scholarly journals Numerical and Experimental Study on Seakeeping Performance of a High-Speed Trimaran with T-foil in Head Waves

2019 ◽  
Vol 26 (3) ◽  
pp. 65-77 ◽  
Author(s):  
Ang Li ◽  
Yunbo Li
Keyword(s):  
High Speed ◽  
Experimental Tests ◽  
Longitudinal Motion ◽  
Vertical Acceleration ◽  
Large Wave ◽  
Seakeeping Performance ◽  
Head Waves ◽  
Computational Fluid Dynamics Cfd ◽  
Motion Characteristics ◽  
Cfd Method

Abstract The longitudinal motion characteristics of a slender trimaran equipped with and without a T-foil near the bow are investigated by experimental and numerical methods. Computational fluid dynamics ( CFD) method is used in this study. The seakeeping characteristics such as heave, pitch and vertical acceleration in head regular waves are analyzed in various wave conditions. Numerical simulations have been validated by comparisons with experimental tests. The influence of large wave amplitudes and size of T-foil on the longitudinal motion of trimaran are analyzed. The present systematic study demonstrates that the numerical results are in a reasonable agreement with the experimental data. The research implied that the longitudinal motion response values are greatly reduced with the use of T-foil.

Yaw Galloping of a TLWP Platform Under High Speed Currents by Analytical Methods and its Comparison With Experimental Results

2017 ◽  
Author(s):  
Francisco Lamas ◽  
Miguel A. M. Ramirez ◽  
Antonio Carlos Fernandes
Keyword(s):  
High Speed ◽  
Production Systems ◽  
Experimental Tests ◽  
Experimental Results ◽  
Analytical Methodology ◽  
New Approach ◽  
Laboratory Facilities ◽  
Polynomial Curve ◽  
Computational Fluid Dynamics Cfd ◽  
Cfd Analyses

Flow Induced Motions are always an important subject during both design and operational phases of an offshore platform life. These motions could significantly affect the performance of the platform, including its mooring and oil production systems. These kind of analyses are performed using basically two different approaches: experimental tests with reduced models and, more recently, with Computational Fluid Dynamics (CFD) dynamic analysis. The main objective of this work is to present a new approach, based on an analytical methodology using static CFD analyses to estimate the response on yaw motions of a Tension Leg Wellhead Platform on one of the several types of motions that can be classified as flow-induced motions, known as galloping. The first step is to review the equations that govern the yaw motions of an ocean platform when subjected to currents from different angles of attack. The yaw moment coefficients will be obtained using CFD steady-state analysis, on which the yaw moments will be calculated for several angles of attack, placed around the central angle where the analysis is being carried out. Having the force coefficients plotted against the angle values, we can adjust a polynomial curve around each analysis point in order to evaluate the amplitude of the yaw motion using a limit cycle approach. Other properties of the system which are flow-dependent, such as damping and added mass, will also be estimated using CFD. The last part of this work consists in comparing the analytical results with experimental results obtained at the LOC/COPPE-UFRJ laboratory facilities.

NUMERICAL PREDICTION OF VERTICAL SHIP MOTIONS AND ADDED RESISTANCE

2021 ◽  
Vol 159 (A4) ◽  
Author(s):  
F Cakici ◽  
E Kahramanoglu ◽  
A D Alkan
Keyword(s):  
Deep Water ◽  
High Speed ◽  
Computer Experiments ◽  
Navier Stokes ◽  
Ship Motions ◽  
Added Resistance ◽  
Strip Theory ◽  
Head Waves ◽  
Computational Fluid Dynamics Cfd ◽  
Volume Method

Along with the development of computer technology, the capability of Computational Fluid Dynamics (CFD) to conduct ‘virtual computer experiments’ has increased. CFD tools have become the most important tools for researchers to deal with several complex problems. In this study, the viscous approach called URANS (Unsteady Reynolds Averaged Navier-Stokes) which has a fully non-linear base has been used to solve the vertical ship motions and added resistance problems in head waves. In the solution strategy, the FVM (Finite Volume Method) is used that enables numerical discretization. The ship model DTMB 5512 has been chosen for a series of computational studies at Fn=0.41 representing a high speed case. Firstly, by using CFD tools the TF (Transfer Function) graphs for the coupled heave- pitch motions in deep water have been generated and then comparisons have been made with IIHR (Iowa Institute of Hydraulic Research) experimental results and ordinary strip theory outputs. In the latter step, TF graphs of added resistance for deep water have been generated by using CFD and comparisons have been made only with strip theory.

Numerical Prediction of Vertical Ship Motions and Added Resistance

2017 ◽  
Vol 159 (A4) ◽  
Author(s):  
F Cakici ◽  
E Kahramanoglu ◽  
A D Alkan
Keyword(s):  
Deep Water ◽  
High Speed ◽  
Computer Experiments ◽  
Navier Stokes ◽  
Ship Motions ◽  
Added Resistance ◽  
Strip Theory ◽  
Head Waves ◽  
Computational Fluid Dynamics Cfd ◽  
Volume Method

Along with the development of computer technology, the capability of Computational Fluid Dynamics (CFD) to conduct ‘virtual computer experiments’ has increased. CFD tools have become the most important tools for researchers to deal with several complex problems. In this study, the viscous approach called URANS (Unsteady Reynolds Averaged Navier-Stokes) which has a fully non-linear base has been used to solve the vertical ship motions and added resistance problems in head waves. In the solution strategy, the FVM (Finite Volume Method) is used that enables numerical discretization. The ship model DTMB 5512 has been chosen for a series of computational studies at Fn=0.41 representing a high speed case. Firstly, by using CFD tools the TF (Transfer Function) graphs for the coupled heave-pitch motions in deep water have been generated and then comparisons have been made with IIHR (Iowa Institute of Hydraulic Research) experimental results and ordinary strip theory outputs. In the latter step, TF graphs of added resistance for deep water have been generated by using CFD and comparisons have been made only with strip theory.

Aerodynamic Loading Induced by Muzzle Flows on Small Caliber Spin Stabilized Projectiles

2019 ◽  
Vol 142 (2) ◽  
Author(s):  
Chuanlin Chen ◽  
Hui Xu ◽  
Chenlei Huang ◽  
Zhongxin Li ◽  
Zhilin Wu
Keyword(s):  
High Speed ◽  
Exponential Relationship ◽  
Interior Ballistics ◽  
Aerodynamic Loading ◽  
Axial Forces ◽  
Pitch Moment ◽  
Temporal Pressure ◽  
Computational Fluid Dynamics Cfd ◽  
Cfd Method ◽  
Element Method

Abstract In this study, we examined the aerodynamic loading on a small caliber rifle (spin stabilized) projectile moving in a muzzle flow field using an element method to analyze the loading and the effect of the angle of attack (for small angles from 0 to 3 deg) on the different components. The temporal pressure distribution on the projectile, which forms the basis of the element method, was computed using a computational fluid dynamics (CFD) analysis combined with a classical interior ballistics model. Then, a high-speed optical experiment was conducted to verify the results of the CFD method and ensure the accuracy of the calculations. The results were as follows: (a) similar to a large caliber projectile, the total axial force, which consisted primarily of the axial forces on the base and boattail, was found to have an inverse exponential relationship with time; (b) the overall lift was a combination of the lift of the base, boattail, cylinder, and nose; and (c) the interaction between the pitch moment of the base and that of the boattail was found to be the primary contributing factor to the total pitch moment. Based on these results, we recommend that the characteristics of the base and boattail be considered when specifying the geometric configuration of a projectile.

scholarly journals Numerical Analysis on the Hydrodynamic Performance of an Artificially Ventilated Surface-Piercing Propeller

Water ◽  
2018 ◽  
Vol 10 (11) ◽  
pp. 1499 ◽  
Author(s):  
Dongmei Yang ◽  
Zhen Ren ◽  
Zhiqun Guo ◽  
Zeyang Gao
Keyword(s):  
High Speed ◽  
Artificial Ventilation ◽  
Water Immersion ◽  
Numerical Results ◽  
Hydrodynamic Performance ◽  
Heavy Load ◽  
Computational Fluid Dynamics Cfd ◽  
Large Water ◽  
Cfd Method ◽  
Surface Piercing Propeller

When operated under large water immersion, surface piercing propellers are prone to be in heavy load conditions. To improve the hydrodynamic performance of the surface piercing propellers, engineers usually artificially ventilate the blades by equipping a vent pipe in front of the propeller disc. In this paper, the influence of artificial ventilation on the hydrodynamic performance of surface piercing propellers under full immersion conditions was investigated using the Computational Fluid Dynamics (CFD) method. The numerical results suggest that the effect of artificial ventilation on the pressure distribution on the blades decreases along the radial direction. And at low advancing speed, the thrust, torque as well as the efficiency of the propeller are smaller than those without ventilation. However, with the increase of the advancing speed, the efficiency of the propeller rapidly increases and can be greater than the without-ventilation case. The numerical results demonstrates the effectiveness of the artificial ventilation approach for improving the hydrodynamic performance of the surface piercing propellers for high speed planning crafts.

Computational aeroelastic analysis of slowed rotors at high advance ratios

2014 ◽  
Vol 118 (1201) ◽  
pp. 297-313 ◽  
Author(s):  
J. de Montaudouin ◽  
N. Reveles ◽  
M. J. Smith
Keyword(s):  
High Speed ◽  
Rotor Blades ◽  
Vortex Interaction ◽  
Blade Loading ◽  
Blade Vortex Interaction ◽  
Aeroelastic Analysis ◽  
Computational Fluid Dynamics Cfd ◽  
Advance Ratio ◽  
Cfd Method ◽  
Model Rotor

Abstract The aerodynamic and aeroelastic behaviour of a rotor become more complex as advance ratios increase to achieve high-speed forward fight. As the rotor blades encounter large regions of cross and reverse flows during each revolution, strong variations in the local Mach regime are encountered, inducing complex elastic blade deformations. In addition, the wake system may remain in the vicinity of the rotor, adding complexity to the blade loading. The aeroelastic behaviour of a model rotor with advance ratios ranging from 0·5 to 2·0 has been evaluated with aerodynamics provided via a computational fluid dynamics (CFD) method. Significant radial blade-vortex interaction can occur at a high advance ratio; the advance ratio at which this occurs is dependent on the rotor configuration. This condition is accompanied by high vibratory loads, peak negative torsion, and peak torsion and in-plane loads. The high vibratory loading increases the sensitivity of the trim model, so that at some high advance ratios the vibratory loads must be filtered to achieve a trimmed state.

Analysis and Simulation of Inner Flow Condition of a Novel Rotary on/off Valve

2012 ◽  
Vol 220-223 ◽  
pp. 1698-1702
Author(s):  
Jian Chen ◽  
Zhu Ming Su ◽  
Qi Zhou ◽  
Jian Ping Shu
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Flow Condition ◽  
High Speed ◽  
Ansys Fluent ◽  
Revolution Speed ◽  
Pressure Profiles ◽  
Open Case ◽  
Computational Fluid Dynamics Cfd ◽  
Cfd Method

A novel hydraulic rotary high speed on/off valve is investigated. The function of the outlet turbine and the effect on revolution speed of valve spool are analyzed. The inner fluid flow condition under full open case of the on/off valve is simulated using computational fluid dynamics(CFD) method based on Ansys/Fluent and velocity and pressure profiles of fluid inside valve are obtained. Suggestions on optimizing the geometry of valve to decrease transition losses are given.

scholarly journals Motion Prediction of Catamaran with a Semisubmersible Bow in Wave

2016 ◽  
Vol 23 (1) ◽  
pp. 37-44 ◽  
Author(s):  
Hanbing Sun ◽  
Fengmei Jing ◽  
Yi Jiang ◽  
Jin Zou ◽  
Jiayuan Zhuang ◽  
...  
Keyword(s):  
Grid Method ◽  
Scale Model ◽  
Small Scale ◽  
Motion Prediction ◽  
Vertical Acceleration ◽  
Overset Grid ◽  
Motion Response ◽  
Movement Data ◽  
Seakeeping Performance ◽  
Head Waves

Abstract Compared with standard vessels, a slender catamaran with a semi-submerged bow (SSB) demonstrates superior seakeeping performance. To predict the motion of an SSB catamaran, computational fluid dynamics methods are adopted in this study and results are validated through small-scale model tests. The pitch, heave, and vertical acceleration are calculated at various wavelengths and speeds. Based on the overset grid and motion region methods, this study obtains the motion responses of an SSB catamaran in regular head waves. The results of the numerical studies are validated with the experimental data and show that the overset grid method is more accurate in predicting the motion of an SSB catamaran; the errors can be controlled within 20%. The movement data in regular waves shows that at a constant speed, the motion response initially increases and then decreases with increasing wavelength. This motion response peak is due to the encountering frequency being close to the natural frequency. Under identical sea conditions, the motion response increases with the increasing Froude number. The motion prediction results, that derive from a short-term irregular sea state, show that there is an optimal speed range that can effectively reduce the amplitude of motion.

Comparison between the Dynamic Behavior of the Non-stepped and Double-stepped Planing Hulls in Rough Water: A Numerical Study

2020 ◽  
Vol 36 (01) ◽  
pp. 52-66
Author(s):  
Arman Esfandiari ◽  
Sasan Tavakoli ◽  
Abbas Dashtimanesh
Keyword(s):  
Numerical Simulations ◽  
High Speed ◽  
Numerical Study ◽  
Vertical Plane ◽  
Recent Decade ◽  
Vertical Acceleration ◽  
Gravitational Acceleration ◽  
Head Waves ◽  
Calm Water ◽  
Rough Water

Reducing vertical motions of high-speed planing hulls in rough water is one of the most important factors that help a boat to become more operable, and will benefit the structure of the boat and the crew on board. In the recent decade, stepped planing hulls have been investigated with emphasis on their better performance in calm water than that of nonstepped planing hulls. However, there are still doubts about their performance in rough water. In this study, we investigate this problem by providing numerical simulations for motions of a double-stepped and a non-stepped planing hull in a vertical plane when they encounter head waves. The problem will be solved using the finite volume method and volume of fluid method. To this end, a numerical computational fluid dynamics code (STARCCM1) has been used. Accuracy of the numerical simulations is evaluated by comparing their outcome with available experimental data. The dynamic response of the investigated hulls has been numerically modeled for two different wave lengths, one of which is smaller than the boat length and the other which is larger than the boat length. Using the numerical simulations, heave and pitch motions as well as vertical acceleration are found. It has been found that at wave lengths larger than the boat length, heave amplitude decreases by 10–40%when two steps are added to the bottom of a vessel. It has also been observed that pitch of a planing hull is reduced by 18–32% in the presence of the two steps on its bottom. Finally, it has been observed that for wave lengths larger than the boat length, the maximum vertical acceleration decreases by a gravitational acceleration of about .2–.7.

Comparative Investigation of an Automated Oceanic Wave Surface Glider Robot Influence on Resistance Prediction Using CFD Method

2015 ◽  
Vol 710 ◽  
pp. 91-97
Author(s):  
Aladdin Elhadad ◽  
Wen Yang Duan ◽  
Rui Deng
Keyword(s):  
High Speed ◽  
Water Resistance ◽  
Comparative Investigation ◽  
Numerical Predictions ◽  
Calm Water ◽  
Oceanic Wave ◽  
Computational Fluid Dynamics Cfd ◽  
Wave Glider ◽  
Cfd Method ◽  
Solution Parameters

Thewave glideris composed of two parts: the float is roughly the size and shape of a surfboard that contains all the instrumentation needed for scientific experiments; the sub has wings and hangs 6 meters below on an umbilical tether. This difference allows wave energy to be harvested to produce forward thrust. According to the lake of design information and data for thewave glider, the main aim of the study is usingcomputational fluid dynamics (CFD)to present a method to predict calm water resistance for the floating part of thewave glider(the hull).Wigley parabolic hulland high speed round bilge form (NPL)have been investigated in order to estimate the hydrodynamic performances of the hull usingCFDsoftware fluent.Wave glideris designed with slender hull shapes in order to decrease the wave making resistance of the ship.In this paper a method is evaluated by comparing the numerical predictions forwigleyandNPLforms (2m) using the same mesh generation method under the same conditions to design the hull. Calculations fortotal calm water resistanceare carried out using three different mesh sizes for Froude numbers in the range of 0.10 to 0.40 and compared for accuracy of the solution parameters. The close agreement between the numerical predictions shows the importance ofCFDapplications in estimating the hydrodynamics performance to design the floating hull and the numerical method is useful in glider design. This means that the method discussed in this paper can be used for the resistance calculation of some hulls like the float of the glider.

Sign in / Sign up

Export Citation Format

Share Document