scholarly journals A portable calorimeter for measuring the calorific value of natural gas

Author(s):  
Lyudmila Prysyazhnyuk ◽  
Ihor Petryshyn ◽  
Bohdan Dolishnii ◽  
Liubomyr Ropyak

Abstract Natural gas quality assessment is a relevant issue. A critical analysis of calorimeter designs for measuring the calorific value of natural gas was carried out. The most common methods for determining the calorific value of natural gas are as follows: direct by gas calorimeters; indirect by gas chromatographs; indirect, based on correlations. The advantages of isoperibolic calorimeters of measuring calorific value of natural gas directly in the consumer’s conditions are substantiated. The design of a portable calorimeter containing a thermostated shell, calorimetric tank, Peltier element with tank, circulating pump, gas burner, thermostat systems, metered supply of natural gas and air, fuel ignition, sensors, combustion analyzer and control and measurement unit, was developed. The geometric dimensions of the calorimetric tank are optimized, materials and technologies of manufacturing parts are specified. The metrological analysis of the developed portable calorimeter was carried out. A method for measuring the calorific value of natural gas directly in the conditions of household consumers and transport enterprises was developed. The results of testing the prototype calorimeter in the laboratory confirmed its high performance and metrological characteristics, and the deviation of the measurement of the calorific value of natural gas from that determined using a gas chromatograph was 0.6%.

2021 ◽  
Vol 2076 (1) ◽  
pp. 012020
Author(s):  
Huiyu Chen ◽  
Shanshan Li ◽  
Lili Zuo ◽  
Wanjun Li

Abstract At present, volume measurement is still used in transfer measurement of natural gas in China, so the calculation and management of Unaccounted for Gas are based on volume measurement. With the change of natural gas measurement method from volume measurement to energy measurement, the calculation and management of Unaccounted for Gas based on energy measurement will be paid more and more attention. This paper investigates the calculation methods and management measures of Unaccounted for Gas based on volume measurement in China and Unaccounted for Gas based on energy measurement in other countries, and compares the research progress. The results show that: the general principles of Unaccounted for Gas calculation in China and other countries are basically the same, but the calculation formulas are not completely the same. All countries consider the input gas, output gas, line pack variation and self-consumption gas. On this basis, Italy considers the known leakage, and Britain considers the known leakage and the daily calorific value shrinkage caused by its settlement rules. In order to reduce Unaccounted for Gas, the UK regularly verifies meter, carries out the research on Unaccounted for Gas baseline, and actively participates in the global Unaccounted for Gas benchmarking. Australia replaces the old main line and reduces the operation pressure of pipeline, which significantly reduces Unaccounted for Gas. The calculation methods and control measures of Unaccounted for Gas based on energy measurement in Italy, Britain and Australia can be used for reference in China.


2019 ◽  
Author(s):  
Ibrahim Arman

<p>This study aimed at investigating the Effectiveness of Mantle of the Expert in creative thinking Skills among the 7<sup>th</sup> Graders. The study conducted on a sample of 7<sup>th</sup> Graders at Kober Secondary Boys School and Upper Kober Elementary Girls School. The study sample consisted of (100) students split into two groups (experimental and control). The researcher adopting the Torrance test for creative thinking the verbal image "A" by examining the tests used in the Ristow study (1988), Edwards and Baldov (1987) study, and designing a teacher book for the (engineering and measurement) unit according to the integration between the strategies of the mantle of the expert and role playing.</p> <p>This study adopted quasi-experimental design. It included two groups (experimental and controlled) in two branches (males and females) for each group. The controlled group was taught by using the traditional method whereas the experimental group by the mantle of the expert. The data analyzed using (ANCOVA) test to measure the differences in the development of creative thinking between the control and experimental groups.</p> <p>The Conclusions showed that there are statistically significant differences in the mean scores of the creative thinking test due to the way, gender and interaction between them.</p> <p>Based on the Conclusions of the study, the researcher recommends the need to use the mantles of the expert in the teaching of mathematics.</p>


2019 ◽  
pp. 64-72
Author(s):  
G.G. Arunyants

The results of analysis of problems of regulation of gas supply complex of Kaliningrad region and main ways to increase its efficiency, as well as basic solutions for creation of a software complex Т-GAZ-2 automated calculation of natural gas tariffs for ACS of gas supply system subjects, geographically distributed and information connected to the regional automated information and control system (RAIS).


2020 ◽  
Vol 4 (1) ◽  
pp. 1-7
Author(s):  
Made Dirgantara ◽  
Karelius Karelius ◽  
Marselin Devi Ariyanti, Sry Ayu K. Tamba

Abstrak – Biomassa merupakan salah satu energi terbarukan yang sangat mudah ditemui, ramah lingkungan dan cukup ekonomis. Keberadaan biomassa dapat dimaanfaatkan sebagai pengganti bahan bakar fosil, baik itu minyak bumi, gas alam maupun batu bara. Analisi diperlukan sebagai dasar biomassa sebagai energi seperti proksimat dan kalor. Analisis terpenting untuk menilai biomassa sebagai bahan bakar adalah nilai kalori atau higher heating value (HHV). HHV secara eksperimen diukur menggunakan bomb calorimeter, namun pengukuran ini kurang efektif, karena memerlukan waktu serta biaya yang tinggi. Penelitian mengenai prediksi HHV berdasarkan analisis proksimat telah dilakukan sehingga dapat mempermudah dan menghemat biaya yang diperlukan peneliti. Dalam makalah ini dibahas evaluasi persamaan untuk memprediksi HHV berdasarkan analisis proksimat pada biomassa berdasarkan data dari penelitian sebelumnya. Prediksi nilai HHV menggunakan lima persamaan yang dievaluasi dengan 25 data proksimat biomassa dari penelitian sebelumnya, kemudian dibandingkan berdasarkan nilai error untuk mendapatkan prediksi terbaik. Hasil analisis menunjukan, persamaan A terbaik di 7 biomassa, B di 6 biomassa, C di 6 biomassa, D di 5 biomassa dan E di 1 biomassa.Kata kunci: bahan bakar, biomassa, higher heating value, nilai error, proksimat  Abstract – Biomass is a renewable energy that is very easy to find, environmentally friendly, and quite economical. The existence of biomass can be used as a substitute for fossil fuels, both oil, natural gas, and coal. Analyzes are needed as a basis for biomass as energy such as proximate and heat. The most critical analysis to assess biomass as fuel is the calorific value or higher heating value (HHV). HHV is experimentally measured using a bomb calorimeter, but this measurement is less effective because it requires time and high costs. Research on the prediction of HHV based on proximate analysis has been carried out so that it can simplify and save costs needed by researchers. In this paper, the evaluation of equations is discussed to predict HHV based on proximate analysis on biomass-based on data from previous studies. HHV prediction values using five equations were evaluated with 25 proximate biomass data from previous studies, then compared based on error value to get the best predictions. The analysis shows that Equation A predicts best in 7 biomass, B in 6 biomass, C in 6 biomass, D in 5 biomass, and E in 1 biomass. Key words: fuel, biomass, higher heating value, error value, proximate 


Foods ◽  
2021 ◽  
Vol 10 (3) ◽  
pp. 644
Author(s):  
Do-Yeong Kim ◽  
Boram Kim ◽  
Han-Seung Shin

The effect of cellulosic aerogel treatments used for adsorption of four polycyclic aromatic hydrocarbons (PAHs)—benzo[a]anthracene, chrysene, benzo[b]fluoranthene, and benzo[a]pyrene [BaP])—generated during the manufacture of sesame oil was evaluated. In this study, eulalia (Miscanthus sinensis var. purpurascens)-based cellulosic aerogel (adsorbent) was prepared and used high performance liquid chromatography with fluorescence detection for determination of PAHs in sesame oil. In addition, changes in the sesame oil quality parameters (acid value, peroxide value, color, and fatty acid composition) following cellulosic aerogel treatment were also evaluated. The four PAHs and their total levels decreased in sesame oil samples roasted under different conditions (p < 0.05) following treatment with cellulosic aerogel. In particular, highly carcinogenic BaP was not detected after treatment with cellulosic aerogel. Moreover, there were no noticeable quality changes in the quality parameters between treated and control samples. It was concluded that eulalia-based cellulosic aerogel proved suitable for the reduction of PAHs from sesame oil and can be used as an eco-friendly adsorbent.


Author(s):  
Bhargav Appasani ◽  
Amitkumar Vidyakant Jha ◽  
Sunil Kumar Mishra ◽  
Abu Nasar Ghazali

AbstractReal time monitoring and control of a modern power system has achieved significant development since the incorporation of the phasor measurement unit (PMU). Due to the time-synchronized capabilities, PMU has increased the situational awareness (SA) in a wide area measurement system (WAMS). Operator SA depends on the data pertaining to the real-time health of the grid. This is measured by PMUs and is accessible for data analytics at the data monitoring station referred to as the phasor data concentrator (PDC). Availability of the communication system and communication delay are two of the decisive factors governing the operator SA. This paper presents a pragmatic metric to assess the operator SA and ensure optimal locations for the placement of PMUs, PDC, and the underlying communication infrastructure to increase the efficacy of operator SA. The uses of digital elevation model (DEM) data of the surface topography to determine the optimal locations for the placement of the PMU, and the microwave technology for communicating synchrophasor data is another important contribution carried out in this paper. The practical power grid system of Bihar in India is considered as a case study, and extensive simulation results and analysis are presented for validating the proposed methodology.


Sign in / Sign up

Export Citation Format

Share Document