scholarly journals Configuring of 3-axis vertical CNC Machine for Rapid Prototyping with two Translatory and one Rotary Axes

2020 ◽  
Vol 45 (1) ◽  
pp. 1-9
Author(s):  
Nikola Vorkapić ◽  
Saša Živanović ◽  
Nikola Slavković ◽  
Zoran Dimić ◽  
Branko Kokotović
Keyword(s):  
Rapid Prototyping ◽  
Virtual Machine ◽  
Cnc Machine Tool ◽  
Cnc Machine ◽  
Software Environment ◽  
Machine Model ◽  
Rotary Axes ◽  
Cylindrical Coordinate ◽  
G Code ◽  
And Control

This paper describes the configuration of a 3-axis vertical CNC machine tool for rapid prototyping with one rotary and two translational axes. The machine works in a polar-cylindrical coordinate system. The structure of the machine is C’OXZ. The virtual machine model is configured in the PTC Creo software environment. After configuring the virtual machine, the simulation of the CLFbased was performed in the mentioned software environments, and then the verification according to the G-code program in the Vericut software environment was performed. Programming and control of the configured prototype machine are realized in the LinuxCNC software environment, which is based on the PC platform. Also, in this paper, digital twin of machine realized in a python software environment is shown. The presented results show the proper functioning of the whole system.

scholarly journals Development of an educational 3-axis CNC machine tool for rapid prototyping with two translational and one rotary axis

Tehnika ◽  
2020 ◽  
Vol 75 (6) ◽  
pp. 725-732
Author(s):  
Nikola Vorkapić ◽  
Saša Živanović ◽  
Zoran Dimić
Keyword(s):  
Rapid Prototyping ◽  
Machine Tool ◽  
Virtual Machine ◽  
Machine Design ◽  
Programming System ◽  
Cnc Machine Tool ◽  
Cnc Machine ◽  
Rotary Axis ◽  
System A ◽  
Cad Cam

The paper shows the development of a 3-axis CNC machine tool for rapid prototyping by subtracting materials, with two translational and one rotating axis, whose control is based on the LinuxCNC system, with an integrated virtual machine as a digital twin. The concepts of machines with one rotary axis were analyzed and the concept of a machine for realization was adopted, which is completely configured in a CAD/CAM environment. For successful verification of the programming system, a virtual machine has been configured in the CAD/CAM system, as well as in Vericut. The final validation of the machine design was achieved by its trial work on characteristic examples.

Supervision and Control Architecture for CNC Machine TOOL Using Rapid Prototyping

2015 ◽  
Vol 9 (3) ◽  
pp. 212
Author(s):  
João Mauricio Rosario ◽  
Daniel Kubiak ◽  
Edgard Oliveira ◽  
Almiro Franco Silveira ◽  
Leonimer F. Melo
Keyword(s):  
Rapid Prototyping ◽  
Machine Tool ◽  
Control Architecture ◽  
Cnc Machine Tool ◽  
Cnc Machine ◽  
And Control

scholarly journals Configuring the programming and control systems for a mini 3-axis CNC machine tool on the Raspberry PI platform

Tehnika ◽  
2019 ◽  
Vol 74 (6) ◽  
pp. 823-831
Author(s):  
Saša Živanović ◽  
Nikola Vorkapić ◽  
Zoran Dimić
Keyword(s):  
Machine Tool ◽  
Control Systems ◽  
Raspberry Pi ◽  
Cnc Machine Tool ◽  
Cnc Machine ◽  
And Control

Monitoring and Control System Design for Tool Wear Condition of CNC Machine Based on Artificial Neural Networks

2014 ◽  
Vol 556-562 ◽  
pp. 3251-3254 ◽  
Author(s):  
Dan Su
Keyword(s):  
Machine Tool ◽  
Real Time ◽  
Cnc Machine Tool ◽  
Monitoring And Control ◽  
Cnc Machine ◽  
Monitoring And Control System ◽  
High Measurement ◽  
Software Modules ◽  
Equipment Wear ◽  
And Control

Spindle wear of CNC machine affects the working efficiency of the machine. To solve this problem, the reasons for the generation of CNC machine tool equipment wear is analyzed, the system's hardware modules and software modules are designed and implemented in accordance with the system requirements. Parameters such as input and output power, spindle speed of CNC machine tool equipment are acquired by the sensor circuit. After a comprehensive analysis of the data, system software combined with neural network model displays the test results on the LCD screen, real-time output of CNC machine tool equipment operating status and the spindle wear. Thus the operation of CNC machine is ensured and equipment failure is avoided. Through the system test, indicating that the proposed system can real-time output the monitor results of spindle wear of CNC machine tool equipment, and has high measurement accuracy for the main parameters such as power and efficiency of the equipment.

Automation of CNC Machine Tool Programming Using STEP-NC (ISO 14649)

2014 ◽  
Vol 656 ◽  
pp. 206-214 ◽  
Author(s):  
Janusz Pobozniak
Keyword(s):  
Machine Tool ◽  
Automatic Generation ◽  
Automatic Recognition ◽  
Cnc Machine Tool ◽  
Cnc Machine ◽  
Code Language ◽  
G Code ◽  
Iso 10303 ◽  
Iso 6983 ◽  
Manufacturing Features

The paper presents the new possibilities of automation of CNC machine tool programming using STEP-NC (ISO 14649). The drawbacks of G-code language (ISO 6983) still widely used and the data structure of new STEP-NC standard are presented. Next, the automation possibilities, namely automatic recognition of manufacturing features based on ISO 10303 files, automatic generation of STEP-NC programs based on manufacturing features defined in ISO 10303-224/ISO 14649 and automatic modification of STEP-NC (ISO 14649) programs are presented.

The Turing Machine Model of Sensing, Manipulation, and Control

1989 ◽  
Author(s):  
Constantine Tsikos ◽  
Tom Chmielewski ◽  
Brian Frederick
Keyword(s):  
Turing Machine ◽  
Machine Model ◽  
And Control ◽  
Manipulation And Control
Sign in / Sign up

Export Citation Format

Share Document