scholarly journals Effect of Grafted CNT on Carbon Fibers on Impregnation Properties of Carbon Fiber Reinforced Polyamide 6

2021 ◽  
Vol 70 (9) ◽  
pp. 670-677
Author(s):  
Kazuto TANAKA ◽  
Toshiki TAKENAKA ◽  
Tsutao KATAYAMA ◽  
Yusuke MORITA
Keyword(s):  
Carbon Fiber ◽  
Carbon Fibers ◽  
Polyamide 6 ◽  
Fiber Reinforced ◽  
Carbon Fiber Reinforced

Mechanical behavior of unidirectional carbon fiber-reinforced polyamide 6 composites under transverse tension and the structure of polyamide 6 among carbon fibers

2020 ◽  
Vol 52 (10) ◽  
pp. 1195-1201 ◽  
Author(s):  
Hideyuki Uematsu ◽  
Daisuke Kurita ◽  
Shota Nakakubo ◽  
Ayaka Yamaguchi ◽  
Masachika Yamane ◽  
...  
Keyword(s):  
Carbon Fiber ◽  
Mechanical Behavior ◽  
Carbon Fibers ◽  
Polyamide 6 ◽  
Fiber Reinforced ◽  
Transverse Tension ◽  
Carbon Fiber Reinforced

Graphene oxide modified carbon fiber reinforced epoxy composites

2020 ◽  
Vol 40 (5) ◽  
pp. 415-420 ◽  
Author(s):  
Yasin Altin ◽  
Hazal Yilmaz ◽  
Omer Faruk Unsal ◽  
Ayse Celik Bedeloglu
Keyword(s):  
Graphene Oxide ◽  
Carbon Fiber ◽  
Carbon Fibers ◽  
Spray Coating ◽  
Sem Analysis ◽  
Epoxy Composites ◽  
Matrix Composites ◽  
Fiber Reinforced ◽  
Quick Method ◽  
Carbon Fiber Reinforced

AbstractThe interfacial interaction between the fiber and matrix is the most important factor which influences the performance of the carbon fiber-epoxy composites. In this study, the graphitic surface of the carbon fibers was modified with graphene oxide nanomaterials by using a spray coating technique which is an easy, cheap, and quick method. The carbon fiber-reinforced epoxy matrix composites were prepared by hand layup technique using neat carbon fibers and 0.5, 1 and 2% by weight graphene oxide (GO) modified carbon fibers. As a result of SEM analysis, it was observed that GO particles were homogeneously coated on the surface of the carbon fibers. Furthermore, Young's modulus increased from 35.14 to 43.40 GPa, tensile strength increased from 436 to 672 MPa, and the elongation at break was maintained around 2% even in only 2% GO addition.

scholarly journals Thermo-mechanical behavior of epoxy composite reinforced by carbon and Kevlar fiber

2018 ◽  
Vol 225 ◽  
pp. 01022
Author(s):  
Falak O. Abasi ◽  
Raghad U. Aabass
Keyword(s):  
Mechanical Properties ◽  
Carbon Fiber ◽  
Flexural Strength ◽  
Carbon Fibers ◽  
Epoxy Composites ◽  
Fiber Reinforced ◽  
Fiber Loading ◽  
Kevlar Fiber ◽  
Carbon Fiber Reinforced ◽  
Short Carbon

Newer manufacturing techniques were invented and introduced during the last few decades; some of them were increasingly popular due to their enhanced advantages and ease of manufacturing over the conventional processes. Polymer composite material such as glass, carbon and Kevlar fiber reinforced composite are popular in high performance and light weight applications such as aerospace and automobile fields. This research has been done by reinforcing the matrix (epoxy) resin with two kinds of the reinforcement fibers. One weight fractions were used (20%) wt., Epoxy reinforced with chopped carbon fiber and second reinforcement was epoxy reinforced with hybrid reinforcements Kevlar fiber and improved one was the three laminates Kevlar fiber and chopped carbon fibers reinforced epoxy resin. After preparation of composite materials some of the mechanical properties have been studied. Four different fiber loading, i.e., 0 wt. %, 20wt. % CCF, 20wt. % SKF, AND 20wt. %CCF + 20wt. % SKF were taken for evaluating the above said properties. The thermal and mechanical properties, i.e., hardness load, impact strength, flexural strength (bending load), and thermal conductivity are determined to represent the behaviour of composite structures with that of fibers loading. The results show that with the increase in fiber loading the mechanical properties of carbon fiber reinforced epoxy composites increases as compared to short carbon fiber reinforced epoxy composites except in case of hardness, short carbon fiber reinforced composites shows better results. Similarly, flexural strength test, Impact test, and Brinell hardness test the results show the flexural strength, impact strength of the hybrid composites values were increased with existence of Kevlar fibers, while the hardness was decrease. But the reinforcement with carbon fibers increases the hardness and decreases other tests.

Improvement of the electrical conductivity of carbon fiber reinforced polymer by incorporation of nanofillers and the resulting thermal and mechanical behavior

2017 ◽  
Vol 52 (11) ◽  
pp. 1495-1503 ◽  
Author(s):  
K Hamdi ◽  
Z Aboura ◽  
W Harizi ◽  
K Khellil
Keyword(s):  
Electrical Conductivity ◽  
Carbon Fiber ◽  
Carbon Black ◽  
Electrical Current ◽  
Polyamide 6 ◽  
Fiber Reinforced Polymer ◽  
Carbon Fiber Reinforced Polymer ◽  
Fiber Reinforced ◽  
Reinforced Polymer ◽  
Carbon Fiber Reinforced

This work tends to characterize the effect of carbon black nanofillers on the properties of the woven carbon fiber reinforced thermoplastic polymers. First of all, composites from nanofilled Polyamide 6 resin reinforced by carbon fibers were fabricated. Scanning electron microscopy observations were performed to localize the nanoparticles and showed that particles penetrated the fiber zone. In fact, by reaching this zone, the carbon black nanofillers create a connectivity's network between fibers, which produces an easy pathway for the electrical current. It explains the noticed improvement of the electrical conductivity of the carbon black nanofilled composites. Electrical conductivity of neat matrix composite passed from 20 to 80 S/cm by adding 8 wt% of carbon black and to 140 S/cm by adding 16 wt% of the same nanofiller. The addition of nanofillers modifies the heating and cooling laws of carbon fiber reinforced polymer: the nanofilled carbon fiber reinforced polymer with 16 wt% is the most conductive so it heats less. Based on these results, the use of the composite itself as an indicator of this mechanical state might be possible. In fact, the study of the influence of a mechanical loading on the electrical properties of the composite by recording the variance of an electrical set is possible.

Effect of matrix crystallinity of carbon fiber reinforced polyamide 6 on static bending properties

2020 ◽  
pp. 1-14
Author(s):  
Takenobu Sakai ◽  
Nur Safiah Binti Shamsudim ◽  
Ryota Fukushima ◽  
Kensuke Kageyama
Keyword(s):  
Carbon Fiber ◽  
Polyamide 6 ◽  
Fiber Reinforced ◽  
Bending Properties ◽  
Carbon Fiber Reinforced

scholarly journals Experimental investigation of the microstructures and tensile properties of polyacrylonitrile-based carbon fibers exposed to elevated temperatures in air

2019 ◽  
Vol 14 ◽  
pp. 155892501985001 ◽  
Author(s):  
Chenggao Li ◽  
Guijun Xian
Keyword(s):  
Tensile Strength ◽  
Carbon Fiber ◽  
Carbon Fibers ◽  
Elevated Temperatures ◽  
Tensile Modulus ◽  
Fiber Reinforced Polymer ◽  
Carbon Fiber Reinforced Polymer ◽  
Fiber Reinforced ◽  
Reinforced Polymer ◽  
Carbon Fiber Reinforced

The elevated temperature resistance and even fire resistance of carbon fiber-reinforced polymer composites were critical concerns in many applications. These properties of a carbon fiber-reinforced polymer depend not only on the degradation of the polymer matrix but also on that of the carbon fibers under elevated temperatures. In this study, influences of elevated temperatures (by 700°C for 30 min) in air on the mechanical properties and microstructures of a carbon fiber were investigated experimentally. It was found that the tensile strength and modulus as well as the diameters of the carbon fibers were reduced remarkably when the treatment temperatures exceeded 500°C. At the same time, the content of the structurally ordered carbonaceous components on the surface of carbon fibers and the graphite microcrystal size were reduced, while the graphite interlayer spacing ( d002) was enhanced. The deteriorated tensile modulus was attributed to the reduced graphite microcrystal size and the reduced thickness of the skin layer of the carbon fiber, while the degraded tensile strength was mainly attributed to the weakened cross-linking between the graphite planes.

scholarly journals Orthogonal Experimental Analysis and Mechanism Study on Electrochemical Catalytic Treatment of Carbon Fiber-Reinforced Plastics Assisted by Phosphotungstic Acid

Polymers ◽  
2020 ◽  
Vol 12 (9) ◽  
pp. 1866
Author(s):  
Chun Pei ◽  
Peiheng Guo ◽  
Ji-Hua Zhu
Keyword(s):  
Carbon Fiber ◽  
Epoxy Resin ◽  
Carbon Fibers ◽  
Phosphotungstic Acid ◽  
Degradation Mechanism ◽  
Fiber Reinforced ◽  
Carbon Fiber Reinforced Plastics ◽  
Reinforced Plastics ◽  
Fiber Reinforced Plastics ◽  
Carbon Fiber Reinforced

Preserving the integrity of carbon fibers when recycling carbon-fiber-reinforced plastics (CFRPs) has been unfeasible due to the harsh reaction conditions required to remove epoxy resin matrixes, which adversely affect the properties of carbon fibers. We establish a practicable and environmentally friendly reclamation strategy for carbon fibers. Carbon fibers are recycled from waste CFRPs by an electrochemical catalytic reaction with the assistance of phosphotungstic acid (PA), which promotes the depolymerization of diglycidyl ether of bisphenol A/ethylenediamine (DGEBA/EDA) epoxy resin. The removal rate, mechanical strength, and microstructure of the recycled carbon fibers are analyzed to explore the mechanism of the electrochemical treatment. The influence of three factors—current density, PA concentration, and reaction time—are studied via an orthogonal method. Range analysis and variance analysis are conducted to investigate the significance of the factors. The optimal conditions are determined accordingly. The underlying CFRP degradation mechanism is also investigated.

Sign in / Sign up

Export Citation Format

Share Document