scholarly journals Rail Joint Model Based on the Euler-Bernoulli Beam Theory

2019 ◽  
Vol 8 (2) ◽  
pp. 16-29
Author(s):  
Traian Mazilu ◽  
Ionuţ Radu Răcănel ◽  
Cristian Lucian Ghindea ◽  
Radu Iuliu Cruciat ◽  
Mihai-Cornel Leu
Keyword(s):  
Beam Theory ◽  
Joint Model ◽  
Experimental Results ◽  
Winkler Foundation ◽  
Bernoulli Beam ◽  
Model Based ◽  
Bernoulli Beam Theory ◽  
Proposed Model ◽  
Joint Gap ◽  
Euler Bernoulli Beam

Abstract In this paper, a rail joint model consisting of three Euler-Bernoulli beams connected via a Winkler foundation is proposed in order to point out the influence of the joint gap length upon the stiffness of the rail joint. Starting from the experimental results aiming the stiffness of the rail joint, the Winkler foundation stiffness of the model has been calculated. Using the proposed model, it is shown that the stiffness of the rail joint of the 49 rail can decreases up to 10 % when the joint gap length increases from 0 to 20 mm.

An Analytical Model for Beam Flexure Modules Based on the Timoshenko Beam Theory

2017 ◽  
Author(s):  
M. H. Kahrobaiyan ◽  
M. Zanaty ◽  
S. Henein
Keyword(s):  
Timoshenko Beam ◽  
Axial Load ◽  
Compliant Mechanisms ◽  
Slenderness Ratio ◽  
Beam Theory ◽  
Timoshenko Beam Theory ◽  
Bernoulli Beam ◽  
Model Based ◽  
Bernoulli Beam Theory ◽  
Euler Bernoulli Beam

Short beams are the key building blocks in many compliant mechanisms. Hence, deriving a simple yet accurate model of their elastokinematics is an important issue. Since the Euler-Bernoulli beam theory fails to accurately model these beams, we use the Timoshenko beam theory to derive our new analytical framework in order to model the elastokinematics of short beams under axial loads. We provide exact closed-form solutions for the governing equations of a cantilever beam under axial load modeled by the Timoshenko beam theory. We apply the Taylor series expansions to our exact solutions in order to capture the first and second order effects of axial load on stiffness and axial shortening. We show that our model for beam flexures approaches the model based on the Euler-Bernoulli beam theory when the slenderness ratio of the beams increases. We employ our model to derive the stiffness matrix and axial shortening of a beam with an intermediate rigid part, a common element in the compliant mechanisms with localized compliance. We derive the lateral and axial stiffness of a parallelogram flexure mechanism with localized compliance and compare them to those derived by the Euler-Bernoulli beam theory. Our results show that the Euler-Bernoulli beam theory predicts higher stiffness. In addition, we show that decrease in slenderness ratio of beams leads to more deviation from the model based on the Euler-Bernoulli beam theory.

Nonlinear Vibration of Carbon Nanotube Resonators Considering Higher Modes

2015 ◽  
Author(s):  
Hassan Askari ◽  
Ebrahim Esmailzadeh
Keyword(s):  
Carbon Nanotube ◽  
Multiple Scales ◽  
Beam Theory ◽  
Nonlinear Ordinary Differential Equation ◽  
Winkler Foundation ◽  
Bernoulli Beam ◽  
Bernoulli Beam Theory ◽  
Objective System ◽  
Nonlinear Forced Vibration ◽  
Euler Bernoulli Beam

Nonlinear forced vibration of the carbon nanotubes based on the Euler-Bernoulli beam theory is studied. The Euler-Bernoulli beam theory is implemented to find the governing equation of the vibrations of the carbon nanotube. The Pasternak and Nonlinear Winkler foundation is assumed for the objective system. It is supposed that the system is supported by hinged-hinged boundary conditions. The Galerkin procedure is employed in order to find the nonlinear ordinary differential equation of the vibration of the objective system considering two modes of vibrations. The primary and secondary resonant cases are developed for the objective system employing the multiple scales method. Influence of different factors such as length, thickness, position of applied force, Pasternak and Winkler foundation are fully shown on the primary and secondary resonance of the system.

Analysis of bimorph piezoelectric beam energy harvesters using Timoshenko and Euler–Bernoulli beam theory

2012 ◽  
Vol 24 (2) ◽  
pp. 226-239 ◽  
Author(s):  
Gang Wang
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Slenderness Ratio ◽  
Beam Theory ◽  
Bernoulli Beam ◽  
Energy Harvesters ◽  
Bernoulli Beam Theory ◽  
Spectral Finite Element ◽  
Euler Bernoulli Beam ◽  
Element Method

Single-degree-of-freedom lumped parameter model, conventional finite element method, and distributed parameter model have been developed to design, analyze, and predict the performance of piezoelectric energy harvesters with reasonable accuracy. In this article, a spectral finite element method for bimorph piezoelectric beam energy harvesters is developed based on the Timoshenko beam theory and the Euler–Bernoulli beam theory. Linear piezoelectric constitutive and linear elastic stress/strain models are assumed. Both beam theories are considered in order to examine the validation and applicability of each beam theory for a range of harvester sizes. Using spectral finite element method, a minimum number of elements is required because accurate shape functions are derived using the coupled electromechanical governing equations. Numerical simulations are conducted and validated using existing experimental data from the literature. In addition, parametric studies are carried out to predict the performance of a range of harvester sizes using each beam theory. It is concluded that the Euler–Bernoulli beam theory is sufficient enough to predict the performance of slender piezoelectric beams (slenderness ratio > 20, that is, length over thickness ratio > 20). In contrast, the Timoshenko beam theory, including the effects of shear deformation and rotary inertia, must be used for short piezoelectric beams (slenderness ratio < 5).

Case Study of the Effect of Combined Axial and Lateral Loadings on the Critical Buckling Capacity of Piping Supports

2020 ◽  
Author(s):  
Phillip Wiseman ◽  
Alex Mayes ◽  
Shreeya Karnik
Keyword(s):  
Large Deformation ◽  
Axial Loading ◽  
Beam Theory ◽  
Second Order ◽  
Lateral Acceleration ◽  
Bernoulli Beam ◽  
Deformation Method ◽  
Closed Form Solutions ◽  
Bernoulli Beam Theory ◽  
Euler Bernoulli Beam

Abstract Snubbers are used in industry to restrain piping in dynamic events which can see significant axial loading as well as lateral acceleration. Snubbers are often employed with an extension when required to bridge gaps between the piping and building structure. As a result, they are susceptible to buckling instability issues. The pipe support and restraint design by analysis buckling criteria for supports given within the American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code, Section III, Division 1, Subsection NF is investigated to determine the behavior of snubber assemblies under combined axial and lateral loadings. Four types of analyses are performed on the assemblies under the action of axial loading to demonstrate finite element and closed form solutions. These include the following: linear Eigen buckling, nonlinear second order large deformation method, energy method and Euler Bernoulli beam theory. In addition, a variety of snubber assembly sizes are subjected to combined axial and lateral loading in the form of multiple magnitudes of lateral acceleration. The behavior was analyzed by the Euler Bernoulli beam theory and nonlinear second order large deformation method. The techniques of each method are compared providing explanations of the assumptions taken, relevant limitations and recommended applications.

Sign in / Sign up

Export Citation Format

Share Document