scholarly journals AN OVERVIEW OF THE COMPOSITE DESIGN OF SMART GRID DUE TO POWER DEMAND,PRODUCTION AND POWER DEFICIT IN NIGERIA

2021 ◽  
Vol 9 (4) ◽  
Author(s):  
O. C. Igwilo ◽  
O. Oodo ◽  
C. P. Nnabugwu ◽  
G. K. Ojikpong ◽  
P. O. Anyasi ◽  
...  

The general aim and objectives of the research is to demonstrate an overview of the composite design and emphasis of the implementation of an effective  and efficient smart grid power system that will address the challenges of epileptic power due to power demand, power production and power deficit in Nigeria.

2019 ◽  
Vol 2 (S1) ◽  
Author(s):  
Filip Pröstl Andrén ◽  
Thomas I. Strasser ◽  
Jürgen Resch ◽  
Bernhard Schuiki ◽  
Sebastian Schöndorfer ◽  
...  

Abstract The massive deployment of distributed generators from renewable sources in recent years has led to a fundamental paradigm change in terms of planning and operation of the electric power system. The usage of advanced automation and information and communication technology is a key element to handle these new challenges and to turn the traditional power system into a smart grid. The implementation of such complex systems solutions is associated with increasing development complexity resulting in increased engineering costs. The traditional engineering methods used for power system automation were not intended to be used for applications of this scale and complexity. However, the usage of proper methods, automation architectures, and corresponding tools holds huge optimization potential for the engineering process. Therefore, this work presents a model-based engineering and validation support system, covering the overall engineering process for smart grid applications.


2019 ◽  
Vol 2 (S1) ◽  
Author(s):  
Friederike Wenderoth ◽  
Elisabeth Drayer ◽  
Robert Schmoll ◽  
Michael Niedermeier ◽  
Martin Braun

Abstract Historically, the power distribution grid was a passive system with limited control capabilities. Due to its increasing digitalization, this paradigm has shifted: the passive architecture of the power system itself, which includes cables, lines, and transformers, is extended by a communication infrastructure to become an active distribution grid. This transformation to an active system results from control capabilities that combine the communication and the physical components of the grid. It aims at optimizing, securing, enhancing, or facilitating the power system operation. The combination of power system, communication, and control capabilities is also referred to as a “smart grid”. A multitude of different architectures exist to realize such integrated systems. They are often labeled with descriptive terms such as “distributed,” “decentralized,” “local,” or “central." However, the actual meaning of these terms varies considerably within the research community.This paper illustrates the conflicting uses of prominent classification terms for the description of smart grid architectures. One source of this inconsistency is that the development of such interconnected systems is not only in the hands of classic power engineering but requires input from neighboring research disciplines such as control theory and automation, information and telecommunication technology, and electronics. This impedes a clear classification of smart grid solutions. Furthermore, this paper proposes a set of well-defined operation architectures specialized for use in power systems. Based on these architectures, this paper defines clear classifiers for the assessment of smart grid solutions. This allows the structural classification and comparison between different smart grid solutions and promotes a mutual understanding between the research disciplines. This paper presents revised parts of Chapters 4.2 and 5.2 of the dissertation of Drayer (Resilient Operation of Distribution Grids with Distributed-Hierarchical Architecture. Energy Management and Power System Operation, vol. 6, 2018).


Sensors ◽  
2012 ◽  
Vol 12 (9) ◽  
pp. 11571-11591 ◽  
Author(s):  
Luis Hernández ◽  
Carlos Baladrón ◽  
Javier M. Aguiar ◽  
Lorena Calavia ◽  
Belén Carro ◽  
...  

2019 ◽  
Vol 91 (2) ◽  
pp. 353-365 ◽  
Author(s):  
Teresa Donateo ◽  
Roberto Totaro

Purpose The purpose of this paper is to analyze real-world flight data of a piston engine training aircraft collected from an internet-based radar service, along with wind data provided by a weather forecast model, and to use such data to design a hybrid electric power system. Design/methodology/approach The modeling strategy starts from the power demand imposed by a real-world wind-corrected flight profile, where speed and altitude are provided as functions of time, and goes through the calculation of the efficiency of the powertrain components when they meet such demand. Each component of the power system and, in particular, the engine and the propeller, is simulated as a black box with an efficiency depending on the actual working conditions. In the case of hybrid electric power system, the battery charging and discharging processes are simulated with the Shepherd model. Findings The variability of power demand and fuel consumption for a training aircraft is analyzed by applying the proposed methodology to the Piper PA-28-180 Cherokee, a very popular aircraft used for flight training, air taxi and personal use. The potentiality of hybridization is assessed by analyzing the usage of the engine over more than 90 flights. A tentative sizing of a hybrid electric power system is also proposed. It guarantees a fuel saving of about 5%. Originality/value The scientific contribution and the novelty of the investigation are related to the modeling methodology, which takes into account real-world flight conditions, and the application of hybridization to a training aircraft.


2021 ◽  
Vol 2083 (3) ◽  
pp. 032067
Author(s):  
Qiang Fu ◽  
Chengxi Fu ◽  
Peng Fu ◽  
Yuke Deng

Abstract Energy storage is one of the main problems bothering the power system. The present research situation of energy storage is outlined. The working principles, development process and technical features of pumped storage, compressed air energy storage, flywheel energy storage, electromagnetic energy storage and chemical energy storage are described in detail. The application prospect of energy storage is proposed.


Sign in / Sign up

Export Citation Format

Share Document