Projections of measures with small supports

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Bilel Selmi
Keyword(s):  
Hausdorff Dimension

Abstract In this paper, we use a characterization of the mutual multifractal Hausdorff dimension in terms of auxiliary measures to investigate the projections of measures with small supports.

scholarly journals Topological flows for hyperbolic groups

2020 ◽  
pp. 1-47
Author(s):  
RYOKICHI TANAKA
Keyword(s):  
Hausdorff Dimension ◽  
Radon Measure ◽  
Hyperbolic Group ◽  
Hyperbolic Metric ◽  
Hyperbolic Groups ◽  
Group Invariant ◽  
Hyperbolic Metrics ◽  
Measure Class

Abstract Weshow that for every non-elementary hyperbolic group the Bowen–Margulis current associated with a strongly hyperbolic metric forms a unique group-invariant Radon measure class of maximal Hausdorff dimension on the boundary square. Applications include a characterization of roughly similar hyperbolic metrics via mean distortion.

scholarly journals Characterization of Low Dimensional RCD*(K, N) Spaces

2016 ◽  
Vol 4 (1) ◽  
Author(s):  
Yu Kitabeppu ◽  
Sajjad Lakzian
Keyword(s):  
Hausdorff Dimension ◽  
Isoperimetric Inequality ◽  
Type Inequality ◽  
Metric Measure Spaces ◽  
One Dimensional ◽  
Curvature Bounds ◽  
Measure Spaces ◽  
Low Dimensional ◽  
Regular Sets

AbstractIn this paper,we give the characterization of metric measure spaces that satisfy synthetic lower Riemannian Ricci curvature bounds (so called RCD*(K, N) spaces) with non-empty one dimensional regular sets. In particular, we prove that the class of Ricci limit spaces with Ric ≥ K and Hausdorff dimension N and the class of RCD*(K, N) spaces coincide for N < 2 (They can be either complete intervals or circles). We will also prove a Bishop-Gromov type inequality (that is ,roughly speaking, a converse to the Lévy-Gromov’s isoperimetric inequality and was previously only known for Ricci limit spaces) which might be also of independent interest.

BIRKHOFF SPECTRA FOR ONE-DIMENSIONAL MAPS WITH SOME HYPERBOLICITY

2010 ◽  
Vol 10 (01) ◽  
pp. 53-75 ◽  
Author(s):  
YONG MOO CHUNG
Keyword(s):  
Dynamical System ◽  
Hausdorff Dimension ◽  
Multifractal Analysis ◽  
Probability Measures ◽  
One Dimensional ◽  
System A ◽  
Topologically Mixing ◽  
One Dimensional Maps ◽  
Dimension One

We study the multifractal analysis for smooth dynamical systems in dimension one. It is given a characterization of the Hausdorff dimension of the level set obtained from the Birkhoff averages of a continuous function by the local dimensions of hyperbolic measures for a topologically mixing C2 map modeled by an abstract dynamical system. A characterization which corresponds to above is also given for the ergodic basins of invariant probability measures. And it is shown that the complement of the set of quasi-regular points carries full Hausdorff dimension.

Besov Spaces and Hausdorff Dimension For Some Carnot-Carathéodory Metric Spaces

2002 ◽  
Vol 54 (6) ◽  
pp. 1280-1304 ◽  
Author(s):  
Leszek Skrzypczak
Keyword(s):  
Hausdorff Dimension ◽  
Besov Spaces ◽  
Vector Fields ◽  
Atomic Decomposition ◽  
Metric Spaces ◽  
Invariant Vector ◽  
Hörmander Condition ◽  
Carathéodory Metric ◽  
Left Invariant Vector

AbstractWe regard a system of left invariant vector fields satisfying the Hörmander condition and the related Carnot-Carathéodory metric on a unimodular Lie group G. We define Besov spaces corresponding to the sub-Laplacian both with positive and negative smoothness. The atomic decomposition of the spaces is given. In consequence we get the distributional characterization of the Hausdorff dimension of Borel subsets with the Haar measure zero.

Morphological Characterization of Mycobacteriophage R1

1974 ◽  
Vol 32 ◽  
pp. 254-255
Author(s):  
B. L. Soloff ◽  
T. A. Rado
Keyword(s):  
Carbon Source ◽  
Stationary Phase ◽  
Growth Phase ◽  
Minimal Medium ◽  
Morphological Characterization ◽  
Logarithmic Growth Phase ◽  
Complete Lysis ◽  
Lysogenic Culture ◽  
Logarithmic Growth

Mycobacteriophage R1 was originally isolated from a lysogenic culture of M. butyricum. The virus was propagated on a leucine-requiring derivative of M. smegmatis, 607 leu−, isolated by nitrosoguanidine mutagenesis of typestrain ATCC 607. Growth was accomplished in a minimal medium containing glycerol and glucose as carbon source and enriched by the addition of 80 μg/ ml L-leucine. Bacteria in early logarithmic growth phase were infected with virus at a multiplicity of 5, and incubated with aeration for 8 hours. The partially lysed suspension was diluted 1:10 in growth medium and incubated for a further 8 hours. This permitted stationary phase cells to re-enter logarithmic growth and resulted in complete lysis of the culture.

AEM analysis of crystallization in Ti-based amorphous alloys

1983 ◽  
Vol 41 ◽  
pp. 270-271
Author(s):  
A.R. Pelton ◽  
A.F. Marshall ◽  
Y.S. Lee
Keyword(s):  
Magnetic Properties ◽  
Amorphous Alloys ◽  
Amorphous Materials ◽  
Isothermal Annealing ◽  
Amorphous Matrix ◽  
Nucleation And Growth ◽  
Current Interest ◽  
Amorphous Films ◽  
Electrical And Magnetic Properties

Amorphous materials are of current interest due to their desirable mechanical, electrical and magnetic properties. Furthermore, crystallizing amorphous alloys provides an avenue for discerning sequential and competitive phases thus allowing access to otherwise inaccessible crystalline structures. Previous studies have shown the benefits of using AEM to determine crystal structures and compositions of partially crystallized alloys. The present paper will discuss the AEM characterization of crystallized Cu-Ti and Ni-Ti amorphous films.Cu60Ti40: The amorphous alloy Cu60Ti40, when continuously heated, forms a simple intermediate, macrocrystalline phase which then transforms to the ordered, equilibrium Cu3Ti2 phase. However, contrary to what one would expect from kinetic considerations, isothermal annealing below the isochronal crystallization temperature results in direct nucleation and growth of Cu3Ti2 from the amorphous matrix.

Characterization of Coherent, Ordered Precipitates in Nickel-Base Alloys

1973 ◽  
Vol 31 ◽  
pp. 144-145
Author(s):  
B. H. Kear ◽  
J. M. Oblak
Keyword(s):  
Stable Phase ◽  
Nickel Base Superalloy ◽  
Alloy 718 ◽  
Commercial Alloy ◽  
Precipitate Morphology ◽  
Continuous Precipitation ◽  
Nickel Base ◽  
Base Superalloy ◽  
Strengthening Precipitate

A nickel-base superalloy is essentially a Ni/Cr solid solution hardened by additions of Al (Ti, Nb, etc.) to precipitate a coherent, ordered phase. In most commercial alloy systems, e.g. B-1900, IN-100 and Mar-M200, the stable precipitate is Ni3 (Al,Ti) γ′, with an LI2structure. In A lloy 901 the normal precipitate is metastable Nis Ti3 γ′ ; the stable phase is a hexagonal Do2 4 structure. In Alloy 718 the strengthening precipitate is metastable γ″, which has a body-centered tetragonal D022 structure.Precipitate MorphologyIn most systems the ordered γ′ phase forms by a continuous precipitation re-action, which gives rise to a uniform intragranular dispersion of precipitate particles. For zero γ/γ′ misfit, the γ′ precipitates assume a spheroidal.

The Use of Advanced Analytical Techniques for Characterization of the Chemical, Physical, and Crystallographic Nature of a Surface

1973 ◽  
Vol 31 ◽  
pp. 132-133 ◽  
Author(s):  
R. E. Herfert
Keyword(s):  
Surface Characterization ◽  
Analytical Techniques ◽  
X Ray Diffraction ◽  
Depth Of Penetration ◽  
X Ray ◽  
The Past ◽  
Transmission Electron ◽  
Scanning Electron

Studies of the nature of a surface, either metallic or nonmetallic, in the past, have been limited to the instrumentation available for these measurements. In the past, optical microscopy, replica transmission electron microscopy, electron or X-ray diffraction and optical or X-ray spectroscopy have provided the means of surface characterization. Actually, some of these techniques are not purely surface; the depth of penetration may be a few thousands of an inch. Within the last five years, instrumentation has been made available which now makes it practical for use to study the outer few 100A of layers and characterize it completely from a chemical, physical, and crystallographic standpoint. The scanning electron microscope (SEM) provides a means of viewing the surface of a material in situ to magnifications as high as 250,000X.

Sign in / Sign up

Export Citation Format

Share Document