scholarly journals Effective Chromium Extraction from Chromium-containing Vanadium Slag by Sodium Roasting and Water Leaching

2012 ◽  
Vol 52 (11) ◽  
pp. 1958-1965 ◽  
Author(s):  
Hai-Xing Fang ◽  
Hong-Yi Li ◽  
Bing Xie
Keyword(s):  
Vanadium Slag ◽  
Water Leaching

scholarly journals Efficient Separation of Silicon and Vanadium by Sodium Roasting-Water Leaching from Vanadium Slag and CaV2O6 Preparation

Crystals ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 255
Author(s):  
Changqing Li ◽  
Haichao Zhang ◽  
Ma Tao ◽  
Xufeng Wang ◽  
Hang Li ◽  
...  
Keyword(s):  
New Product ◽  
Molar Ratio ◽  
Migration Behavior ◽  
Vanadium Slag ◽  
Water Leaching ◽  
Solid Ratio ◽  
Leaching Solution ◽  
Micro Morphology ◽  
Precipitation Ratio ◽  
Separation Behavior

Calcium vanadate (CaV2O6), a new product of vanadium precipitation, was obtained from vanadium slag by sodium roasting-water leaching and calcium precipitation. The separation behavior of vanadium and silicon in vanadium slag during sodium roasting and water leaching was systematically studied, and micro-morphology and valence migration behavior of vanadium and Fe in vanadium slag, roasting slag, and residue were revealed. The Na2CO3 was added to the vanadium slag at 20% mass fraction, roasted at 790 ℃, and kept for 120 min, the roasted sample was added to the deionized aqueous solution with a liquid-solid ratio of (L/S) 5mL/g, and then heated at 90 ℃ for 60 min, 89.54% vanadium and 1.96% chromium were extracted. Sodium carbonate tends to combine with vanadium to form sodium vanadate, while silicon is easy to combine with Fe and Na to form acmite (NaFeSi2O6). When the molar ratio of N (Ca/V) is 0.6 and CaO, is added to adjust the pH of vanadium leaching solution to 6.7 ± 0.1 and precipitate 90 min at 90 ℃, vanadium is precipitated in the form of CaV2O6 with a purity of 95.69%, under these conditions, the precipitation ratio is 95.03%.

Effective Extraction of Vanadium and Chromium from High Chromium Content Vanadium Slag by Sodium Roasting and Water Leaching

2016 ◽  
Vol 863 ◽  
pp. 144-148 ◽  
Author(s):  
Ming Li ◽  
Liang Xiao ◽  
Jing Jing Liu ◽  
Zhi Xin Shi ◽  
Zi Bi Fu ◽  
...  
Keyword(s):  
Chromium Content ◽  
Leaching Rate ◽  
Vanadium Slag ◽  
Water Leaching ◽  
Sodium Salts ◽  
High Chromium ◽  
Effective Factor ◽  
Roasting Process ◽  
Roasting Temperature ◽  
Roasting Time

The extraction of vanadium and chromium from high chromium content vanadium slag by salt roasting and water leaching process has been investigated, which uses mixed sodium salts (Na2CO3 and NaOH) as additive agent in roasting process. The mineralogical morphology was prospected by TG-DSC, XRD, SEM and EDS. The oxidation of slag and transversion of V/Cr-containing phase and sodium salts have been discussed. It has been demonstrated that the presence of NaOH contributes to decompose spinel and olivine phases, which is beneficial to reduce the roasting temperature and elevate V, Cr leaching ratio. The roasting parameters have been studied as a function of roasting temperature, roasting time and ratio of alkali, in which the roasting temperature is the most effective factor on the leaching rate of vanadium and chromium. Under the optimum condition, the leaching rates of V and Cr reached 95.8% and 97.6%, respectively.

Sequential extraction of vanadium and chromium from chromium-bearing vanadium slag through two-stage soda roasting-water leaching

2018 ◽  
Vol 115 (6) ◽  
pp. 607
Author(s):  
Helin Fan ◽  
Huamei Duan ◽  
Wenjie He ◽  
Dengfu Chen ◽  
Tao Liu ◽  
...  
Keyword(s):  
Sequential Extraction ◽  
Extraction Process ◽  
Water Soluble ◽  
Leaching Rate ◽  
Vanadium Slag ◽  
X Ray Diffraction ◽  
Water Leaching ◽  
Two Stage ◽  
Experimental Conditions ◽  
Roasting Process

The sequential extraction of vanadium and chromium from the chromium-bearing vanadium slag through two-stage soda roasting-water leaching was proposed. The precipitation order and thermodynamic stability of Cr-spinel and V-spinel were thoroughly calculated with FactSage 6.3 software. The mechanism of the sequential extraction process is further determined by X-ray diffraction (XRD). Thermodynamic calculations show that the precipitation order of main phases in the chromium-bearing vanadium slag is as follows: Cr-spinel → V-spinel → Fe-olivine, while the priority of the reaction between main phases with Na2CO3 follows the order of Fe-olivine → V-spinel → Cr-spinel. XRD results reveal that the vanadium-bearing phase in roasted slag is water-soluble NaVO3, while the chromium-bearing phase in roasted slag is Cr-spinel ((Mn, Fe) Cr2O4) and solid solutions ((Fe0.6Cr0.4)2 O3) with the soda amount of 21% and temperature of 800 °C. The different evolution route of vanadium-bearing phase and chromium-bearing phase during the roasting process ensures preferential extraction of vanadium from the chromium-bearing vanadium slag. The leaching rates of vanadium and chromium reach 89.36% and 4.91% with optimized experimental conditions. The high leaching rate of vanadium and low leaching rate of chromium show good results of preferential extraction of vanadium from the chromium-bearing vanadium slag.

Asynchronous extraction of vanadium and chromium from vanadium slag by stepwise sodium roasting–water leaching

2015 ◽  
Vol 156 ◽  
pp. 124-135 ◽  
Author(s):  
Hong-Yi Li ◽  
Hai-Xing Fang ◽  
Kang Wang ◽  
Wang Zhou ◽  
Zhao Yang ◽  
...  
Keyword(s):  
Vanadium Slag ◽  
Water Leaching

Non-isothermal crystallization behavior of spinel crystals in FeO-SiO2-TiO2-V2O3-Cr2O3 slag

2018 ◽  
Vol 116 (1) ◽  
pp. 110
Author(s):  
Lixiong Shao ◽  
Jiang Diao ◽  
Wang Zhou ◽  
Tao Zhang ◽  
Bing Xie
Keyword(s):  
Cooling Rate ◽  
Crystallization Behavior ◽  
Crystal Size ◽  
Growth Mechanisms ◽  
Vanadium Slag ◽  
Growth Behaviour ◽  
Temperature Range ◽  
Chromium Spinel ◽  
Mean Diameter ◽  
The Mean

The growth behaviour of spinel crystals in vanadium slag with high Cr2O3 content was investigated and clarified by statistical analyses based on the Crystal Size Distribution (CSD) theory. The results indicate that low cooling rate and Cr2O3 content benefit the growth of spinel crystals. The chromium spinel crystals firstly precipitated and then acted as the heterogeneous nuclei of vanadium and titanium spinel crystals. The growth mechanisms of the spinel crystals at the cooling rate of 5 K/min consist two regimes: firstly, nucleation control in the temperature range of 1873 to 1773 K, in which the shapes of CSD curves are asymptotic; secondly, surface and supply control within the temperature range of 1773 to 1473 K, in which the shapes of CSD curves are lognormal. The mean diameter of spinel crystals increases from 3.97 to 52.21 µm with the decrease of temperature from 1873 to 1473 K.

Effect of water leaching on the adhesion of composite resin to bleached and unbleached bovine enamel

1991 ◽  
Vol 17 (4) ◽  
pp. 156-160 ◽  
Author(s):  
C.D. Torneck ◽  
K.C. Titley ◽  
D.C. Smith ◽  
A. Adibfar
Keyword(s):  
Composite Resin ◽  
Water Leaching ◽  
Effect Of Water ◽  
Bovine Enamel

scholarly journals Effect of Water Leaching on Photodegraded Scots Pine and Spruce Timbers Monitored by FTIR Spectroscopy

Forests ◽  
2021 ◽  
Vol 12 (7) ◽  
pp. 833
Author(s):  
Edina Preklet ◽  
László Tolvaj ◽  
Eszter Visi-Rajczi ◽  
Tamás Hofmann
Keyword(s):  
Ftir Spectroscopy ◽  
Scots Pine ◽  
Uv Irradiation ◽  
Chemical Elements ◽  
Uv Light ◽  
Carbonyl Groups ◽  
Water Leaching ◽  
Absorption Bands ◽  
Chemical Changes ◽  
Absorption Increase

The goal of this research was the systematic study and comparison of the divided individual effects of UV light irradiation and water leaching during artificial weathering. Spruce (Picea abies Karst.) and Scots pine (Pinus sylvestris L.) samples were irradiated by ultraviolet (UV) light. Another sequence of samples was treated with the combination of UV irradiation and water leaching. The total extent of UV treatment was 20 days for both series of samples. Time relation of UV irradiation and water leaching was 2:1. The chemical changes were observed by FTIR spectroscopy. The difference spectrum was used for determination of the chemical changes. Degradation of lignin was greater for the leached samples than for the pure UV treated samples. Scots pine suffered greater lignin degradation than spruce, and produced higher absorption increase on the absorption region of unconjugated carbonyls. The unconjugated carbonyl groups were the most responsive chemical elements to leaching. Spruce was more susceptible to leaching of unconjugated carbonyl groups than Scots pine. Two absorption bands of unconjugated carbonyl groups at 1706 and 1764 cm−1 wavenumbers were produced by photodegradation. The absorption band at 1764 cm−1 was more sensitive to water leaching than the band at 1706 cm−1.

Recovery and separation of Fe and Mn from simulated chlorinated vanadium slag by molten salt electrolysis

2020 ◽  
Vol 27 (12) ◽  
pp. 1678-1686 ◽  
Author(s):  
Shi-yuan Liu ◽  
Yu-lan Zhen ◽  
Xiao-bo He ◽  
Li-jun Wang ◽  
Kuo-chih Chou
Keyword(s):  
Molten Salt ◽  
Vanadium Slag ◽  
Molten Salt Electrolysis ◽  
Fe And Mn
Sign in / Sign up

Export Citation Format

Share Document