Effect of Ultraviolet Rays on the Flower Color of Primula malacoides

1977 ◽  
Vol 46 (1) ◽  
pp. 66-71 ◽  
Author(s):  
Ikuo KASHIWAGI ◽  
Yasuo KOBAYASHI ◽  
Tokiharu MATSUKAWA
2017 ◽  
Vol 3 (1) ◽  
Author(s):  
Rahmawati Rahmawati ◽  
Trimayasari Trimayasari ◽  
Ghozali Akhmad Mustaqim ◽  
Wening Dwi Prastiwi ◽  
Emas Agus Prastyo Wibowo

AbstractSoap facial cleanser is needed to keep the facial skin to keep them clean and healthy. The purpose of this study to make soap cleanser with natural materials such as hard water deposits leri. This is because the use of leri water starch or starch granules of fine particles contained in water leri dansel dust can shed the dead skin on the face because of the essential amino acids contained can regenerate skin cells. In addition, water leri can brighten the face because the leri water oryzanol contain substances that can update the development and formation of the pigment melanin, which is effectively to ward off ultraviolet rays. The process of making soap using the principle of saponification reaction, namely the reaction between the oil and the KOH/NaOH. Facial cleansing soap made in this study is solid soap. Based on the results of quality test, soap solid leri water has a pH of 11.1, saponification number is 33, the water content of 46% as well as respondents to the test aspects of aroma and foam shows good results so this water leri treatment can be an alternative solution to prevent the use of soap facial cleansers that contain harmful chemicals. Keywords: air leri, soap cleanser, saponification  AbstrakSabun pembersih wajah sangat diperlukan untuk menjaga kulit wajah agar tetap bersih dan sehat. Tujuan dari penelitian ini untuk membuat sabun pembersih wajah dengan bahan alami berupa endapan air leri. Penggunaan air leri ini dikarenakan butiran partikel starch atau pati halus yang terdapat dalam air leri dapat merontokkan debu dansel kulit mati pada wajah karena asam amino esensial yang terkandung dapat meregenerasi sel-sel kulit. Selain itu, air leri dapat mencerahkan wajah karena air leri mengandung zat oryzanol yang dapat memperbarui perkembangan dan pembentukan pigmen melanin, yang efektif guna menangkal sinar ultraviolet. Proses pembuatan sabun menggunakan prinsip reaksi saponifikasi, yaitu reaksi antara minyak dan KOH/NaOH. Sabun pembersih wajah yang dibuat dalam penelitian ini ialah sabun padat. Berdasarkan hasil uji mutu, sabun air leri padat memiliki pH 11,1, angka penyabunan sebesar 33 kadar air 46 kadar air 46 % serta uji responden terhadap aspek aroma dan busa yang menunjukkan hasil cukup baik sehingga pengolahan air leri ini dapat menjadi solusi alternative untuk mencegah penggunaan sabun pembersih wajah yang mengandung bahan kimia berbahaya. Kata kunci: air leri, sabun pembersih wajah, saponifikasi 


2018 ◽  
Vol 2 (1) ◽  
pp. 1-8 ◽  
Author(s):  
Yogi Udjaja

Skin cancer is an abnormal growth of human skin that can damage skin cells. By knowing the symptoms of skin cancer as early as posssible, it is helpful in preventing the spread of cancer cells and treatment. There are many factors that cause skin cancer, but in general the cause is exposure to ultraviolet rays from the sun.  Therefore, an expert system application is required to detect skin cancer.  By using backward chining and probalility methode; which data is in form of someone’s risk factor and clinical sympthoms, then the application will provide temporary diagnosis.  This application is built in an android platfrom because in its development android is more used than other platforms. The accuracy obtained from this application is 96.67%.


For identification of varieties, it is desirable to use genetically predetermined traits that are decisive for the varietal identification of the distinguishing characteristics of the varieties production and new genotypes for selection. The presence a complete evaluation of the selection samples a particular crop is the basis for the formation of informative databases characteristics the varieties of standards used in plant examination to determine the level of expression a characteristic particular genotype according to the code of their manifestation. For the 20 traits we used to identify, we identified 6 least volatile, highly trait-stable traits over the years of study to identify. These are: “coloring of the pubescence of the main stem”, “the size of the lateral leaf”, “the intensity of green leaf color”, “flower color”, “the intensity of brown bean color”, “basic color of the seed coat”. The other 14 traits are highly variable and unstable among varieties, but may be significant under certain conditions. According to the results of the research we have determined the conformity of the collection varieties by code graduation. In the study, we selected varieties with corresponding codes of attributes of the reference varieties the UPOV technique. On the basic of the color the pubescence of the main stem, 36% varieties are with grey stem pubescence. Among the standards: Apache, Alaric, Talon according to the grey color of the pubescence, we identified varieties Zolotysta, Ozzie, Diona. The 2947 564/84, Stepnaya-90, Knyazhna. The lateral leaf size is a sign that affects the increase in green mass of plants and subsequently on productivity. Graduation of the sign small size of leaf had varieties: Zuma, Ksenya; middle – Heinong 37, Yuh-30; large – 2947 564/84, Vinni, DSS 2504. The following is a sign of the intensity of leaf plate, which is divided by gradation into light, moderate and dark. Among our samples with a light degree of color, we can distinguish Diona, Sribna Ruta, and Zuma. For varieties with moderate gradation of color are selected: Perlyna, 93/99, Knyazhna. To the dark color of the leaf plate we attributed the varieties: Stepnaya-90, Ozzie. Among the varieties we studied of the basics of flower color 37% varieties are with a white flower, and 63% with a purple. According to the varieties of standards: Chandor, Cresir, Toreador to the white color of the flower we attributed varieties Knyazhna, Ozzie, Zolotysta. With the purple color of the flower we have selected varieties: 93/99, Zhemchuzhna, Heinong 37. On the basis of the intensity of brown color bean, which characterizes the generative organs of the plant, is divided into weak, moderate and strong, but the other identifiers there are gradations: sandy, gray, light brown, brown and dark brown, so we decided what would be better identify by color gradation. To the sandy color of the beans we attributed varieties Perlyna, Yuh-30; gray – Sribna Ruta; light brown – Kobza, Knyazhna; brown – Ksenya; dark brown – Zhemchuzhna, Vinni. Important features that identify the description of varieties include basic color of the seed coat, which affects the taste of the seeds. In particular, the seeds are divided by color into yellow – Kobza, Yuh-30; yellow-green – Vinni, Luch Nadezhdy; green – Heorhina; light brown – 2947 564/84, brown – DSS 2504; dark brown – 2974 YS-24 and black color – not detected. Following the results of the previous collection of soybean varieties from the morphological sings of vegetative, generative organs of plants, it was possible to identify varieties with stable manifestation of standard identifying sings of soybean. Collection varieties with one standard characteristics: Heinong 37, Luch Nadezhdy, DSS 2504, 2974 YS-24; two signs: Zolotysta, Diona, Stepnaya-90, Zuma, Ksenya, Heorhina, Sribna Ruta, Perlyna, 93/99, Zhemchuzhna; three signs: Ozzie, 2947 564/84, Yuh-30, Vinni, Knyazhna.


Author(s):  
О. Halak ◽  
N. Poltorak ◽  
О. Kravchuk ◽  
V. Synko ◽  
Y. Korol

Contamination of hazardous chemicals is currently considered one of the major environmental problems. The methods of purification of gaseous emissions depending on the physicochemical properties of pollutants, in particular dangerous chemical, their aggregate state, concentration in the gas environment are studied in this article. The effect of aerosol content such as dust and soot is analyzed as well as the efficiency of purification methods at different temperature intervals, methods of purification of multicomponent mixtures. The comparative characteristics of thermochemical, reagent, sorption and catalytic methods are given and the prospects of their application in filtering systems of stationary and mobile objects are evaluated. It has been proved that almost any organic compounds can be oxidized (mineralized) on the TiO2surface. In practice, any photocatalytic air purifier includes a porous TiO2 deposited carrier, which is irradiated with ultraviolet rays and through which air is purged. Photocatalysis is suitable for domestic use as it can occur at room temperature. For example, a thermocatalytic method of destroying harmful substances requires preheating the air to a temperature above 200 ° C. Photocatalysis destroys substances that penetrate even through activated carbon filters. Features of formation of oxide coatings by plasma-electrolytic oxidation of titanium alloys are considered. It is proposed to refine the design of collective defense systems on armored vehicles and stationary facilities with additional installation in the filter-absorber of the grid with the deposited layer of catalytic material, which will neutralize various types of dangerous chemicals due to photocatalytic air purification.


2012 ◽  
Vol 34 (3) ◽  
pp. 239
Author(s):  
Xiao-Xin TANG ◽  
Shuang-Quan HUANG

2013 ◽  
Vol 47 (5) ◽  
pp. 437-453
Author(s):  
Zhu Manlan ◽  
Wang Liangsheng ◽  
Zhang Huijin ◽  
Xu Yanjun ◽  
Zheng Xuchen ◽  
...  

HortScience ◽  
1998 ◽  
Vol 33 (3) ◽  
pp. 555b-555
Author(s):  
Chiwon W. Lee

Velvet flower (Salpiglossis sinuata, Solanaceae) can be used as an excellent demonstration plant for horticultural crop breeding classes. Salpiglossis produces large trumpet-like flowers exhibiting an assortment of corolla color and pigmentation pattern. The pistil is large (3 to 4 cm long) with a sticky stigmatal tip and anthers can be easily emasculated prior to anthesis. The large pollen grains are shed in tetrads, which can be separated and individually placed on the stigma. It takes 8 to 9 weeks from seeding to blooming, with a prolific flowering cycle repeated in flushes. Numerous seeds (about 750/capsule) are obtained in 3 weeks after self- or cross-pollination. The influences of three genes that control flower color and pigmentation pattern can be conveniently demonstrated with their dominant and recessive alleles. The R gene controls flower color with red (RR or Rr) being dominant over yellow (rr) flower color. The D gene controls the density of pigmentation with solid (DD or Dd) color being dominant over dilute (dd) color. Corolla color striping is controlled by the St gene with striped (stst) being recessive to non-striped (StSt or Stst) pattern. For example, by using diploid lines of genotypes RRDD (red, solid), RRdd (red, dilute), or rrdd (yellow, dilute) and their crosses, students can easily learn a dominant phenotypic expression in the F1 hybrid and the digenic 9:3:3:1 segregation ratio in the F2 progeny. Another gene (C) that controls flower opening can also be used to show its influence on cleistogamous (closed, self-pollinated, CC or Cc) versus normal chasmogamous (open-pollinated, cc) corolla development. In addition, the induction and use of polyploid (4X, 3X) plants in plant breeding can be effectively demonstrated using this species.


Sign in / Sign up

Export Citation Format

Share Document