-cost computing process.

NeuroPort: Retractor tubular personalizado para cirugías mínimamente invasivas fabricado mediante impresión 3D por estereolitografía

2021 ◽  
Author(s):  
◽  
C. J. González Leal
Keyword(s):  
High Resolution ◽  
3D Printing ◽  
Brain Tumors ◽  
Vascular Malformations ◽  
Low Cost ◽  
Lighting System ◽  
Minimal Invasion ◽  
The Brain ◽  
Intended Use ◽  
Printing Method

NeuroPort is a low cost customized biodevice for minimal invasion surgeries designed within Servicio Neurocirugía UANL and Departamento de Ingeniería Biomédica; and manufactured by stereolithography, a high- resolution 3D printing method. This biodevice provides a channel of approach for subcortical and intraventricular cerebral surgical procedures with an intended use in the treatment of diseases such as brain tumors, anomalies or vascular malformations, parenchymal hematomas, among others. It has a design that minimizes tissue damage by displacing the tissues of the brain during the advance toward the desired abnormality; in addition to its integration with neuronavigational equipment and its own lighting system. All these features designed to make the surgical procedure faster and safer for the patient, facilitating the work of the neurosurgeon.

scholarly journals Fabrication and Compressive Behavior of a Micro-Lattice Composite by High Resolution DLP Stereolithography

Polymers ◽  
2021 ◽  
Vol 13 (5) ◽  
pp. 785
Author(s):  
Chow Shing Shin ◽  
Yu Chia Chang
Keyword(s):  
High Resolution ◽  
Lattice Structure ◽  
Low Cost ◽  
Hierarchical Structures ◽  
Dip Coating ◽  
Unit Cell ◽  
Digital Light Processing ◽  
Unit Cell Size ◽  
Wide Range ◽  
And Performance

Lattice structures are superior to stochastic foams in mechanical properties and are finding increasing applications. Their properties can be tailored in a wide range through adjusting the design and dimensions of the unit cell, changing the constituent materials as well as forming into hierarchical structures. In order to achieve more levels of hierarchy, the dimensions of the fundamental lattice have to be small enough. Although lattice size of several microns can be fabricated using the two-photon polymerization technique, sophisticated and costly equipment is required. To balance cost and performance, a low-cost high resolution micro-stereolithographic system has been developed in this work based on a commercial digital light processing (DLP) projector. Unit cell lengths as small as 100 μm have been successfully fabricated. Decreasing the unit cell size from 150 to 100 μm increased the compressive stiffness by 26%. Different pretreatments to facilitate the electroless plating of nickel on the lattice structure have been attempted. A pretreatment of dip coating in a graphene suspension is the most successful and increased the strength and stiffness by 5.3 and 3.6 times, respectively. Even a very light and incomplete nickel plating in the interior has increase the structural stiffness and strength by more than twofold.

A HIGH-RESOLUTION 2D IMAGING LASER RADAR FOR OCCLUDED HARD TARGET VIEWING AND IDENTIFICATION

2008 ◽  
Vol 18 (02) ◽  
pp. 393-400 ◽  
Author(s):  
ROBERT J. GRASSO ◽  
JOHN C. WIKMAN ◽  
DAVID P. DROUIN ◽  
GEORGE F. DIPPEL ◽  
PAUL I. EGBERT
Keyword(s):  
High Resolution ◽  
Target Identification ◽  
Low Cost ◽  
System Size ◽  
Operating Conditions ◽  
Array Technology ◽  
Diode Pumped ◽  
Target Ranging ◽  
2D Imaging ◽  
Gated Imaging

BAE SYSTEMS has developed a Low Cost Targeting System (LCTS) consisting of a FLIR for target detection, laser-illuminated, gated imaging for target identification, laser rangefinder and designator, GPS positioning, and auto-tracking capability within a small compact system size. The system is based upon BAE Systems proven micro-bolometer passive LWIR camera coupled with Intevac's new EBAPS camera. A dual wavelength diode pumped laser provides eyesafe ranging and target illumination, as well as designation; a custom detector module senses the return pulse for target ranging and to set the range gates for the gated camera. Trials show that the current detectors offer complete extinction of signals outside of the gated range, thus, providing high resolution within the gated region. The images have shown high spatial resolution arising from the use of solid state focal plane array technology. Imagery has been collected in both the laboratory and the field to verify system performance during a variety of operating conditions.

High-Resolution Monitoring of Atmospheric Pollutants Using a System of Low-Cost Sensors

2014 ◽  
Vol 52 (7) ◽  
pp. 3823-3832 ◽  
Author(s):  
Sutharshan Rajasegarar ◽  
Timothy C. Havens ◽  
Shanika Karunasekera ◽  
Christopher Leckie ◽  
James C. Bezdek ◽  
...  
Keyword(s):  
High Resolution ◽  
Low Cost ◽  
Atmospheric Pollutants

scholarly journals High-Resolution Atmospheric Sensing of Multiple Atmospheric Variables Using the DataHawk Small Airborne Measurement System

2013 ◽  
Vol 30 (10) ◽  
pp. 2352-2366 ◽  
Author(s):  
Dale A. Lawrence ◽  
Ben B. Balsley
Keyword(s):  
High Resolution ◽  
Measurement System ◽  
Current System ◽  
Low Cost ◽  
Structure Constant ◽  
Turbulence Structure ◽  
Quality Of Data ◽  
Airborne Measurement ◽  
Atmospheric Measurement ◽  
Atmospheric Variables

Abstract The DataHawk small airborne measurement system provides in situ atmospheric measurement capabilities for documenting scales as small as 1 m and can access reasonably large volumes in and above the atmospheric boundary layer at low cost. The design of the DataHawk system is described, beginning with the atmospheric measurement requirements, and articulating five key challenges that any practical measurement system must overcome. The resulting characteristics of the airborne and ground support components of the DataHawk system are outlined, along with its deployment, operating, and recovery modes. Typical results are presented to illustrate the types and quality of data provided by the current system, as well as the need for more of these finescale measurements. Particular focus is given to the DataHawk's ability to make very-high-resolution measurements of a variety of atmospheric variables simultaneously, with emphasis given to the measurement of two important finescale turbulence parameters, (the temperature turbulence structure constant) and ɛ (the turbulent energy dissipation rate). Future sensing possibilities and limitations using this approach are also discussed.

scholarly journals Low cost, multiscale and multi-sensor application for flooded areas mapping

2017 ◽  
Author(s):  
Daniele Giordan ◽  
Davide Notti ◽  
Alfredo Villa ◽  
Francesco Zucca ◽  
Fabiana Calò ◽  
...  
Keyword(s):  
High Resolution ◽  
Low Cost ◽  
Essential Elements ◽  
Basin Scale ◽  
High Resolution Images ◽  
Maximum Water ◽  
Urbanized Areas ◽  
Flooded Area ◽  
Elevation Model ◽  
Flooded Areas

Abstract. Flood mapping and estimation of maximum water depth are essential elements for a first damages evaluation, civil protection interventions planning and detection of areas where remedial are more needed. In this work, we present and discuss a methodology for mapping and quantifying flood severity over plain areas. The proposed methodology considers a multiscale and multi-sensor approach using free or low-cost data/sensors. We applied this method to November 2016 Piemonte (NW Italy) flood. We first mapped flooded areas at basin scale using free satellite data from low to medium-high resolution using both SAR (Sentinel-1, Cosmo-Skymed) and multispectral sensors (MODIS, Sentinel-2). Using very- and ultra- high-resolution images from the low-cost aerial platform and Remotely Piloted Aerial System, we refined the flooded zone, and we detected the most damaged sector. The presented method considers both urbanized and not urbanized areas. Nadiral images have several limitations in particular in urbanized areas, where the use of terrestrial images solved this limitation. Very- and ultra-high resolution images have been processed with Structure from Motion (SfM) for the realization of 3-D models. These data, combined with available digital elevation model, allowed us to obtain maps of flooded area, maximum water high and damaged infrastructures.

Complement C3 Genotyping of Slow and Fast Variants by Real Time PCR-High Resolution Melting

2012 ◽  
Vol 10 (3) ◽  
pp. 329-334 ◽  
Author(s):  
D.M. Valero-Hervás ◽  
P. Morales ◽  
M.J. Castro ◽  
P. Varela ◽  
M. Castillo-Rama ◽  
...  
Keyword(s):  
High Resolution ◽  
Real Time ◽  
Real Time Pcr ◽  
High Resolution Melting ◽  
Low Cost ◽  
Complement C3 ◽  
Amplification Refractory Mutation System ◽  
Rt Pcr ◽  
Dna Amount ◽  
Mutation System

“Slow” and “Fast” C3 complement variants (C3S and C3F) result from a g.304C>G polymorphism that changes arginine to glycine at position 102. C3 variants are associated with complement-mediated diseases and outcome in transplantation. In this work C3 genotyping is achieved by a Real Time PCR - High Resolution Melting (RT-PCR-HRM) optimized method. In an analysis of 49 subjects, 10.2% were C3FF, 36.7% were C3SF and 53.1% were C3SS. Allelic frequencies (70% for C3S and 30% for C3F) were in Hardy-Weinberg equilibrium and similar to those published previously. When comparing RT-PCR-HRM with the currently used Tetraprimer-Amplification Refractory Mutation System PCR (T-ARMS-PCR), coincidence was 93.8%. The procedure shown here includes a single primer pair and low DNA amount per reaction. Detection of C3 variants by RT-PCR-HRM is accurate, easy, fast and low cost, and it may be the method of choice for C3 genotyping.

Sign in / Sign up

Export Citation Format

Share Document