Payload Derived Position Acquisition System (PDPAS) Algorithm Implementation with the Common Range Integrated Instrumentation System Rapid Prototype Initiative (CRIIS-RPI)

2011 ◽  
Author(s):  
Ryan Tiaden
Keyword(s):  
Rapid Prototype ◽  
Acquisition System ◽  
The Common ◽  
Algorithm Implementation

Developments in the Field of Rapid Prototype Production

2008 ◽  
Vol 589 ◽  
pp. 421-425 ◽  
Author(s):  
Norbert Krisztián Kovács ◽  
József Gábor Kovács
Keyword(s):  
Mechanical Strength ◽  
Porous Structure ◽  
Epoxy Resin ◽  
Rapid Prototype ◽  
Post Treatment ◽  
3D Printer ◽  
Infiltration Depth ◽  
3D Printed ◽  
The Common ◽  
Polymer Engineering

Characteristics of 3D printed specimens are porous structure and low mechanical strength. Due to porous structure post treatment is possible, and in most cases infiltration with an epoxy resin, wax or cyanoacrylate material takes place. As a result of post treatment, the mechanical strength can be increased by 100%, although this is strongly influenced by the infiltration depth that depends on the porous structure and the resin viscosity. In the framework of the common research of the Department of Polymer Engineering, BME and Varinex Zrt. the applicability of a 3D printer is examined in the field of direct tool making. As the first step, the resin uptake ability of specimens prepared with a Z810 3D printer is examined.

The Building of Data Acquisition System Based on Embedded Technology

2012 ◽  
Vol 546-547 ◽  
pp. 481-485
Author(s):  
Ye Hui Liu
Keyword(s):  
Data Acquisition ◽  
Real Time ◽  
Data Storage ◽  
Data Acquisition System ◽  
Acquisition System ◽  
Time Data ◽  
Local Data ◽  
Software Environment ◽  
Data Acquisition Board ◽  
The Common

The common data acquisition system which is proposed in this paper has achieved features of monitoring layer and data collection layer (Complete the construction of ARM9 system board hardware and software environment; implement the design of STM8L acquisition board; design such application modules as host MODBUS, slave MODBUS, parameter setting, real-time data communications, real-time graphical display, local data storage, ADC, digital filtering and so on). Judging from the system test, it can achieve the desired effect, and especially, STM8L ADC data acquisition board has highly precise and consumes low power.

Catalogue reduction techniques

1978 ◽  
Vol 48 ◽  
pp. 389-390 ◽  
Author(s):  
Chr. de Vegt
Keyword(s):  
Adjustment Process ◽  
Proper Motions ◽  
Measuring Process ◽  
Aerial Photogrammetry ◽  
Reduction Techniques ◽  
Observational Technique ◽  
The Common ◽  
Astrometric Data

AbstractReduction techniques as applied to astrometric data material tend to split up traditionally into at least two different classes according to the observational technique used, namely transit circle observations and photographic observations. Although it is not realized fully in practice at present, the application of a blockadjustment technique for all kind of catalogue reductions is suggested. The term blockadjustment shall denote in this context the common adjustment of the principal unknowns which are the positions, proper motions and certain reduction parameters modelling the systematic properties of the observational process. Especially for old epoch catalogue data we frequently meet the situation that no independent detailed information on the telescope properties and other instrumental parameters, describing for example the measuring process, is available from special calibration observations or measurements; therefore the adjustment process should be highly self-calibrating, that means: all necessary information has to be extracted from the catalogue data themselves. Successful applications of this concept have been made already in the field of aerial photogrammetry.

Renilla Bioluminescence: A Morphologic Approach to the Location of Photocytes

1974 ◽  
Vol 32 ◽  
pp. 208-209
Author(s):  
Ben O. Spurlock ◽  
Milton J. Cormier
Keyword(s):  
Excited State ◽  
Ground State ◽  
Molecular Basis ◽  
Light Emission ◽  
Chemical Basis ◽  
Electronic Excited State ◽  
Colonial Form ◽  
The Common ◽  
Eighteenth And Nineteenth Centuries ◽  
Catalyzed Oxidation

The phenomenon of bioluminescence has fascinated layman and scientist alike for many centuries. During the eighteenth and nineteenth centuries a number of observations were reported on the physiology of bioluminescence in Renilla, the common sea pansy. More recently biochemists have directed their attention to the molecular basis of luminosity in this colonial form. These studies have centered primarily on defining the chemical basis for bioluminescence and its control. It is now established that bioluminescence in Renilla arises due to the luciferase-catalyzed oxidation of luciferin. This results in the creation of a product (oxyluciferin) in an electronic excited state. The transition of oxyluciferin from its excited state to the ground state leads to light emission.

Mammalian Bone Marrow Acetylcholinesterase

1982 ◽  
Vol 40 ◽  
pp. 44-45
Author(s):  
Ezzatollah Keyhani
Keyword(s):  
Central Nervous System ◽  
Bone Marrow ◽  
Nervous System ◽  
Common Property ◽  
Extracellular Medium ◽  
The Central Nervous System ◽  
The Common ◽  
Mammalian Bone

Acetylcholinesterase (EC 3.1.1.7) (ACHE) has been localized at cholinergic junctions both in the central nervous system and at the periphery and it functions in neurotransmission. ACHE was also found in other tissues without involvement in neurotransmission, but exhibiting the common property of transporting water and ions. This communication describes intracellular ACHE in mammalian bone marrow and its secretion into the extracellular medium.

Correlation analysis of radiation damage

1978 ◽  
Vol 36 (1) ◽  
pp. 214-215
Author(s):  
R. Hegerl ◽  
A. Feltynowski ◽  
B. Grill
Keyword(s):  
Electron Microscopy ◽  
Independent Random Variables ◽  
Optical Parameters ◽  
Bright Field Image ◽  
Bright Field ◽  
Expectation Value ◽  
All Optical ◽  
Image Element ◽  
Stochastic Series ◽  
The Common

Till now correlation functions have been used in electron microscopy for two purposes: a) to find the common origin of two micrographs representing the same object, b) to check the optical parameters e. g. the focus. There is a third possibility of application, if all optical parameters are constant during a series of exposures. In this case all differences between the micrographs can only be caused by different noise distributions and by modifications of the object induced by radiation.Because of the electron noise, a discrete bright field image can be considered as a stochastic series Pm,where i denotes the number of the image and m (m = 1,.., M) the image element. Assuming a stable object, the expectation value of Pm would be Ηm for all images. The electron noise can be introduced by addition of stationary, mutual independent random variables nm with zero expectation and the variance. It is possible to treat the modifications of the object as a noise, too.

Sign in / Sign up

Export Citation Format

Share Document