scholarly journals Information modeling technologies at design of hydraulic facilities

2020 ◽  
Vol 17 (4) ◽  
pp. 54-57
Author(s):  
E. Yu. Kurilo ◽  
◽  
D. V. Nizhegorodtsev ◽  
Keyword(s):  
Russian Federation ◽  
Building Information Modeling ◽  
Pilot Project ◽  
Hydraulic Engineering ◽  
Information Modeling ◽  
Software Systems ◽  
Construction Companies ◽  
Building Information ◽  
The Russian Federation ◽  
Marine Engineering

There takes place an intensive integration of building information modeling (BIM) in the activities of design and construction companies of the Russian Federation, including the hydraulic engineering segment. Existing software systems for building information modeling are not adapted for the design of marine engineering. This article is devoted to the study of the problem and the development of specialized solutions in this area (new or based on the existing software).The process of creating a hydraulic engineering pilot project, including the necessary libraries of basic elements, is considered. An enlarged plan for the integration of BIM to the marine engineering is proposed.

scholarly journals THE DESIGN OF TOPSIS4BIM DECISION SUPPORT FOR BUILDING INFORMATION MODELING SOFTWARE SELECTION

2015 ◽  
Vol 77 (5) ◽  
Author(s):  
Ahmad Taufik Nursal ◽  
Mohd Faizal Omar ◽  
Mohd Nasrun Mohd Nawi
Keyword(s):  
Building Information Modeling ◽  
Rapid Development ◽  
Information Modeling ◽  
Software Selection ◽  
Information Communication ◽  
Construction Companies ◽  
New Information ◽  
Building Information ◽  
Modeling Software ◽  
High Investment

The emerging of new Information Communication Technology (ICT) technology namely Building Information Modeling been proven benefits toward construction industry. As a result, the list of BIM software available in the market is keep increasing in recent years. This has led to the selection problem among construction companies. Moreover, the selection BIM software also required high investment in term of software, hard ware and training expenses. These aforementioned issues have increased the complexities of decision process and the need of decision aid in BIM software selection. Thus, this paper has introduced a new approach in MCDMDSS web development by utilization of Web 2.0 application. The rapid development of Information technology has highly benefit to the development of web based DSS. The design and validation architecture of a web base DSS called topsis4BIM for Building Information Modeling (BIM) is presented. 

scholarly journals PROSPECTS FOR THE INTRODUCTION OF BIM-TECHNOLOGIES

2021 ◽  
pp. 58-63
Author(s):  
Valeriya Yu. Gulik ◽  
Keyword(s):  
Construction Industry ◽  
Performance Indicators ◽  
Building Information Modeling ◽  
Building Design ◽  
Information Modeling ◽  
Competitive Advantages ◽  
New Approach ◽  
Construction Companies ◽  
Building Information ◽  
Design Construction

Building Information Modeling (BIM) has revolutionized the construction industry. Currently, it is impossible to imagine the industry without this fundamentally new approach to building design and working with documentation. The integration of design, construction, approval and monitoring processes through BIM is an effective way to improve the economic, environmental and other key performance indicators of construction companies, and thus increase their competitive advantages. However, it is too early to talk about the widespread transition of industry organizations to BIM. This article describes the advantages of information modeling technologies and the complexity of their implementation in the workflow.

scholarly journals Limitation Factors of Building Information Modeling (BIM) Implementation

2019 ◽  
Vol 13 (1) ◽  
pp. 189-196
Author(s):  
Mohammed A. Enshassi ◽  
Khalid A. Al Hallaq ◽  
Bassam A. Tayeh
Keyword(s):  
Building Information Modeling ◽  
Information Modeling ◽  
High Rate ◽  
Management Support ◽  
Snowball Sampling ◽  
Construction Companies ◽  
Total Response Rate ◽  
Building Information ◽  
Rate Of Response ◽  
Structured Questionnaire

Background:Building Information Modeling (BIM) has been recommended as the best tool to improve construction processes by many researchers. However, most construction companies do not adopt BIM because there are many limitations slowing BIM adoption.Objective:The aim of this paper is to investigate the factors that limit BIM implementation in the construction industry.Methods:To investigate the research objectives, a quantitative approach was adopted and a structured questionnaire was designed. A total of sixty-eight copies of the questionnaire were distributed and sixty-five of them were satisfactorily completed, making the total response rate = 95.58%. Snowball sampling method helped to obtain a high rate of response and thus increase accuracy.Results and Conclusion:BIM limitation factors were divided into five categories. The results illustrated that the personnel category was ranked as the most important, while the legal category was ranked as the least important. Findings showed that requirement of large culture change within the organization, lack of senior management support, lack of knowledge on how to implement BIM, lack of staff experience and skills, and need to change in workflows to comply with the new requirements were ranked as the most important factors that obstacle BIM implementation.

Application of BIM Process by the Evaluation of Building Energy Sustainability

2014 ◽  
Vol 899 ◽  
pp. 7-10 ◽  
Author(s):  
Marek Jašek ◽  
Jan Česelský ◽  
Pavel Vlček ◽  
Marcela Černíková ◽  
Eva Wernerova Berankova
Keyword(s):  
Czech Republic ◽  
Building Information Modeling ◽  
Building Energy ◽  
Information Modeling ◽  
Building Industry ◽  
Energy Sustainability ◽  
The Czech Republic ◽  
Construction Companies ◽  
Building Information ◽  
Planning And Operation

The use of building information modeling (BIM) in the Czech Republic is currently at the stage of being slowly established in the Czech building environment. From the viewpoint of applicability in the building industry, the issues of BIM in the Czech Republic are very desirable, mainly because of ever-increasing pressure on the sustainability of construction. This approach is gradually used by some, often multinational, construction companies. The article focuses on finding the possible optimization of approach to the planning and operation of buildings in terms of the energy sustainability of buildings.

scholarly journals Interdisciplinary Framework: A Building Information Modeling Using Structural Equation Analysis in Lean Construction Project Management

2021 ◽  
Author(s):  
Dante Silva ◽  
Kevin Lawrence De Jesus ◽  
Bernard Villaverde ◽  
Andrea Isabelle Enciso ◽  
Amanda Nicole Mecija ◽  
...  
Keyword(s):  
Project Management ◽  
Structural Equation ◽  
Building Information Modeling ◽  
Construction Project ◽  
Lean Construction ◽  
Information Modeling ◽  
Lean Principles ◽  
Construction Companies ◽  
Building Information ◽  
Interdisciplinary Framework

The construction process and construction management are highly reliant on the interaction between the triple constraints of project management of quality: scope, time, and cost. The industry has incorporated certain principles and technology, such as lean-based construction principles and Building Information Modeling (BIM), to maximize the time, quality, and cost-efficiency of various construction projects. Analysis and assessment of the factors and functionalities are needed to show their synergic relationships and determine their significant impact on the construction project using Structural Equation Modeling (SEM). To gather information, a survey was conducted on the different construction companies in the Philippines. The results generated a model interrelating the triple constraints of project management and how they are affected by incorporating BIM and lean construction principles. The models created established a significant relationship towards all the tripe constraints considering both individual and combined functionalities and factors. An interdisciplinary framework incorporating both BIM and lean principles is conformed to optimize construction stages based on the triple constraints of project management.

scholarly journals Contractual Framework for Design- Bid- Build Contract to Adopt Building Information Modeling in Jordan

2020 ◽  
Vol 9 (5) ◽  
pp. 176-182
Keyword(s):  
Construction Industry ◽  
Building Information Modeling ◽  
Information Modeling ◽  
Construction Sector ◽  
Modeling Framework ◽  
Main Research ◽  
Construction Companies ◽  
Building Information ◽  
Research Findings ◽  
Design Bid Build

To provide contractual framework for Design-BidBuild (DBB) contract as reference for construction industry in Jordan, this paper aims to discuss the best contractual framework to adopt Building Information Modeling (BIM) under (DBB) approach in construction sector in Jordan. To achieve this aim, scope of comprehensive literature divided in two frameworks is explored. First, the construction sector in Jordan and the others is the building information modeling framework. In this research, a qualitative approach is employed, where 13 semi-structured meetings were implemented with the largest construction companies in Jordanian construction field. The main research' findings revealed that improvements in the DBB contract, adopting BIM officially in contract and improving stakeholders ' relationship are obtained. The study concluded that to adopt BIM process correctly, earlier participation of major stakeholders is essential to enhance the coordination grade, discovering early disputes and decreasing the redesign processes. This in turn, safes efforts, time and cost

Sign in / Sign up

Export Citation Format

Share Document