scholarly journals Analytical Spectrometric Study For Determining Dapagliflozin Propanediol Monohydrate Individually Or In Presence Of Metformin Hydrochloride In Tablets Formulation

2020 ◽  
Vol 17 ◽  
pp. 80-87
Author(s):  
SAAD ANTAKLI ◽  
Raghad Kabbani ◽  
And Rama Labban

First simple spectrophotometric method was developed and applied to determine Dapagliflozin Propanediol  Monohydrate by Zero Spectrophotometry and First Derivative Spectrophotometric method for determining of Dapagliflozin Propanediol Monohydrate (DAPA) in the presence of Metformin Hydrochloride (MET). Zero spectrophotometric (ZS) was applied for the determination of (DAPA) at 223.5 nm. Linearity range was (2.61– 31.23) µg/mL. Regression analysis showed a good correlation coefficients R2 = 0.9989. The limit of detection (LOD) and limit of quantification (LOQ) were to be 0.569 µg/mL and 1.724 µg/mL, respectively. Derivative spectrophotometric (1DS) was applied for the determination of (DAPA) in the presence (MET). (DAPA) was determined at 233 nm (1D233).  Linearity ranges were (5.21 – 41.64) µg/mL for (DAPA). Regression analysis showed a good correlation coefficients R2 = 0.9994. The limit of detection (LOD) and limit of quantification (LOQ) were to be 0.732 µg/mL and 2.218 µg/mL for (DAPA). The proposed Zero spectrophotometry method was applied to analysis individual (DAPA), and the derivative (1D233) method was applied to analysis (DAPA) individually or with (MET) combination in Syrian trademark drugs.

2021 ◽  
Vol 18 ◽  
pp. 40-48
Author(s):  
Saad Antakli ◽  
Leon Nejem ◽  
Monzer Alraii

Simple and rapid spectrophotometric method was developed and applied to determine Glibenclamide (GB) by zero spectrophotometric method and first derivative spectrophotometric method for determining of (GB) in the presence of Metformin hydrochloride (MET). Zero spectrophotometric (ZS) method was applied for the determination of (GB) at λmax = 300 nm. Linearity range was (4 – 360) μg/mL. Regression analysis showed a good correlation coefficients R2 = 0.99993. The limit of detection (LOD) and limit of quantification (LOQ) were to be 0.65 μg/mL and 2.31 μg/mL, respectively.  First derivative spectrophotometric (1DS) method was applied for the determination of (GB) in the presence (MET). (GB) was determined at 317 nm (1D317). Linearity ranges were (4 – 240) μg/mL for (GB). Regression analysis showed a good correlation coefficients R2 = 0.999914. The limit of detection (LOD) and limit of quantification (LOQ) were to be 0.60 μg/mL and 1.83 μg/mL for (GB). The proposed zero spectrophotometry method was applied to analysis individual (GB), and the derivative (1D317) method was applied to analysis (GB) individually or combined with (MET) in Syrian trademark drugs. The proposed method is simple, direct, sensitive and do not require any extraction process. Thus, this method could be readily applicable for the quality control and routine analysis.


2007 ◽  
Vol 72 (8-9) ◽  
pp. 809-819 ◽  
Author(s):  
Biljana Abramovic ◽  
Vesna Anderluh ◽  
Ferenc Gaál ◽  
Daniela Sojic

A derivative spectrophotometric method for the determination of the herbicides picloram (4-amino-3,5,6-trichloropicolinic acid) and triclopyr (3,5,6-trichloro- 2-pyridyloxyacetic acid) in mixtures was developed in this work. Derivative spectrophotometric determination of the selected herbicides was preceded by investigations concerning the influence of pH, in the pH interval from 1 to 9. At pH 3.2, picloram and triclopyr solutions are stable under daylight for nine months. This pH was used for all subsequent determinations. It was also found that the use of the first derivative of the spectra at 232 nm was optimal for the determination of picloram, while use of the second derivative of the spectra at 211 nm was best suited for the determination of triclopyr. The calibration curves are linear in the concentration range 0.8 - 13 ?g cm-3 with correlation coefficients -0.9998 for picloram and 0.9996 for triclopyr. The limit of detection of the developed method is 0.08 ?g cm-3 for picloram and 0.03 ?g cm-3 for triclopyr. Derivative spectrophotometry was shown to be an appropriate method for the determination of picloram and triclopyr in mixtures and in pesticide formulations, unlike the deconvolution method. .


2015 ◽  
Vol 18 (2) ◽  
pp. 163-168 ◽  
Author(s):  
Sujan Banik ◽  
Palash Karmakar ◽  
Md Anowar Hossain Miah

The present study was undertaken to develop a spectrophotometric method for determination of vildagliptin and Linagliptin in pharmaceutical dosage forms. This paper describes a simple, rapid, accurate and precise UVspectrophotometric method for the assay of vildagliptin and linagliptin in bulk and marketed tablet dosage forms. The validation of the developed method was carried out according to ICH guidelines with respect to linearity, precision, accuracy, specificity, limit of detection and limit of quantification. Calibration curves were obtained in the concentration range of 8-32 ?g/ml for vildagliptin and 5-25 ?g/ml for linagliptin with good correlation coefficients (r=0.999). The precisions of the new method for both drugs were less than the maximum allowable limit (%RSD < 2.0) specified by the USP, ICH and FDA. Therefore, the method was found to be an accurate, reproducible and sensitive for analysis of vildagliptin and linagliptin in pharmaceutical dosage forms.Bangladesh Pharmaceutical Journal 18(2): 163-168, 2015


INDIAN DRUGS ◽  
2020 ◽  
Vol 57 (05) ◽  
pp. 56-64
Author(s):  
Rani A Prameela ◽  
S. Madhavi ◽  
Rao B. Tirumaleswara ◽  
Sudheer Reddy CH.

A novel Ultra Performance Liquid Chromatography (UPLC) method was developed and validated for the simultaneous determination of antidiabetic drugs metformin hydrochloride and nateglinide. The method was developed using a Waters ACQUITY UPLC SB C18 (100 × 2.1 mm, 1.8 μm) column. The mobile phase consisting of 0.01 % potassium dihydrogen phosphate buffer (pH 5.8): acetonitrile (50: 50 V/V) was used throughout the analysis. The flow rate was 0.3 mL/min, the injection volume was 1.0 μL, column temperature was 30 0C, run time 3 min and detection was carried at 238 nm using a TUV detector. The retention times of metformin hydrochloride and nateglinide were found to be 1.28 1.71 min, respectively. Metformin hydrochloride and nateglinide were found to be linear over the concentration range of 125-750 and 15-90 μg/mL. The limit of detection and the limit of quantification for metformin hydrochloride were found to be 0.22 and 0.68 μg/mL, respectively, and, for nateglinide, 0.02 and 0.6 μg/mL, respectively. Developed method was validated as per ICH guidelines. The specificity of the method was confirmed by forced degradation study. The suggested method is suitable for determination of metformin hydrochloride and nateglinide in bulk and pharmaceutical dosage forms.


2017 ◽  
Vol 9 (5) ◽  
pp. 102
Author(s):  
Sukhjinder Kaur ◽  
Taranjit Kaur ◽  
Gurdeep Kaur ◽  
Shivani Verma

Objective: The aim of the present work was to develop a simple, rapid, accurate and economical UV-visible spectrophotometric method for the determination of hydroquinone (HQ) in its pure form, marketed formulation as well as in the prepared nanostructured lipid carrier (NLC) systems and to validate the developed method.Methods: HQ was estimated at UV maxima of 289.6 nm in pH 5.5 phosphate buffer using UV-Visible double beam spectrophotometer. Following the guidelines of the International Conference on Harmonization (ICH), the method was validated for various analytical parameters like linearity, precision, and accuracy robustness, ruggedness, limit of detection, quantification limit, and formulation analysis.Results: The obtained results of the analysis were validated statistically. Recovery studies were performed to confirm the accuracy of the proposed method. In the developed method, linearity over the concentration range of 5-40 μg/ml of HQ was observed with the correlation coefficient of 0.998 and found in good agreement with Beer Lambert’s law. The precision (intra-day and inter-day) of the method was found within official RCD limits (RSD<2%).Conclusion: The sensitivity of the method was assessed by determining the limit of detection and limit of quantification. It could be concluded from the results obtained that the purposed method for estimation of HQ in pure form, in the marketed ointment and in the prepared NLC-formulation was simple, rapid, accurate, precise and economical. It can be used successfully in the quality control of pharmaceutical formulations and for the routine laboratory analysis.


2015 ◽  
Vol 12 (1) ◽  
pp. 167-177 ◽  
Author(s):  
Baghdad Science Journal

A spectrophotometric method has been proposed for the determination of two drugs containing phenol group [phenylephrine hydrochloride (PHP) and salbutamol sulphate (SLB)] in pharmaceutical dosage forms. The method is based on the diazotization reaction of metoclopramide hydrochloride (MCP) and coupling of the diazotized reagent with drugs in alkaline medium to give intense orange colored product (?max at 470 nm for each of PHP and SLB). Variable parameters such as temperature, reaction time and concentration of the reactants have been analyzed and optimized. Under the proposed optimum condition, Beer’s law was obeyed in the concentration range of 1-32 and 1-14 ?g mL-1 for PHP and SLB, respectively. The limit of detection (LOD) and limit of quantification (LOQ) for each of PHP and SLB were 0.60, 0.52 ?g mL-1 and 2.02, 1.72 ?g mL-1, respectively. No interference was observed from common excipients present in pharmaceutical preparations. The good correlation coefficients and low relative standard deviation assert the applicability of this method. The suggested method was further applied for the determinations of drugs in commercial pharmaceutical preparations, which was compared statistically with reference methods by means of t- test and F- test and were found not to differ significantly at 95% confidence level. The procedure was characterized by its simplicity with accuracy and precision.


2008 ◽  
Vol 33 (3) ◽  
pp. 7-12 ◽  
Author(s):  
M. A. Gotardo ◽  
L. S. Lima ◽  
R. Sequinel ◽  
J. L. Rufino ◽  
L. Pezza ◽  
...  

A simple, rapid and sensitive spectrophotometric method has been developed for the determination of methyldopa in pharmaceutical formulations. The method is based on the reaction between tetrachloro-p-benzoquinone (p-chloranil) and methyldopa, accelerated by hydrogen peroxide (H2O2), producing a violet-red compound (λmax = 535 nm) at ambient temperature (25.0 ± 0.2 ºC). Experimental design methodologies were used to optimize the measurement conditions. Beer's law is obeyed in a concentration range from 2.10 x 10-4 to 2.48 x 10-3 mol L-1 (r = 0.9997). The limit of detection was 7.55 x 10-6 mol L-1 and the limit of quantification was 2.52 x 10-5 mol L-1. The intraday precision and interday precision were studied for 10 replicate analyses of 1.59 x 10-3 mol L-1 methyldopa solution and the respective coefficients of variation were 0.7 and 1.1 %. The proposed method was successfully applied to the determination of methyldopa in commercial brands of pharmaceuticals. No interferences were observed from the common excipients in the formulations. The results obtained by the proposed method were favorably compared with those given by the Brazilian Pharmacopoeia procedure at 95 % confidence level.


2013 ◽  
Vol 2013 ◽  
pp. 1-5
Author(s):  
Neelkant Prasad ◽  
Roshan Issarani ◽  
Badri Prakash Nagori

A simple and sensitive ultraviolet spectrophotometric method for quantitative estimation of glipizide in presence of lipid turbidity is described to avoid false estimation due to diffraction by turbidity. UV detection was performed at 230 nm, 225 nm, and 235 nm, and the calibration curve was plotted between resultant of absorbance of [230 nm − (225 nm + 235 nm)/2] and concentration of analyte. The calibration curve was linear over the concentration range tested (1–20 μg/mL) with limit of detection of 0.27 μg/mL and limit of quantification of 0.82 μg/mL. Percent relative standard deviations and percent relative mean error, representing precision and accuracy, respectively, for clear as well as turbid solutions, were found to be within acceptable limits, that is, always less than 0.69 and 0.41, respectively, for clear solution and 0.65 and 0.47, respectively, for turbid solution. Conclusively, our method was successfully applied for the determination of glipizide in clear as well as turbid solutions, and it was found that the drug analyte in both types of solutions can be detected from the same calibration curve accurately and precisely and glipizide entrapped in the liposomes or in proliposomal matrix was not detected.


Author(s):  
Ayya Rajendra Prasad ◽  
Jayanthi Vijaya Ratna

 Objective: The objective of this study was developed and validated a novel, specific, precise, and simple ultraviolet (UV)-spectrophotometric method for the estimation of norfloxacin present in taste masked drug-resin complex.Methods: UV-spectrophotometric determination was performed with ELICO SL 1500 UV-visible spectrophotometer using 0.1 N HCl as a medium. The spectrum of the standard solution was run from 200 to 400 nm range for the determination of absorption maximum (λ max). λ max of norfloxacin was found at 278 nm. The absorbance of standard solutions of 1, 2, 3, 4, and 5 μg/ml of drug solution was measured at an absorption maximum at 278 nm against the blank. Then, a graph was plotted by taking concentration on X-axis and absorbance on Y-axis which gave a straight line. Validation parameters such as linearity and range, selectivity and specificity, limit of detection (LOD) and limit of quantification (LOQ), accuracy, precision, and robustness were evaluated as per the International Conference on Harmonization (ICH) guidelines.Results: Linearity for the UV-spectrophotometric method was noted over a concentration range of 1–5 μg/ml with a correlation coefficient of 0.9995. The LOD and LOQ for norfloxacin were found at 0.39 μg/ml and 1.19 μg/ml, respectively. Accuracy was in between 99.00% and 99.17%. % relative standard deviation for repeatability, intraday precision, and interday precision was found to be 0.600, in between 0.291 and 0.410, and in between 0.682 and 1.439, respectively. The proposed UV spectrophotometric method is found to be robust.Conclusion: The proposed UV-spectrophotometric method was validated according to the ICH guidelines, and results and statistical parameters demonstrated that the developed method is sensitive, precise, reliable, and simple for the estimation of norfloxacin present in taste masked drug-resin complex.


2017 ◽  
Vol 16 (1) ◽  
pp. 37-42
Author(s):  
Lyudmyla M Antypenko ◽  
Vitaliy A Solodovnyk

A simple and low-cost UV-spectrophotometric method has been developed and validated for the quantification of Octopirox in bulk. The linearity was found at 307 ± 1 nm in 10-50 ?g/ml solution of ethanol-water (1:3, v:v) with r2 = 0.99. The limit of detection was found to be 1.18 µg/ml, while the limit of quantification was 3.58 µg/ml. The method was validated for linearity, accuracy, precision, range, ruggedness and robustness.Dhaka Univ. J. Pharm. Sci. 16(1): 37-42, 2017 (June)


Sign in / Sign up

Export Citation Format

Share Document