scholarly journals Comparison of Detailed Belt - Cylinder Interaction Model with Classical Belt Friction Formula

2019 ◽  
Vol 69 (3) ◽  
pp. 9-16
Author(s):  
Radek Bulín ◽  
Michal Hajžman
Keyword(s):  
Finite Elements ◽  
Absolute Nodal Coordinate Formulation ◽  
Interaction Model ◽  
Contact Forces ◽  
Equilibrium Conditions ◽  
Absolute Nodal Coordinate ◽  
Rigid Cylinder ◽  
Nonlinear Contact ◽  
The Absolute

AbstractThis paper deals with a comparison of the classical belt friction formula, also called Euler-Eytelwein equation, with a detailed belt-cylinder interaction model. The belt friction is a typical pedagogical problem where the usage of equilibrium conditions is shown, but also have a practical usage, e.g. a heavy ship anchor pulling or a belt brake. The presented belt-cylinder interaction model is based on the absolute nodal coordinate formulation of beam finite elements with the consideration of nonlinear contact forces between a beam and a rigid cylinder.

Three-Dimensional Solid Brick Element Using Slopes in the Absolute Nodal Coordinate Formulation

2013 ◽  
Vol 9 (2) ◽  
Author(s):  
Alexander Olshevskiy ◽  
Oleg Dmitrochenko ◽  
Chang-Wan Kim
Keyword(s):  
Finite Element ◽  
Finite Elements ◽  
Absolute Nodal Coordinate Formulation ◽  
Mass Matrix ◽  
Equations Of Motion ◽  
Test Problems ◽  
Absolute Nodal Coordinate ◽  
Highly Nonlinear ◽  
Brick Element ◽  
The Absolute

The present paper contributes to the field of flexible multibody systems dynamics. Two new solid finite elements employing the absolute nodal coordinate formulation are presented. In this formulation, the equations of motion contain a constant mass matrix and a vector of generalized gravity forces, but the vector of elastic forces is highly nonlinear. The proposed solid eight node brick element with 96 degrees of freedom uses translations of nodes and finite slopes as sets of nodal coordinates. The displacement field is interpolated using incomplete cubic polynomials providing the absence of shear locking effect. The use of finite slopes describes the deformed shape of the finite element more exactly and, therefore, minimizes the number of finite elements required for accurate simulations. Accuracy and convergence of the finite element is demonstrated in nonlinear test problems of statics and dynamics.

Comparison of Fully Parameterized and Gradient Deficient Elements in the Absolute Nodal Coordinate Formulation

2017 ◽  
Author(s):  
Johannes Gerstmayr ◽  
Peter Gruber ◽  
Alexander Humer
Keyword(s):  
Finite Elements ◽  
Absolute Nodal Coordinate Formulation ◽  
Dynamic Test ◽  
Test Problems ◽  
Rotational Parameter ◽  
Absolute Nodal Coordinate ◽  
Beam Elements ◽  
Spatial Beams ◽  
Numerical Instabilities ◽  
The Absolute

The aim of the present paper is to evaluate six particular beam finite elements based on the absolute nodal coordinate formulation (ANCF). Specifically, accuracy, computational efficiency and numerical stability are compared for those beam finite elements. The finite elements under consideration are planar as well as spatial beams, which are formulated both for the Bernoulli-Euler case as well as for shear and cross-section deformation. While all of the investigated elements have been exposed to specific numerical tests already before, a comparative test has not been performed in the past. The numerical examples cover large deformation static and dynamic problems, which represent typical applications of such beam elements. Finally, the dynamic test problems show that the thin spatial beam formulation, which includes a rotational parameter, leads to well-known numerical instabilities.

Finite Element Analysis of the Geometric Stiffening Effect Using the Absolute Nodal Coordinate Formulation

2005 ◽  
Author(s):  
Daniel Garci´a-Vallejo ◽  
Hiroyuki Sugiyama ◽  
Ahmed A. Shabana
Keyword(s):  
Finite Element ◽  
Finite Elements ◽  
Linear Elasticity ◽  
Absolute Nodal Coordinate Formulation ◽  
Coupling Effect ◽  
Mass Matrix ◽  
Element Analysis ◽  
Linear Elasticity Theory ◽  
Absolute Nodal Coordinate ◽  
The Absolute

In this paper, the limitations of the linear elasticity finite element solutions in describing the coupling between the extensional and bending displacements are discussed. The fact that incorrect unstable solutions are obtained for models with more than one finite element using the linear elasticity theory motivates the analytical study of the rotating beam presented in this paper. It is shown, as documented in the literature, that the instability of the incorrect solution is directly related to the singularity of the stiffness matrix, and such an instability occurs when the angular velocity reaches the first bending fundamental frequency of the beam. The increase in the number of finite elements only leads to an increase of the critical speed. Crucial in the analysis presented in this paper is the fact that the mass matrix and the form of the elastic forces obtained using the absolute nodal coordinate formulation remain the same under orthogonal coordinate transformation. The absolute nodal coordinate formulation, in contrast to conventional finite element formulations, does account for the effect of the coupling between bending and extension. A similar concept can be incorporated into the finite element floating frame of reference formulation in order to introduce coupling between the axial and bending displacements. Nonetheless, when the linear theory of elasticity is used and no special measures are taken to account for the coupling effect as proposed in the literature, there always exists a critical velocity regardless of the number of finite elements used.

Performance of the Incremental and Non-Incremental Finite Element Formulations in Flexible Multibody Problems

1999 ◽  
Vol 122 (4) ◽  
pp. 498-507 ◽  
Author(s):  
Marcello Campanelli ◽  
Marcello Berzeri ◽  
Ahmed A. Shabana
Keyword(s):  
Finite Element ◽  
Multibody Systems ◽  
Absolute Nodal Coordinate Formulation ◽  
Flexible Multibody Systems ◽  
Large Displacement ◽  
Body Motion ◽  
Absolute Nodal Coordinate ◽  
Flexible Multibody ◽  
The Absolute ◽  
Finite Element Formulations

Many flexible multibody applications are characterized by high inertia forces and motion discontinuities. Because of these characteristics, problems can be encountered when large displacement finite element formulations are used in the simulation of flexible multibody systems. In this investigation, the performance of two different large displacement finite element formulations in the analysis of flexible multibody systems is investigated. These are the incremental corotational procedure proposed in an earlier article (Rankin, C. C., and Brogan, F. A., 1986, ASME J. Pressure Vessel Technol., 108, pp. 165–174) and the non-incremental absolute nodal coordinate formulation recently proposed (Shabana, A. A., 1998, Dynamics of Multibody Systems, 2nd ed., Cambridge University Press, Cambridge). It is demonstrated in this investigation that the limitation resulting from the use of the infinitesmal nodal rotations in the incremental corotational procedure can lead to simulation problems even when simple flexible multibody applications are considered. The absolute nodal coordinate formulation, on the other hand, does not employ infinitesimal or finite rotation coordinates and leads to a constant mass matrix. Despite the fact that the absolute nodal coordinate formulation leads to a non-linear expression for the elastic forces, the results presented in this study, surprisingly, demonstrate that such a formulation is efficient in static problems as compared to the incremental corotational procedure. The excellent performance of the absolute nodal coordinate formulation in static and dynamic problems can be attributed to the fact that such a formulation does not employ rotations and leads to exact representation of the rigid body motion of the finite element. [S1050-0472(00)00604-8]

Elastic Forces and Coordinate Systems in the Finite Element Formulations

1999 ◽  
Author(s):  
Marcello Berzeri ◽  
Marcello Campanelli ◽  
A. A. Shabana
Keyword(s):  
Finite Element ◽  
Absolute Nodal Coordinate Formulation ◽  
Frame Of Reference ◽  
Coordinate Systems ◽  
Absolute Nodal Coordinate ◽  
Floating Frame Of Reference ◽  
Elastic Forces ◽  
Floating Frame ◽  
The Absolute ◽  
Finite Element Formulations

Abstract The equivalence of the elastic forces of finite element formulations used in flexible multibody dynamics is the focus of this investigation. Two conceptually different finite element formulations that lead to exact modeling of the rigid body dynamics will be used. These are the floating frame of reference formulation and the absolute nodal coordinate formulation. It is demonstrated in this study that different element coordinate systems, which are used for the convenience of describing the element deformations in the absolute nodal coordinate formulation, lead to similar results as the element size is reduced. The equivalence of the elastic forces in the absolute nodal coordinate and the floating frame of reference formulations is shown. The result of this analysis clearly demonstrates that the instability observed in high speed rotor analytical models due to the neglect of the geometric centrifugal stiffening is not a problem inherent to a particular finite element formulation but only depends on the beam model that is used. Fourier analysis of the solutions obtained in this investigation also sheds new light on the fundamental problem of the choice of the deformable body coordinate system in the floating frame of reference formulation. A new method is presented and used to obtain a simple expression for the elastic forces in the absolute nodal coordinate formulation. This method, which employs a nonlinear elastic strain-displacement relationship, does not result in an unstable solution when the angular velocity is increased.

Sign in / Sign up

Export Citation Format

Share Document