scholarly journals Steady and Transient Thermal State of Turbine Disk Estimation for Life Time Monitoring

2020 ◽  
Vol 2020 (3) ◽  
pp. 21-29
Author(s):  
Yevhen Martseniuk
Keyword(s):  
Thermal State ◽  
Equivalent Stress ◽  
Life Time ◽  
Peripheral Zone ◽  
Operating Mode ◽  
Labyrinth Seals ◽  
Turbine Engine ◽  
Critical Zones ◽  
Cooling Air Flow ◽  
Cooling Air

AbstractIn connection with increasing intensification of the working process in a gas turbine engine and increasing requirements for economy, the problem of defining and monitoring the main parts lifetime is becoming more vital. Modern algorithms of the monitoring systems are based on taking into account the levels of part temperature and total equivalent stress throughout the flight cycle. Thermal and stress-strain states of the critical zones of the main parts are determined on the basis of information received from the sensors installed in the engine gas path. Turbine disks are located in the internal cavities of the engine and are cooled by air from the compressor. However, in some designs, the disk cavity can be separated from the place of cooling air bleed by several stages of non-contact labyrinth seals, which will lead to some delay in changing the parameters of the cooling air flow when changing the engine operating mode. It has been observed that if this situation is not taken into account, it can lead to significant errors (more than 40%) in determining the lifetime for the peripheral zone of the disk. At the same time, this error is minimal for the hub and the middle zone of the disk, and the existing monitoring algorithms can be used.

scholarly journals Ceramic Thermal Barrier Coatings for Turbine Engine Components

1982 ◽  
Author(s):  
D. S. Duvall ◽  
D. L. Ruckle
Keyword(s):  
Thermal Barrier Coatings ◽  
Ceramic Coatings ◽  
Thermal Barrier ◽  
Barrier Coatings ◽  
Turbine Engine ◽  
Thermal Environments ◽  
Strain Tolerance ◽  
Endurance Testing ◽  
Plasma Sprayed ◽  
Cooling Air

The durability of plasma sprayed ceramic thermal barrier coatings subjected to cyclic thermal environments has been improved substantially by improving the strain tolerance of the ceramic structure and also by controlling the substrate temperature during the application of the coating. Improved strain tolerance was achieved by using ceramic structures with increased porosity, microcracking or segmentation. Plasma spraying on a controlled-temperature substrate also has been shown to improve durability by reducing harmful residual stresses. The most promising of the strain tolerant ceramic coatings have survived up to 6000 cycles of engine endurance testing with no coating or vane platform damage. In side-by-side engine tests, thermal barrier coatings have shown that they greatly reduce platform distress compared to conventionally coated vanes in addition to permitting reductions in cooling air and attendant increases in engine efficiency.

Analysis of Effect of Advanced Technique Configurations on Overall Performance of High Bypass Turbofan Engine

2014 ◽  
Author(s):  
Liu Jian Jun
Keyword(s):  
Air Flow ◽  
Engine Performance ◽  
Performance Model ◽  
Direct Drive ◽  
Nozzle Throat ◽  
Advanced Technique ◽  
Turbofan Engine ◽  
Overall Performance ◽  
Cooling Air Flow ◽  
Cooling Air

An analytical study was undertaken using the performance model of a two spool direct drive high BPR 300kN thrust turbofan engine, to investigate the effects of advanced configurations on overall engine performance. These include variable bypass nozzle, variable cooling air flow and more electric technique. For variable bypass nozzle, analysis on performance of outer fan at different conditions indicates that different operating points cannot meet optimal performance at the same time if the bypass nozzle area kept a constant. By changing bypass nozzle throat area at different states, outer fan operating point moves to the location where airflow and efficiency are more appropriate, and have enough margin away from surge line. As a result, the range of variable area of bypass nozzle throat is determined which ensures engine having a low SFC and adequate stability. For variable cooling airflow, configuration of turbine cooling air flow extraction and methodology for obtaining change of cooling airflow are investigated. Then, base on temperature analysis of turbine vane and blade and resistance of cooling airflow, reduction of cooling airflow is determined. Finally, using performance model which considering effect of cooling air flow on work and efficiency of turbine, variable cooling airflow effect on overall performance is analyzed. For more electric technique, the main characteristic is to use power off-take instead of overboard air extraction. Power off-take and air extraction effect on overall performance of high bypass turbofan engine is compared. Investigation demonstrates that power offtake will have less SFC.

Enhancement of Labyrinth Seals Efficiency by Means of a Multi-Objective Optimization Technique

2018 ◽  
Author(s):  
Mikhail Gritckevich ◽  
Kunyuan Zhou ◽  
Vincent Peltier ◽  
Markus Raben ◽  
Olga Galchenko
Keyword(s):  
Optimization Technique ◽  
Leakage Flow ◽  
Multi Objective Optimization ◽  
Labyrinth Seals ◽  
Engine Operation ◽  
Turbine Engine ◽  
Multi Objective ◽  
Single Objective ◽  
Ansys Workbench ◽  
Comprehensive Study

A comprehensive study of several labyrinth seals has been performed in the framework of both single-objective and multi-objective optimizations with the main focus on the effect of stator grooves formed due to the rubbing during gas turbine engine operation. For that purpose, the developed optimization workflow based on the DLR-AutoOpti optimizer and ANSYS-Workbench CAE environment has been employed to reduce the leakage flow and windage heating for several seals. The obtained results indicate that the seal designs obtained from optimizations without stator grooves have worse performance during the lifecycle than those with the stator grooves, justifying the importance of considering this effect for real engineering applications.

scholarly journals Analysis of the energetic/environmental performances of gas turbine plant: Effect of thermal barrier coatings and mass of cooling air

2009 ◽  
Vol 13 (1) ◽  
pp. 147-164 ◽  
Author(s):  
Ion Ion ◽  
Anibal Portinha ◽  
Jorge Martins ◽  
Vasco Teixeira ◽  
Joaquim Carneiro
Keyword(s):  
Thermal Conductivity ◽  
Gas Turbine ◽  
Thermal Barrier Coatings ◽  
Turbine Blades ◽  
Heat Transfer Analysis ◽  
Thermal Barrier ◽  
Inlet Temperature ◽  
Barrier Coatings ◽  
Cooling Air Flow ◽  
Cooling Air

Zirconia stabilized with 8 wt.% Y2O3 is the most common material to be applied in thermal barrier coatings owing to its excellent properties: low thermal conductivity, high toughness and thermal expansion coefficient as ceramic material. Calculation has been made to evaluate the gains of thermal barrier coatings applied on gas turbine blades. The study considers a top ceramic coating Zirconia stabilized with 8 wt.% Y2O3 on a NiCoCrAlY bond coat and Inconel 738LC as substrate. For different thickness and different cooling air flow rates, a thermodynamic analysis has been performed and pollutants emissions (CO, NOx) have been estimated to analyze the effect of rising the gas inlet temperature. The effect of thickness and thermal conductivity of top coating and the mass flow rate of cooling air have been analyzed. The model for heat transfer analysis gives the temperature reduction through the wall blade for the considered conditions and the results presented in this contribution are restricted to a two considered limits: (1) maximum allowable temperature for top layer (1200?C) and (2) for blade material (1000?C). The model can be used to analyze other materials that support higher temperatures helping in the development of new materials for thermal barrier coatings.

Sign in / Sign up

Export Citation Format

Share Document