scholarly journals High-speed Image Matching by Extracting Block Areas and Pixels Using Two-stage Genetic Algorithm.

2001 ◽  
Vol 67 (6) ◽  
pp. 987-991 ◽  
Author(s):  
Fumihiko SAITOH
2018 ◽  
Vol 39 (7) ◽  
pp. 1700809 ◽  
Author(s):  
Xiao Kuang ◽  
Zeang Zhao ◽  
Kaijuan Chen ◽  
Daining Fang ◽  
Guozheng Kang ◽  
...  

2020 ◽  
Vol 12 (12) ◽  
pp. 168781402098437
Author(s):  
Liu Jiang ◽  
Guo Zhiping ◽  
Miao Shujing ◽  
He Xiangxin ◽  
Zhu Xinyu

In order to meet the requirements of output torque, efficiency and compact shape of micro-spindles for small parts machining, a two-stage axial micro air turbine spindle with an axial inlet and outlet is proposed. Based on the k-ω turbulence model of SST, the flow field and operation characteristics of the two-stage axial micro air turbine spindle were studied using computational fluid dynamics (CFD) combined with an experimental study. We obtained the air turbine spindle under different working conditions of the loss and torque characteristics. When the inlet pressure was 300 KPa, the output speed of the two-stage turbine was 100,000 rpm, 9% higher than that of a single-stage turbine output torque. The total torque reached 6.39 N·mm, and the maximum efficiency of the turbine and the spindle were 42.2% and 32.3%, respectively. Through the research on the innovative structure of the two-stage axial micro air turbine spindle, the overall performance of the principle prototype has been significantly improved and the problems of insufficient output torque and low working efficiency in high-speed micro-machining can be solved practically, which laid a solid foundation for improving the machining efficiency of small parts and reducing the size of micro machine tool.


2021 ◽  
Vol 104 (3) ◽  
pp. 003685042110311
Author(s):  
Kai Hu ◽  
Guangming Zhang ◽  
Wenyi Zhang

Sound quality (SQ) has become an important index to measure the competitiveness of motor products. To better evaluate and optimize SQ, a novelty SQ evaluation and prediction model of high-speed permanent magnet motor (HSPMM) with better accuracy is presented in this research. Six psychoacoustic parameters of A-weighted sound pressure level (ASPL), loudness, sharpness, roughness, fluctuation strength (FS), and perferred-frequency speech interference (PSIL) were adopted to objectively evaluate the SQ of HSPMM under multiple operating conditions and subjective evaluation was also conducted by the combination of semantic subdivision method and grade scoring method. The evaluation results show that the SQ is poor, which will have a certain impact on human psychology and physiology. The correlation between the objective evaluation parameters and the subjective scores is analyzed by coupling the subjective and objective evaluation results. The average error of multiple linear regression (MLR) model is 7.10%. It has good accuracy, but poor stability. In order to improve prediction accuracy, a new predicted model of radial basis function (RBF) artificial neural network was put forward based on genetic algorithm (GA) optimization. Compared with MLR, its average error rate is reduced by 3.16% and the standard deviation is reduced by 1.841. In addition, the weight of each objective parameter was analyzed. The new predicted model has a better accuracy. It can evaluate and optimize the SQ exactly. The research methods and conclusions of this paper can be extended to the evaluation, prediction, and optimization of SQ of other motors.


Mathematics ◽  
2021 ◽  
Vol 9 (5) ◽  
pp. 543
Author(s):  
Alejandra Ríos ◽  
Eusebio E. Hernández ◽  
S. Ivvan Valdez

This paper introduces a two-stage method based on bio-inspired algorithms for the design optimization of a class of general Stewart platforms. The first stage performs a mono-objective optimization in order to reach, with sufficient dexterity, a regular target workspace while minimizing the elements’ lengths. For this optimization problem, we compare three bio-inspired algorithms: the Genetic Algorithm (GA), the Particle Swarm Optimization (PSO), and the Boltzman Univariate Marginal Distribution Algorithm (BUMDA). The second stage looks for the most suitable gains of a Proportional Integral Derivative (PID) control via the minimization of two conflicting objectives: one based on energy consumption and the tracking error of a target trajectory. To this effect, we compare two multi-objective algorithms: the Multiobjective Evolutionary Algorithm based on Decomposition (MOEA/D) and Non-dominated Sorting Genetic Algorithm-III (NSGA-III). The main contributions lie in the optimization model, the proposal of a two-stage optimization method, and the findings of the performance of different bio-inspired algorithms for each stage. Furthermore, we show optimized designs delivered by the proposed method and provide directions for the best-performing algorithms through performance metrics and statistical hypothesis tests.


Energies ◽  
2021 ◽  
Vol 14 (15) ◽  
pp. 4407
Author(s):  
Mbika Muteba

There is a necessity to design a three-phase squirrel cage induction motor (SCIM) for high-speed applications with a larger air gap length in order to limit the distortion of air gap flux density, the thermal expansion of stator and rotor teeth, centrifugal forces, and the magnetic pull. To that effect, a larger air gap length lowers the power factor, efficiency, and torque density of a three-phase SCIM. This should inform motor design engineers to take special care during the design process of a three-phase SCIM by selecting an air gap length that will provide optimal performance. This paper presents an approach that would assist with the selection of an optimal air gap length (OAL) and optimal capacitive auxiliary stator winding (OCASW) configuration for a high torque per ampere (TPA) three-phase SCIM. A genetic algorithm (GA) assisted by finite element analysis (FEA) is used in the design process to determine the OAL and OCASW required to obtain a high torque per ampere without compromising the merit of achieving an excellent power factor and high efficiency for a three-phase SCIM. The performance of the optimized three-phase SCIM is compared to unoptimized machines. The results obtained from FEA are validated through experimental measurements. Owing to the penalty functions related to the value of objective and constraint functions introduced in the genetic algorithm model, both the FEA and experimental results provide evidence that an enhanced torque per ampere three-phase SCIM can be realized for a large OAL and OCASW with high efficiency and an excellent power factor in different working conditions.


2011 ◽  
Vol 268-270 ◽  
pp. 476-481
Author(s):  
Li Gao ◽  
Ke Lin Xu ◽  
Wei Zhu ◽  
Na Na Yang

A mathematical model was constructed with two objectives. A two-stage hybrid algorithm was developed for solving this problem. At first, the man-hour optimization based on genetic algorithm and dynamic programming method, the model decomposes the flow shop into two layers: sub-layer and patrilineal layer. On the basis of the man-hour optimization,A simulated annealing genetic algorithm was proposed to optimize the sequence of operations. A new selection procedure was proposed and hybrid crossover operators and mutation operators were adopted. A benchmark problem solving result indicates that the proposed algorithm is effective.


Sign in / Sign up

Export Citation Format

Share Document