scholarly journals Development of Series Resonant Inverters for Induction Heating Applications

2018 ◽  
Vol 3 (12) ◽  
pp. 36-39
Author(s):  
Khairy Sayed ◽  
Farag Abo-Elyousr ◽  
Farid N. Abdelbar ◽  
Heba El-zohri
Keyword(s):  
Induction Heating ◽  
High Frequency ◽  
Cost Effective ◽  
Performance Comparison ◽  
Resonant Inverter ◽  
Series Resonance ◽  
Pulse Density ◽  
Series Resonant ◽  
In Series ◽  
Series Resonant Inverter

This paper proposes a cost-effective series resonant inverter employed in applications of induction heating. The proposed inverter operates with high-frequency pulse-density modulation strategy for soft-switching. The high-frequency operation (20 kHz – 100 kHz) of this inverter results in a nearly sinusoidal output that is suitable for relatively fixed output applications such as induction heating. The series resonance circuit comprises an inductor and a capacitor that are in series with the load. The small size of resonating components is due to the high-frequency switching operation. The practical effectiveness of induction heating power supply is substantially proved by implementing a prototype series resonant inverter. To analyze the performance, comparison between the simulation and experimental results is done by using PSIM program

High Power Density Multi-Mosfet-Based Series Resonant Inverter for Induction Heating Applications

2016 ◽  
Vol 7 (1) ◽  
pp. 107 ◽  
Author(s):  
M. Saravanan ◽  
A. Ramesh Babu
Keyword(s):  
Conversion Efficiency ◽  
Induction Heating ◽  
High Frequency ◽  
Low Voltage ◽  
Resonant Inverter ◽  
Power Simulation ◽  
Series Resonant ◽  
Series Resonant Inverter ◽  
State Resistance ◽  
Practical Constraints

Induction heating application uses uniquely high frequency series resonant inverter for achieving high conversion efficiency. The proposed work focus on improving the practical constraints in requiring the cooling arrangements necessary for switching devices used in resonant inverter due to higher switching and conduction losses. By introducing high frequency Multi- MOSFET based series resonant inverter for the application of induction heating with the following merits such as minimum switching and conduction losses using low voltage grade  of automotive MOSFET’s and higher conversion efficiency with high frequency operation. By adding series combination of low voltage ratedMulti MOSFET switches, temperature variation according to the on-state resistance issues can be avoided by sharing the voltage across the switches depends on number switches connected in the bridge circuit without comprising existing system performance parameter such as THD, power factor, output power. Simulation results also presents to verify that the proposed system achieve higher converter efficiency.

Designing of Improved Series Resonant Inverter with FPGA Controller for Heating Applications

2020 ◽  
pp. 2150088
Author(s):  
S. Dhayanandh ◽  
S. Manoharan
Keyword(s):  
High Frequency ◽  
Switching Frequency ◽  
Zero Voltage Switching ◽  
Resonant Inverter ◽  
Series Resonance ◽  
High Switching Frequency ◽  
Series Resonant ◽  
Higher Power ◽  
Series Resonant Inverter ◽  
And Control

Intensive utilization of Induction Heating (IH) innovations can be seen in numerous areas such as manufacturing industries, domestic or house hold and medicinal applications. The development of high switching frequency switches has encouraged the structure of high frequency inverters which are the key component of IH technology. Controlling the power output in a high frequency inverter for IH application is relatively complicated. This paper focuses on designing and developing a typical series resonance inverter and control it by FPGA-based controller. A MOSFET switch-based DC to AC converter is designed and Zero Voltage Switching (ZVS)-based switching strategy is accomplished to acquire less stress on switching devices and greater conversion efficiency. In this technique, secondary switched capacitor cell was proposed for resonant inverter of high frequency. To optimize the performance of the proposed inverter, the FPGA-based control system is implemented. Higher power density is the greatest advantage of this topology. The experimental and simulation model of the proposed series resonant inverter (SRI) for heating applications is developed and simulated using MATLAB/Simulink software.

scholarly journals Pulse Density Modulation Based Series Resonant Inverter Fed Induction Heater System

2018 ◽  
Vol 9 (2) ◽  
pp. 690
Author(s):  
S. Jaanaa Rubavathy ◽  
P. Murugesan
Keyword(s):  
Induction Heating ◽  
Output Voltage ◽  
Control Strategies ◽  
Resonant Inverter ◽  
Pulse Density ◽  
Series Resonant ◽  
Density Modulation ◽  
Simulation Results ◽  
Pulse Density Modulation ◽  
Series Resonant Inverter

This paper deals with implementation of a multi-output Series Resonant Inverter(SRI) for induction heating applications, which uses pulse density modulation(PDM) control for full bridge Series resonant inverters for output voltage and power control. It ensures better efficiency performances than conventional control strategies. The proposed converter can be considered as a two output extension of a full bridge inverter. This full bridge inverter can control the two outputs, simultaneously and independently, up to their rated powers, which reduces the usage of number of components as compared with conventional method. It also ensures higher utilization of switches used for its operation. A two output full bridge series resonant inverter is simulated and implemented. The Experimental results are compared with the simulation results.

scholarly journals A closed-loop power controller model of series-resonant-inverter-fitted induction heating system

2016 ◽  
Vol 65 (4) ◽  
pp. 827-841
Author(s):  
Palash Pal ◽  
Debabrata Roy ◽  
Avik Datta ◽  
Pradip K. Sadhu ◽  
Atanu Banerjee
Keyword(s):  
Induction Heating ◽  
High Frequency ◽  
Closed Loop ◽  
Heating System ◽  
Real Power ◽  
Resonant Inverter ◽  
Series Resonant ◽  
Series Resonant Inverter ◽  
Induction Heating System ◽  
Frequency Inverter

Abstract This paper presents a mathematical model of a power controller for a high-frequency induction heating system based on a modified half-bridge series resonant inverter. The output real power is precise over the heating coil, and this real power is processed as a feedback signal that contends a closed-loop topology with a proportional-integral-derivative controller. This technique enables both control of the closed-loop power and determination of the stability of the high-frequency inverter. Unlike the topologies of existing power controllers, the proposed topology enables direct control of the real power of the high-frequency inverter.

Sign in / Sign up

Export Citation Format

Share Document