scholarly journals A Review on Minimum Quantity Lubrication (MQL) for Sustainable Machining Processes and its Application

2019 ◽  
Vol 9 (4) ◽  
pp. 785-792
Author(s):  
Rahul D Jadhav et al., Rahul D Jadhav et al., ◽  
Keyword(s):  
Minimum Quantity Lubrication ◽  
Machining Processes ◽  
Sustainable Machining ◽  
Minimum Quantity

Progress Toward Modeling and Optimization of Sustainable Machining Processes

2020 ◽  
Vol 142 (11) ◽  
Author(s):  
I. S. Jawahir ◽  
J. Schoop ◽  
Y. Kaynak ◽  
A. K. Balaji ◽  
R. Ghosh ◽  
...  
Keyword(s):  
Model Development ◽  
Minimum Quantity Lubrication ◽  
Practical Implementation ◽  
Machining Performance ◽  
Tool Selection ◽  
Machining Processes ◽  
Sustainable Machining ◽  
Modeling And Optimization ◽  
Minimum Quantity ◽  
Negative Environmental Impact

Abstract The topic of sustainable machining has in recent times emerged as a significant and impactful area of research focus as it directly deals with environmental health and protection, economic growth and prosperity, and societal wellbeing with greater health and wellness. More specifically, sustainable machining at product, process, and system levels deals with reducing negative environmental impact, offering improved energy and resource efficiency, generating a minimum quantity of wastes, providing operational safety, and offering improved personal health. This paper summarizes recent efforts by the world research community in sustainable machining with a systematic approach for the analysis of machining processes that are broadly classified as sustainable, beginning with dry machining, and then near-dry (also known as minimum quantity lubrication (MQL)) and cryogenic machining processes. The paper also extends its analysis to a hybrid mode of sustainable machining that effectively combines cryogenic and MQL machining processes for improved productivity and machining performance. While a significant part of this paper presents experimental analysis, the progress being made in modeling and optimization has also been discussed in the paper. In particular, major challenges involved in model development for practical implementation, with a view to selecting optimum cutting conditions and cutting tool selection, are primarily discussed in the paper. The need for continued modeling efforts for achieving deployable optimized conditions for sustainable machining is highly recognized, and further research is required in numerous fronts integrating the various convergent disciplines such as materials, mechanics, computational sciences, economics, environmental sciences.

Application of the auxiliary wheel cleaning jet in the plunge cylindrical grinding with Minimum Quantity Lubrication technique under various flow rates

2018 ◽  
Vol 233 (4) ◽  
pp. 1144-1156 ◽  
Author(s):  
Eduardo C Bianchi ◽  
Rafael L Rodriguez ◽  
Rodolfo A Hildebrandt ◽  
José C Lopes ◽  
Hamilton J de Mello ◽  
...  
Keyword(s):  
Environmental Sustainability ◽  
Substantial Reduction ◽  
Minimum Quantity Lubrication ◽  
Economic Benefits ◽  
Grinding Wheel ◽  
Machining Processes ◽  
Potential Health ◽  
Abrasive Wheel ◽  
Flow Rates ◽  
Minimum Quantity

Minimum Quantity Lubrication is an alternative technique to conventional techniques that are related to environmental sustainability and economic benefits. This technique promotes the substantial reduction of the amount of coolant employed in machining processes, representing a mitigation of risks to people’s health that are involved with the process. On the other hand, it has been reported in the literature that some problems of using the Minimum Quantity Lubrication technique can impair the grinding efficiency. One of these problems is associated with wheel clogging phenomenon, which is caused by inefficient chip removal from the cutting zone as well as from mixture of metal dust and oil accumulated on the wheel surface during grinding. If chips lodge inside the pores of the grinding wheel as machining progresses, they will adversely affect dimensional and geometric quality of final product. Also, this will require more frequent dressing. A solution for this problem can be an effective cleaning system of the abrasive wheel during grinding with the traditional Minimum Quantity Lubrication technique Assisted with Wheel Cleaning Jet. In this context and aiming to explore the various potential health, environmental and economic benefits that have been widely reported in the literature about the use of Minimum Quantity Lubrication technique in grinding, this study presents an application of the Minimum Quantity Lubrication technique at flow rates (30, 60 and 120 mL/h) and assisted with wheel cleaning jet (Minimum Quantity Lubrication + Assisted with Wheel Cleaning Jet) in plunge grinding of a hardened steel with an aluminum oxide wheel. Experiments were also carried out with traditional Minimum Quantity Lubrication (without wheel cleaning) and with the conventional coolant techniques for comparison. The output variables were geometrical errors (surface roughness and roundness) of the workpiece, diametric wheel wear, acoustic emission, vibration and tangential cutting force. Results showed that Minimum Quantity Lubrication + Assisted with Wheel Cleaning Jet (with wheel cleaning jet) not only outperformed the traditional Minimum Quantity Lubrication technique in all the parameters analyzed, but in some cases it proved to be compatible with the conventional coolant technique under the conditions investigated. Also, most of values of the output parameters tested decreased with increase in flow rate.

Experimental Investigation on Turning of Monel K500 Alloy Using Nano Graphene Cutting Fluid Under Minimum Quantity Lubrication

2019 ◽  
Author(s):  
Arul Kulandaivel ◽  
Senthil Kumar Santhanam
Keyword(s):  
Cutting Speed ◽  
Minimum Quantity Lubrication ◽  
High Strength ◽  
High Heat ◽  
Water Soluble ◽  
Cutting Fluid ◽  
Depth Of Cut ◽  
Machining Processes ◽  
Turning Operation ◽  
Minimum Quantity

Abstract Turning operation is one of the most commonly used machining processes. However, turning of high strength materials involves high heat generation which, in turn, results in undesirable characteristics such as increased tool wear, irregular chip formation, minor variations in physical properties etc. In order to overcome these, synthetic coolants are used and supplied in excess quantities (flood type). The handling and disposal of excess coolants are tedious and relatively expensive. In this proposed work, Water Soluble Cutting Oil suspended with nanoparticles (Graphene) is used in comparatively less quantities using Minimum quantity lubrication (MQL) method to improve the quality of machining. The testing was done on Turning operation of Monel K500 considering the various parameters such as the cutting speed, feed and depth of cut for obtaining a surface roughness of 0.462μm and cutting tool temperature of 55°C for MQL-GO (Graphene oxide) process.

scholarly journals Performance Assessment and Chip Morphology Evaluation of Austenitic Stainless Steel under Sustainable Machining Conditions

Metals ◽  
2021 ◽  
Vol 11 (12) ◽  
pp. 1931
Author(s):  
Anshuman Das ◽  
Smita Padhan ◽  
Sudhansu Ranjan Das ◽  
Mohammad S. Alsoufi ◽  
Ahmed Mohamed Mahmoud Ibrahim ◽  
...  
Keyword(s):  
Stainless Steel ◽  
Austenitic Stainless Steel ◽  
Performance Assessment ◽  
Sustainable Manufacturing ◽  
Minimum Quantity Lubrication ◽  
Chip Morphology ◽  
Compressed Air ◽  
Ceramic Tool ◽  
Sustainable Machining ◽  
Minimum Quantity

Sustainable manufacturing has received great attention in the last few decades for obtaining high quality products with minimal costs and minimal negative impacts on environment. Sustainable machining is one of the main sustainable manufacturing branches, which is concerned with improving environmental conditions, reducing power consumption, and minimizing machining costs. In the current study, the performance of three sustainable machining techniques, namely dry, compressed air cooling, and minimum quantity lubrication, is compared with conventional flood machining during the turning of austenitic stainless steel (Nitronic 60). This alloy is widely used in aerospace engine components, medical applications, gas power industries, and nuclear power systems due to its superior mechanical and thermal properties. Machining was performed using SiAlON ceramic tool with four different cutting speeds, feeds and a constant depth of cut. Consequently, various chip characteristics such as chip morphology, chip thickness, saw tooth distance and chip segmentation frequency were analyzed with both optical and scanning electron microscopes. Performance assessment was performed under the investigated cutting conditions. Our results show that the tool life under MQL machining are 138%, 72%, and 11% greater than dry, compressed air, and flooded conditions, respectively. The use of SiAlON ceramic tool results is more economically viable under the MQL environment as the overall machining cost per component is lower ($0.27) as compared to dry ($0.36), compressed air ($0.31), and flooded ($0.29) machining conditions. The minimum quantity lubrication technique outperformed the other investigated techniques in terms of eco-friendly aspects, economic feasibility, and technical viability to improve sustainability.

Sign in / Sign up

Export Citation Format

Share Document